Ford 2015 SUPER DUTY Owner’s Manual – IIS Windows Server

image1

January 2014 First Printing Owner’s Manual Super Duty Litho in U.S.A.

image2image3

2015 SUPER DUTY Owner’s Manual

2015 SUPER DUTY Owner’s Manual

FC3J 19A321 AA

image4image5The information contained in this publication was correct at the time of going to print. In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation. No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission. Errors and omissions excepted.

© Ford Motor Company 2014

All rights reserved.

Part Number: 20140123200509

image6image7

image8image9image10image11

image12image13

Table of Contents

image14

Introduction

About This Manual  7

Symbols Glossary  7

Data Recording  9

California Proposition 65  11

Perchlorate  11

Ford Credit  11

Replacement Parts

Recommendation  12

Special Notices  12

Mobile Communications

Equipment  13

Export Unique Options  13

Child Safety

General Information  15

Installing Child Seats  16

Booster Seats  24

Child Seat Positioning  26

Child Safety Locks  27

Safety Belts

Principle of Operation  28

Fastening the Safety Belts  29

Safety Belt Height Adjustment  32

Safety Belt Warning Lamp and Indicator

Chime  32

Safety Belt Minder  33

Child Restraint and Safety Belt

Maintenance  35

Supplementary Restraints

System

Principle of Operation  36

Driver and Passenger Airbags  37

Side Airbags  42

Safety Canopy™  43

Crash Sensors and Airbag Indicator  44

Airbag Disposal  45

image15

1

Keys and Remote Controls

General Information on Radio

Frequencies  46

Remote Control  46

Replacing a Lost Key or Remote

Control  49

MyKey™

Principle of Operation  50

Creating a MyKey  50

Clearing All MyKeys  52

Checking MyKey System Status  52

Using MyKey With Remote Start

Systems  52

MyKey Troubleshooting  53

Locks

Locking and Unlocking  54

Keyless Entry  55

Security

Passive Anti-Theft System  58

Anti-Theft Alarm  59

Steering Wheel

Adjusting the Steering Wheel  60

Audio Control  60

Voice Control  61

Cruise Control  61

Information Display Control  61

Heated Steering Wheel  62

Pedals

Adjusting the Pedals  63

Wipers and Washers

Windshield Wipers  64

Windshield Washers  64

image16

Super Duty (), enUSA

image17image18

Table of Contents

image19

Lighting

Lighting Control  65

Autolamps  65

Instrument Lighting Dimmer  66

Daytime Running Lamps  66

Front Fog Lamps  67

Direction Indicators  67

Interior Lamps  67

Windows and Mirrors

Power Windows  69

Global Opening  70

Exterior Mirrors  70

Interior Mirror  72

Sun Visors  73

Moonroof  73

Instrument Cluster

Gauges  75

Warning Lamps and Indicators  77

Audible Warnings and Indicators  80

Information Displays

General Information  81

Information Messages  92

Climate Control

Manual Climate Control  103

Automatic Climate Control  104

Hints on Controlling the Interior

Climate  106

Heated Windows and Mirrors  108

Remote Start  109

Seats

Sitting in the Correct Position  110

Head Restraints  110

Manual Seats  112

Power Seats  113

image20

2

Memory Function  113

Rear Seats  114

Heated Seats  116

Climate Controlled Seats  118

Front Seat Armrest  119

Rear Seat Armrest  120

Universal Garage Door

Opener

Universal Garage Door Opener  121

Auxiliary Power Points

Auxiliary Power Points  129

Storage Compartments

Center Console  131

Overhead Console  131

Starting and Stopping the

Engine

General Information  132

Ignition Switch  132

Starting a Gasoline Engine  133

Engine Block Heater  134

Fuel and Refueling

Safety Precautions  136

Fuel Quality  137

Running Out of Fuel  138

Refueling  138

Fuel Consumption  140

Emission Control System  141

Transmission

Automatic Transmission  144

Power Take-Off  150

Four-Wheel Drive

Using Four-Wheel Drive  151

image21

Super Duty (), enUSA

image22image23

Table of Contents

image24

Rear Axle

Limited Slip Differential  160

Electronic Locking Differential  160

Brakes

General Information  162

Hints on Driving With Anti-Lock

Brakes  162

Parking Brake  163

Hill Start Assist  163

Traction Control

Principle of Operation  165

Using Traction Control  165

Stability Control

Principle of Operation  167

Using Stability Control  167

Terrain Response

Principle of Operation  170

Using Hill Descent Control  170

Parking Aids

Parking Aid  172

Rear View Camera  173

Cruise Control

Principle of Operation  176

Using Cruise Control  176

Driving Aids

Steering  177

Load Carrying

Load Limit  178

Tailgate  185

Towing

Towing a Trailer  189

Trailer Sway Control  190

Recommended Towing Weights  190

Essential Towing Checks  193

Towing Points  205

Transporting the Vehicle  206

Towing the Vehicle on Four Wheels  207

Driving Hints

Breaking-In  208

Economical Driving  208

Driving Through Water  209

Floor Mats  209

Snowplowing  210

Roadside Emergencies

Roadside Assistance  212

Hazard Warning Flashers  213

Fuel Shutoff  213

Jump Starting the Vehicle  214

Post-Crash Alert System  216

Customer Assistance

Getting the Services You Need  217

In California (U.S. Only)  218

The Better Business Bureau (BBB) Auto

Line Program (U.S. Only)  219

Utilizing the Mediation/Arbitration

Program (Canada Only)  219

Getting Assistance Outside the U.S. and

Canada  220

Ordering Additional Owner’s

Literature  221

Reporting Safety Defects (U.S.

Only)  221

Reporting Safety Defects (Canada

Only)  222

Fuses

Fuse Specification Chart  223

3

image25image26

Super Duty (), enUSA

image27image28

Table of Contents

image29

Changing a Fuse……………………………………..231  Vehicle Storage………………………………………261

Maintenance

General Information  232

Opening and Closing the Hood  232

Under Hood Overview – 6.2L  233

Under Hood Overview – 6.8L  234

Engine Oil Dipstick  235

Engine Oil Check  235

Engine Coolant Check  236

Automatic Transmission Fluid

Check  240

Transfer Case Fluid Check  243

Brake Fluid Check  243

Power Steering Fluid Check  243

Washer Fluid Check  244

Fuel Filter  244

Changing the 12V Battery  244

Checking the Wiper Blades  246

Changing the Wiper Blades  246

Adjusting the Headlamps  247

Removing a Headlamp  248

Changing a Bulb  250

Bulb Specification Chart  252

Changing the Engine Air Filter  254

Vehicle Care

General Information  256

Cleaning Products  256

Cleaning the Exterior  256

Waxing  257

Cleaning the Engine  257

Cleaning the Windows and Wiper

Blades  258

Cleaning the Interior  258

Cleaning the Instrument Panel and

Instrument Cluster Lens  258

Cleaning Leather Seats  259

Repairing Minor Paint Damage  260

Cleaning the Alloy Wheels  261

image30

4

Wheels and Tires

General Information  263

Tire Care  265

Using Snow Chains  282

Tire Pressure Monitoring System  282

Changing a Road Wheel  288

Technical Specifications  299

Capacities and Specific-

ations

Engine Specifications  301

Motorcraft Parts  302

Vehicle Identification Number  303

Vehicle Certification Label  303

Transmission Code Designation  304

Technical Specifications  305

Audio System

General Information  310

Audio unit – Vehicles With: AM/FM  311

Audio unit – Vehicles With: AM/FM/CD/

SYNC  312

Audio unit – Vehicles With: Sony AM/FM/

CD  315

Digital Radio  316

Satellite Radio  318

Audio Input Jack  321

USB Port  321

Media Hub  322

SYNC™

General Information  323

Using Voice Recognition  325

Using SYNC™ With Your Phone  327

SYNC™ Applications and Services  338

Using SYNC™ With Your Media

Player  345

SYNC™ Troubleshooting  353

image31

Super Duty (), enUSA

image32image33

Table of Contents

image34

MyFord Touch™

General Information  359

Settings  366

Entertainment  376

Phone  393

Information  399

Climate  408

Navigation  411

Accessories

Accessories  420

Auxiliary Switches  421

Appendices

End User License Agreement  423

Extended Service Plan

(ESP)

Extended Service Plan (ESP)  438

Scheduled Maintenance

General Maintenance Information  440

Normal Scheduled Maintenance  443

Special Operating Conditions Scheduled

Maintenance  444

Scheduled Maintenance Record  449

5

image35image36

Super Duty (), enUSA

image37image38

6

image39image40

Super Duty (), enUSA

image41image42

Introduction

image43

ABOUT THIS MANUAL

Thank you for choosing Ford. We recommend that you take some time to get to know your vehicle by reading this manual. The more that you know about it, the greater the safety and pleasure you will get from driving it.

WARNING

image44

Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that

image45

you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any handheld device while driving and encourage the use of voice-operated systems when possible. Make sure you are aware of all applicable local laws that may affect the use of electronic devices while driving.

image46

Note: This manual describes product features and options available throughout the range of available models, sometimes even before they are generally available. It may describe options not fitted to your vehicle.

Note: Some of the illustrations in this manual may be used for different models, so may appear different to you on your vehicle. However, the essential information in the illustrations is always correct.

Note: Always use and operate your vehicle in line with all applicable laws and regulations.

Note: Pass on this manual when selling your vehicle. It is an integral part of the vehicle.

7

image47

Note: Either Ford Motor Company or an authorized Ford dealer may have originally sold this incomplete vehicle to a vehicle modifier who upfitted it. As a result, some of the options and features on this vehicle may differ from what we describe in this manual.

This manual may qualify the location of a component as left-hand side or right-hand side. The side is determined when facing forward in the seat.

image48

E154903

ARight-hand side B Left-hand side

Protecting the Environment

You must play your part in protecting the environment. Correct vehicle usage and the authorized disposal of waste, cleaning and lubrication materials are significant steps toward this aim.

SYMBOLS GLOSSARY

These are some of the symbols you may see on your vehicle.

Safety alert

image49

See Owner’s Manual

image50image51

Super Duty (), enUSA

image52image53

Introduction

image54

Air conditioning system

image55

E162384

Anti-lock braking system

image56

Avoid smoking, flames or sparks

image57

Battery

image58

Battery acid

image59

Brake fluid – non petroleum

image60

based

Brake system

image61

Cabin air filter

image62

Check fuel cap

image63

Child safety door lock or unlock

image64

Child seat lower anchor

image65

Child seat tether anchor

image66

Cruise control

image67

E71340

Engine air filter

image68

Engine coolant

image69

Engine coolant temperature

image70

Engine oil

image71

Explosive gas

image72

Fan warning

image73

Fasten safety belt

image74

Front airbag

image75

Front fog lamps

image76

Fuel pump reset

image77

Fuse compartment

image78

Hazard warning flashers

image79

Heated rear window

image80

Do not open when hot  Heated windshield

image81image82

E91392 image83

Interior luggage compartment

image84

release

8

image85image86

Super Duty (), enUSA

image87image88

Introduction

image89

Jack

image90

Keep out of reach of children

image91

E161353

Lighting control

image92

Low tire pressure warning

image93

Maintain correct fluid level

image94

Note operating instructions

image95

Panic alarm

image96

Parking aid

image97

E139213

Parking brake

image98

Power steering fluid

image99

Power windows front/rear

image100

Power window lockout

image101

Service engine soon

image102

Side airbag

image103image104

Shield the eyes

image105

Stability control

image106

Windshield wash and wipe

image107

DATA RECORDING

Service Data Recording

Service data recorders in your vehicle are capable of collecting and storing diagnostic information about your vehicle. This potentially includes information about the performance or status of various systems and modules in the vehicle, such as engine, throttle, steering or brake systems. In order to properly diagnose and service your vehicle, Ford Motor Company, Ford of Canada, and service and repair facilities may access or share among them vehicle diagnostic information received through a direct connection to your vehicle when diagnosing or servicing your vehicle. Additionally, when your vehicle is in for service or repair, Ford Motor Company, Ford of Canada, and service and repair facilities may access or share among them data for vehicle improvement purposes. For U.S. only (if equipped), if you choose to use the SYNC Vehicle Health Report, you consent that certain diagnostic information may also be accessed electronically by Ford Motor Company and Ford authorized service facilities, and that the diagnostic information may be used for any purpose. See SYNC™ (page 323).

9

image108

Super Duty (), enUSA

image109image110

Introduction

image111

Event Data Recording

This vehicle is equipped with an event data recorder. The main purpose of an event data recorder is to record, in certain crash or near crash-like situations, such as an airbag deployment or hitting a road obstacle; this data will assist in understanding how a vehicle’s systems performed. The event data recorder is designed to record data related to vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less.

The event data recorder in this vehicle is designed to record such data as:

How various systems in your vehicle were operating;

Whether or not the driver and passenger safety belts were buckled/fastened;

How far (if at all) the driver was depressing the accelerator and/or the brake pedal; and

How fast the vehicle was traveling; and

Where the driver was positioning the steering wheel.

This data can help provide a better understanding of the circumstances in which crashes and injuries occur.

10

image112

Note: Event data recorder data is recorded by your vehicle only if a non-trivial crash situation occurs; no data is recorded by the event data recorder under normal driving conditions and no personal data or information (e.g., name, gender, age, and crash location) is recorded (see limitations regarding 911 Assist and Traffic, directions and Information privacy below). However, parties, such as law enforcement, could combine the event data recorder data with the type of personally identifying data routinely acquired during a crash investigation.

To read data recorded by an event data recorder, special equipment is required, and access to the vehicle or the event data recorder is needed. In addition to the vehicle manufacturer, other parties, such as law enforcement, that have such special equipment, can read the information if they have access to the vehicle or the event data recorder. Ford Motor Company and Ford of Canada do not access event data recorder information without obtaining consent, unless pursuant to court order or where required by law enforcement, other government authorities or other third parties acting with lawful authority. Other parties may seek to access the information independently of Ford Motor Company and Ford of Canada.

image113

Super Duty (), enUSA

image114image115

Introduction

image116

Note: Including to the extent that any law pertaining to Event Data Recorders applies to SYNC or its features, please note the following: Once 911 Assist (if equipped) is enabled (set ON), 911 Assist may, through any paired and connected cell phone, disclose to emergency services that the vehicle has been in a crash involving the deployment of an airbag or, in certain vehicles, the activation of the fuel pump shut-off. Certain versions or updates to 911 Assist may also be capable of being used to electronically or verbally provide to 911 operators the vehicle location (such as latitude and longitude), and/or other details about the vehicle or crash or personal information about the occupants to assist 911 operators to provide the most appropriate emergency services. If you do not want to disclose this information, do not activate the 911 Assist feature. See SYNC™ (page 323).

Additionally, when you connect to Traffic, Directions and Information (if equipped, U.S. only), the service uses GPS technology and advanced vehicle sensors to collect the vehicle’s current location, travel direction, and speed (“vehicle travel information”), only to help provide you with the directions, traffic reports, or business searches that you request. If you do not want Ford or its vendors to receive this information, do not activate the service. For more information, see Traffic, Directions and Information, Terms and Conditions. See SYNC™ (page 323).

11

image117

CALIFORNIAPROPOSITION65

WARNING

image118

Some constituents of engine exhaust, certain vehicle components, certain fluids contained in vehicles

image119

and certain products of component wear contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

image120

PERCHLORATE

Certain components in your vehicle such as airbag modules, safety belt pretensioners and remote control batteries may contain perchlorate material. Special handling may apply for service or vehicle end of life disposal. For more information visit:

image121

Web Address

www.dtsc.ca.gov/hazardouswaste/ perchlorate

FORD CREDIT

(U.S. Only)

Ford Credit offers a full range of financing and lease plans to help you acquire your vehicle. If you have financed or leased your vehicle through Ford Credit, thank you for your business.

For your convenience we offer a number of ways to contact us, as well as help manage your account.

Phone: 1-800-727-7000

For more information regarding Ford Credit, as well as access Account Manager, please go to www.fordcredit.com.

image122

Super Duty (), enUSA

image123image124

Introduction

image125

REPLACEMENT PARTS RECOMMENDATION

Your vehicle has been built to the highest standards using quality parts. We recommend that you demand the use of genuine Ford and Motorcraft parts whenever your vehicle requires scheduled maintenance or repair. You can clearly identify genuine Ford and Motorcraft parts by looking for the Ford, FoMoCo or Motorcraft branding on the parts or their packaging.

Scheduled Maintenance and Mechanical Repairs

One of the best ways for you to make sure that your vehicle provides years of service is to have it maintained in line with our recommendations using parts that conform to the specifications detailed in this Owner’s Manual. Genuine Ford and Motorcraft parts meet or exceed these specifications.

Collision Repairs

We hope that you never experience a collision, but accidents do happen. Genuine Ford replacement collision parts meet our stringent requirements for fit, finish, structural integrity, corrosion protection and dent resistance. During vehicle development we validate these parts deliver the intended level of protection as a whole system. A great way to know for sure you are getting this level of protection is to use genuine Ford replacement collision parts.

12

image126

Warranty on Replacement Parts

Genuine Ford and Motorcraft replacement parts are the only replacement parts that benefit from a Ford Warranty. Damage caused to your vehicle as a result of the failure of non-Ford parts may not be covered by the Ford Warranty. For additional information, refer to the terms and conditions of the Ford Warranty.

SPECIAL NOTICES

New Vehicle Limited Warranty

For a detailed description of what is covered and what is not covered by your vehicle’s New Vehicle Limited Warranty, refer to the Warranty Manual that is provided to you along with your Owner’s Manual.

Special Instructions

For your added safety, your vehicle is fitted with sophisticated electronic controls.

WARNINGS

image127

Failure to follow the specific warnings and instructions could result in personal injury. See

image128

Supplementary Restraints System (page 36).

Front seat mounted rear-facing child or infant seats should NEVER be placed in front of an active

image129

passenger airbag.

image130

Using your Vehicle with a Snowplow

More information and guidelines for using your vehicle with a snowplow in this Owner’s Manual. See Snowplowing (page 210).

image131

Super Duty (), enUSA

image132image133

Introduction

image134

Using your Vehicle as an Ambulance

If your light truck is equipped with the Ford Ambulance Preparation Package, it may be utilized as an ambulance. Ford urges ambulance manufacturers to follow the recommendations of the Ford Incomplete Vehicle Manual, Ford Truck Body Builder’s Layout Book and the Qualified Vehicle Modifiers (QVM) Guidelines as well as pertinent supplements. For additional information, please contact the Truck Body Builders Advisory Service at http://www.fleet.ford.com/truckbbas/ and then by selecting Contact Us or by phone at 1–877–840–4338.

Use of your Ford light truck as an ambulance, without the Ford Ambulance Preparation Package voids the Ford New Vehicle Limited Warranty and may void the emissions warranties. In addition, ambulance usage without the preparation package could cause high underbody temperatures, overpressurized fuel and a risk of spraying fuel which could lead to fires.

If your vehicle is equipped with the Ford Ambulance Preparation Package, it will be indicated on the Safety Compliance Certification Label. The label is located on the driver’s side door pillar or on the rear edge of the driver’s door. You can determine whether the ambulance manufacturer followed Ford’s recommendations by directly contacting that manufacturer. Ford Ambulance Preparation Package is only available on certain Diesel engine equipped vehicles.

Using your Vehicle as a Stationary Power Source

Information and guidelines for operating a vehicle equipped with an aftermarket power take-off system can be found in this Owner’s Manual. See Power Take-Off (page 150).

MOBILE COMMUNICATIONS EQUIPMENT

Using mobile communications equipment is becoming increasingly important in the conduct of business and personal affairs. However, you must not compromise your own or others’ safety when using such equipment. Mobile communications can enhance personal safety and security when appropriately used, particularly in emergency situations. Safety must be paramount when using mobile communications equipment to avoid negating these benefits. Mobile communication equipment includes, but is not limited to, cellular phones, pagers, portable email devices, text messaging devices and portable two-way radios.

WARNING

image135

Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that

image136

you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible. Make sure you are aware of all applicable local laws that may affect the use of electronic devices while driving.

image137

EXPORT UNIQUE OPTIONS

For your particular global region, your vehicle may be equipped with features and options that are different from the features and options that are described in this Owner’s Manual. A market unique supplement may be supplied that complements this book. By referring to the market unique supplement, if provided, you can properly identify those features, recommendations and specifications that

13

image138image139

Super Duty (), enUSA

image140image141

Introduction

image142

are unique to your vehicle. This Owner’s Manual is written primarily for the U.S. and Canadian Markets. Features or equipment listed as standard may be different on units built for Export. Refer to this Owner’s Manual for all other required

information and warnings.

14

image143image144

Super Duty (), enUSA

image145image146

Child Safety

image147

GENERAL INFORMATION

See the following sections for directions on how to properly use safety restraints for children.

WARNINGS

image148

Always make sure your child is secured properly in a device that is appropriate for their height, age and

image149

weight. Child safety restraints must be bought separately from your vehicle. Failure to follow these instructions and guidelines may result in an increased risk of serious injury or death to your child.

All children are shaped differently. The recommendations for safety restraints are based on probable

image150

child height, age and weight thresholds from National Highway Traffic Safety Administration and other safety organizations, or are the minimum

image151

WARNINGS

image152

requirements of law. Ford recommends checking with a NHTSA Certified Child Passenger Safety Technician (CPST) and consult your pediatrician to make sure your child seat is appropriate for your child, and is compatible with and properly installed in your vehicle. To locate a child seat fitting station and CPST, contact the NHTSA toll free at 1-888-327-4236 or go to http://www.nhtsa.dot.gov. In Canada, check with your local St. John Ambulance office for referral to a CPST or for further information, contact your provincial ministry of transportation, locate your local St. John Ambulance office by searching for St. John Ambulance on the internet, or Transport Canada at 1-800-333-0371 (http://www.tc.gc.ca). Failure to properly restrain children in safety seats made especially for their height, age, and weight may result in an increased risk of serious injury or death to your child.

image153

15

image154

Super Duty (), enUSA

image155image156

Child Safety

image157

Recommendations for Safety Restraints for Children

image158

Child

Child size, height, weight, or age

Recommended restraint

type

Infants or

Children weighing 40 lb (18 kg) or less

Use a child safety seat

toddlers

(generally age four or younger).

(sometimes called an

infant carrier, convertible

seat, or toddler seat).

Small children

Children who have outgrown or no longer

Use a belt-positioning

properly fit in a child safety seat (gener-

booster seat.

ally children who are less than 4 ft. 9 in.

(1.45 m) tall, are greater than age four

and less than age 12, and between 40 lb

(18 kg) and 80 lb (36 kg) and upward to

100 lb (45 kg) if recommended by your

child restraint manufacturer).

Larger children

Children who have outgrown or no longer

Use a vehicle safety belt

properly fit in a belt-positioning booster

having the lap belt snug

seat (generally children who are at least

and low across the hips,

4 ft. 9 in. (1.45 m) tall or greater than 80

shoulder belt centered

lb (36 kg) or 100 lb (45 kg) if recom-

across the shoulder and

mended by child restraint manufacturer).

chest, and seat back

upright.

You are required by law to properly use safety seats for infants and toddlers in the United States and Canada.

Many states and provinces require that small children use approved booster seats until they reach age eight, a height of 4 feet 9 inches (1.45 meters) tall, or 80 pounds (36 kilograms). Check your local and state or provincial laws for specific requirements about the safety of children in your vehicle.

When possible, always properly restrain children 12 years of age and under in a rear seating position of your vehicle. Accident statistics suggest that children are safer when properly restrained in the rear seating positions than in a front seating position.

INSTALLING CHILD SEATS

Child Seats

image159

E142594

16

image160image161

Super Duty (), enUSA

image162image163

Child Safety

image164

Use a child safety seat (sometimes called an infant carrier, convertible seat, or toddler seat) for infants, toddlers, or children weighing 40 pounds (18 kilograms) or less (generally age four or younger).

Using Lap and Shoulder Belts

WARNINGS

image165

Airbags can kill or injure a child in a child seat. Never place a rear-facing child seat in front of an active airbag.

image166

If you must use a forward-facing child seat in the front seat, move the seat upon which the child seat is installed all the way back.

Airbags can kill or injure a child in a child seat. Children 12 and under should be properly restrained in the

image167

rear seat whenever possible.

Depending on where you secure a child restraint, and depending on the child restraint design, you may block

image168

access to certain safety belt buckle assemblies and LATCH lower anchors, rendering those features potentially unusable. To avoid risk of injury, occupants should only use seating positions where they are able to be properly restrained.

image169

When installing a child safety seat with combination lap and shoulder belts:

Use the correct safety belt buckle for that seating position.

Insert the belt tongue into the proper buckle until you hear a snap and feel it latch. Make sure the tongue is securely fastened in the buckle.

Keep the buckle release button pointing up and away from the safety seat, with the tongue between the child seat and the release button, to prevent accidental unbuckling.

17

image170

Place the vehicle seat upon which the child seat will be installed in the upright position.

This vehicle does not require the use of a locking clip.

Perform the following steps when installing the child seat with combination lap and shoulder belts:

Note: Although the child seat illustrated is a forward facing child seat, the steps are the same for installing a rear facing child seat.

image171

E142528

1.Position the child safety seat in a seat with a combination lap and shoulder belt.

image172

E142529

2.Pull down on the shoulder belt and then grasp the shoulder belt and lap belt together.

image173

Super Duty (), enUSA

image174image175

Child Safety

image176image177image178

E142530

3.While holding the shoulder and lap belt portions together, route the tongue through the child seat according to the child seat manufacturer’s instructions. Be sure the belt webbing is not twisted.

image179

E142531

4.Insert the belt tongue into the proper buckle (the buckle closest to the direction the tongue is coming from) for that seating position until you hear a snap and feel the latch engage. Make sure the tongue is latched securely by pulling on it.

E142875

5.To put the retractor in the automatic locking mode, grasp the shoulder portion of the belt and pull downward until all of the belt is pulled out.

6.Allow the belt to retract to remove slack. The belt will click as it retracts to indicate it is in the automatic locking mode.

7.Try to pull the belt out of the retractor to make sure the retractor is in the automatic locking mode (you should not be able to pull more belt out). If the retractor is not locked, unbuckle the belt and repeat Steps 5 and 6.

image180

E142533

8.Remove remaining slack from the belt. Force the seat down with extra weight, for example, by pressing down or kneeling on the child restraint while pulling up on the shoulder belt in order to force slack from the belt. This is necessary to remove the remaining slack that will exist once the extra

18

image181image182

Super Duty (), enUSA

image183image184

Child Safety

image185

weight of the child is added to the child restraint. It also helps to achieve the proper snugness of the child seat to your vehicle. Sometimes, a slight lean toward the buckle will help to remove remaining slack from the belt.

9.Attach the tether strap (if the child seat is equipped).

image186

E142534

10.Before placing the child in the seat, forcibly move the seat forward and back to make sure the seat is securely held in place.

To check this, grab the seat at the belt path and attempt to move it side to side and forward and back. There should be no more than 1 inch (2.5 centimeters) of movement for proper installation.

Ford recommends checking with a NHTSA Certified Child Passenger Safety Technician to make certain the child restraint is properly installed. In Canada, check with your local St. John Ambulance office for referral to a Certified Passenger Seat Technician.

19

image187

Using Cinch Tongue Lap and Shoulder Belts (All Front Center, Super Cab and Crew Cab Rear Center Positions)

WARNINGS

image188

Airbags can kill or injure a child in a child seat. If you must use a forward-facing child seat in the front

image189

seat, move seat upon which the child seat is installed all the way back.

Rear facing child seats should never be placed in front of an active airbag.

image190

Always use both lap and shoulder safety belt in the Regular Cab center seating position if applicable.

image191image192

The belt webbing below the tongue is the lap portion of the combination lap and shoulder belt, and the belt webbing above the tongue is the shoulder belt portion of the combination lap and shoulder belt.

image193

E142528

1.Position the child safety seat in the front center seat.

image194

Super Duty (), enUSA

image195image196

Child Safety

image197

E162708

image198

2.  Slide the tongue up the webbing.

image199

E142530

3.While holding both shoulder and lap portions next to the tongue, route the tongue and webbing through the child seat according to the child seat manufacturer’s instructions. Be sure that the belt webbing is not twisted.

image200

E142531

4.Insert the belt tongue into the proper buckle (the buckle closest to the direction the tongue is coming from) for that seating position until you hear a snap and feel the latch engage. Make sure the tongue is latched securely by pulling on it.

image201

E142533

5.While pushing down with your knee on the child seat pull up on the shoulder belt portion to tighten the lap belt portion of the combination lap and shoulder belt.

6.Allow the safety belt to retract and remove any slack in the belt to securely tighten the child safety seat in the vehicle.

7.Attach the tether strap (if the child seat is equipped).

image202

E142534

20

image203image204

Super Duty (), enUSA

image205image206

Child Safety

image207

8.Before placing the child in the seat, forcibly move the seat forward and back to make sure the seat is securely held in place. To check this, grab the seat at the belt path and attempt to move it side to side and forward and back. There should be no more than 1 inch (2.5 centimeters) of movement for proper installation.

9.Check from time to time to be sure that there is no slack in the lap and shoulder belt. The shoulder belt must be snug to keep the lap belt tight during a crash.

Ford recommends checking with a NHTSA Certified Child Passenger Safety Technician to make certain the child restraint is properly installed. In Canada, check with your local St. John Ambulance office for referral to a Child Passenger Safety Technician.

Using Lower Anchors and Tethers for CHildren (LATCH)

The LATCH system is composed of three vehicle anchor points: two lower anchors located where the vehicle seatback and seat cushion meet (called the seat bight) and one top tether anchor located behind that seating position. Your vehicle is not equipped with the lower anchor points in the seat bight. For this vehicle, use the vehicle safety belt and upper tether to secure a child seat.

image208

Using Tether Straps

Many forward-facing child safety seats include a tether strap which extends from the back of the child safety seat and hooks to an anchoring point called the top tether anchor. Tether straps are available as an accessory for many older safety seats. Contact the manufacturer of your child seat for information about ordering a tether strap, or to obtain a longer tether strap if the tether strap on your safety seat does not reach the appropriate top tether anchor in the vehicle.

The passenger seats of your vehicle may be equipped with built-in tether strap anchors located behind the seats as described below.

The tether anchors in your vehicle may be straps on the seat back or an anchor bracket mounted to the body shell on the back panel.

The SuperCab rear seat has three straps behind the top of the seatback that function as both routing loops for the tether straps and anchor loops.

The tether strap anchors in your vehicle are in the following positions (shown from top view):

image209

E162709

21

image210image211

Super Duty (), enUSA

image212image213

Child Safety

image214

F-Series Regular Cab

image215

E162710

F-Series SuperCab

image216

E162711

F-Series Crew Cab

Attach the tether strap only to the appropriate tether anchor as shown. The tether strap may not work properly if attached somewhere other than the correct tether anchor.

Once the child safety seat has been installed using the safety belt, you can attach the top tether strap.

Tether Strap Attachment

1.Route the child safety seat tether strap over the back of the seat.

image217

22

Note: For vehicles with adjustable head restraints, route the tether strap under the head restraint and between the head restraint posts, otherwise route the tether strap over the top of the seat back. If the top of the safety seat hits the head restraint, raise the head restraint to let the child seat fit further rearward.

2.Locate the correct anchor for the selected seating position.

3.You may need to pull the seatback forward to access the tether anchors. Make sure the seat is locked in the upright position before installing the child seat.

image218

Super Duty (), enUSA

image219image220

Child Safety

image221

E162712

image222

4.Remove the tether cover.

5.Clip the tether strap to the anchor as shown.

image223

E162713

Front seats (Regular Cab) and Rear seats (Crew Cab)

If the tether strap is clipped incorrectly, the child safety seat may not be retained properly in the event of a crash.

6.Tighten the child safety seat tether strap according to the manufacturer’s instructions.

If the safety seat is not anchored properly, the risk of a child being injured in a crash greatly increases.

If your child restraint system is equipped with a tether strap, and the child restraint manufacturer recommends its use, Ford also recommends its use.

23

image224

Tether Strap Attachment (Rear SuperCab Only)

There are three loops of webbing just above the back of the rear seat (along the bottom edge of the rear window) in the SuperCab. Use these loops as both routing loops and anchor loops for up to three child safety seat tether straps.

You can secure these straps below the back of the seat with rubber bands. To access, reach below the back of the seat and pull the tether loop out of the rubber band securing it.

Many tether straps cannot be tightened if the tether strap is hooked to the loop directly behind the child seat. To provide a tight tether strap:

image225

E162714

1.Route the tether strap through the loop directly behind the child seat.

image226

E162715

image227

Super Duty (), enUSA

image228image229

Child Safety

image230

2.Attach the strap hook onto the loop behind an adjacent seating position.

image231

E162716

3.Install the child safety seat tightly using the vehicle belts. Follow the instructions in this chapter.

4.Tighten the tether strap according to the child seat manufacturer’s instructions.

You can use a single loop to route and anchor more than one child seat. For example, use the center loop as a routing loop for a child safety seat in the center rear seat and as an anchoring loop for child seats installed in the outboard rear seats.

80 pounds (36 kilograms) and upward to

100 pounds (45 kilograms) if recommended by your child restraint manufacturer). Many state and provincial laws require that children use approved booster seats until they reach age eight, a height of 4 feet 9 inches (1.45 meters) tall, or 80 pounds (36 kilograms).

Booster seats should be used until you can answer YES to ALL of these questions when seated without a booster seat:

image232

E142595

Can the child sit all the way back against their vehicle seat back with knees bent comfortably at the edge of the seat cushion?

BOOSTER SEATS

WARNING

image233

Never place, or allow a child to place, the shoulder belt under a child’s arm or behind the back because it

image234

reduces the protection for the upper part of the body and may increase the risk of injury or death in a crash.

image235

Use a belt-positioning booster seat for children who have outgrown or no longer properly fit in a child safety seat (generally children who are less than 4 feet 9 inches (1.45 meters) tall, are greater than age four

(4)and less than age twelve (12), and between 40 pounds (18 kilograms) and

24

image236

Can the child sit without slouching?

Does the lap belt rest low across the hips?

Is the shoulder belt centered on the shoulder and chest?

Can the child stay seated like this for the whole trip?

Always use booster seats in conjunction with your vehicle lap and shoulder belt.

image237

Super Duty (), enUSA

image238image239

Child Safety

image240

Types of Booster Seats

image241

E68924

Backless booster seats

If your backless booster seat has a removable shield, remove the shield. If a vehicle seating position has a low seat back or no head restraint, a backless booster seat may place your child’s head (as measured at the tops of the ears) above the top of the seat. In this case, move the backless booster to another seating position with a higher seat back or head restraint and lap and shoulder belts, or consider using a high back booster seat.

image242

E70710

image243

High back booster seats

If, with a backless booster seat, you cannot find a seating position that adequately supports your child’s head, a high back booster seat would be a better choice.

Children and booster seats vary in size and shape. Choose a booster that keeps the lap belt low and snug across the hips, never up across the stomach, and lets you adjust the shoulder belt to cross the chest and rest snugly near the center of the shoulder. The following drawings compare the ideal fit (center) to a shoulder belt uncomfortably close to the neck and a shoulder belt that could slip off the shoulder. The drawings also show how the lap belt should be low and snug across the child’s hips.

image244

E142596

25

image245image246

Super Duty (), enUSA

image247image248

Child Safety

image249image250

E142597

If the booster seat slides on the vehicle seat upon which it is being used, placing a rubberized mesh sold as shelf or carpet liner under the booster seat may improve this condition. Do not introduce any item thicker than this under the booster seat. Check with the booster seat manufacturer’s instructions.

CHILD SEAT POSITIONING

WARNINGS

image251

Airbags can kill or injure a child in a child seat. Never place a rear-facing child seat in front of an active airbag.

image252

If you must use a forward-facing child seat in the front seat, move the vehicle seat upon which the child seat is installed all the way back. When possible, all children age 12 and under should be properly restrained in a rear seating position. If all children cannot be seated and restrained properly in a rear seating position, properly restrain the largest child in the front seat.

Always carefully follow the instructions and warnings provided by the manufacturer of any child

image253

restraint to determine if the restraint device is appropriate for your child’s size, height, weight, or age. Follow the child restraint manufacturer’s instructions and warnings provided for installation and use in conjunction with the instructions and

26

image254

WARNINGS

image255

warnings provided by your vehicle manufacturer. A safety seat that is improperly installed or utilized, is inappropriate for your child’s height, age, or weight or does not properly fit the child may increase the risk of serious injury or death.

Never let a passenger hold a child on his or her lap while your vehicle is moving. The passenger cannot

image256

protect the child from injury in a crash, which may result in serious injury or death.

Never use pillows, books, or towels to boost a child. They can slide around and increase the likelihood

image257

of injury or death in a crash.

Always restrain an unoccupied child seat or booster seat. These objects may become projectiles in a crash or

image258

sudden stop, which may increase the risk of serious injury.

Never place, or allow a child to place, the shoulder belt under a child’s arm or behind the back because it

image259

reduces the protection for the upper part of the body and may increase the risk of injury or death in a crash.

To avoid risk of injury, do not leave children or pets unattended in your vehicle.

image260image261image262

Super Duty (), enUSA

image263image264

Child Safety

image265

Recommendations for attaching child safety restraints for children

image266

Restraint

Combined

Use any attachment method as indicated below by X

Type

child and

LATCH

LATCH

Safety belt

Safety belt

Safety belt

seat

weight

(lower

(lower

and top

and LATCH

only

anchors

anchors

tether

(lower

and top

only)

anchor

anchors

tether

and top

anchor)

tether

anchor)

Rear facing

Up to 65 lb

X

child seat

(29 kg)

Rear facing

Over 65 lb

X

child seat

(29 kg)

Forward

Up to 65 lb

X

facing

(29 kg)

child seat

Forward

Over 65 lb

X

facing

(29 kg)

child seat

Note: The child seat must rest tightly against the vehicle seat upon which it is installed. It may be necessary to lift or remove the head restraint. See Head Restraints (page 110).

image267

CHILD SAFETY LOCKS

When these locks are set, the rear doors cannot be opened from the inside.

E162719

The childproof locks are located on the

rear edge of each rear door. You must set

the lock separately for each door.

Move the lock control up or down to

engage or disengage the childproof lock.

27

image268image269

Super Duty (), enUSA

image270image271

Safety Belts

image272

PRINCIPLE OF OPERATION

WARNINGS

image273

Always drive and ride with your seat back upright and the lap belt snug and low across the hips.

image274

To reduce the risk of injury, make sure children sit where they can be properly restrained.

image275

Never let a passenger hold a child on his or her lap while the vehicle is moving. The passenger cannot

image276

protect the child from injury in a crash which may result in serious injury or death.

All occupants of the vehicle, including the driver, should always properly wear their safety belts, even

image277

when an airbag supplemental restraint system is provided. Failure to properly wear your safety belt could seriously increase the risk of injury or death.

It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a crash, people riding in

image278

these areas are more likely to be seriously injured or killed. Do not allow people to ride in any area of your vehicle that is not equipped with seats and safety belts. Be sure everyone in your vehicle is in a seat and using a safety belt properly.

In a rollover crash, an unbelted person is significantly more likely to die than a person wearing a safety

image279

belt.

Each seating position in your vehicle has a specific safety belt assembly which is made up of one buckle and

image280

one tongue that are designed to be used as a pair. 1) Use the shoulder belt on the outside shoulder only. Never wear the shoulder belt under the arm. 2) Never swing the safety belt around your neck over the inside shoulder. 3) Never use a single belt for more than one person.

28

image281

WARNINGS

image282

When possible, all children 12 years old and under should be properly restrained in a rear seating position.

image283

Failure to follow this could seriously increase the risk of injury or death.

Safety belts and seats can become hot in a vehicle that has been closed up in sunny weather; they could burn

image284

a small child. Check seat covers and buckles before you place a child anywhere near them.

Front and rear seat occupants, including pregnant women, should wear safety belts for optimum

image285

protection in an accident.

image286

All seating positions in this vehicle have lap and shoulder safety belts. All occupants of the vehicle should always properly wear their safety belts, even when an airbag supplemental restraint system is provided.

The safety belt system consists of:

Lap and shoulder safety belts.

Shoulder safety belt with automatic locking mode, (except driver safety belt).

Height adjuster at the front outboard seating positions.

Safety belt pretensioner at the front outboard seating positions.

Safety belt warning light and chime.

Crash sensors and monitoring system with readiness indicator.

image287image288image289

Super Duty (), enUSA

image290image291

Safety Belts

image292

The safety belt pretensioners at the front seating positions are designed to tighten the safety belts when activated. In frontal and near-frontal crashes, side crashes and rollovers, the safety belt pretensioners may be activated alone or, if the crash is of sufficient severity, together with the front airbags.

FASTENING THE SAFETY BELTS

The front outboard and rear safety restraints in the vehicle are combination lap and shoulder belts.

image293

2.To unfasten, press the release button and remove the tongue from the buckle.

Using the Safety Belt with Cinch Tongue (Front Center and Rear Center Seats Only)

The cinch tongue will slide up and down the belt webbing when the belt is stowed or while putting safety belts on. When the lap and shoulder safety belt is buckled, the cinch tongue will allow the lap portion to be shortened, but pinches the webbing to keep the lap portion from getting longer.

The cinch tongue is designed to slip during a crash, so always wear the shoulder belt properly and do not allow any slack in either the lap or shoulder portions.

Before you can reach and latch a lap and shoulder belt having a cinch tongue into the buckle, you may have to lengthen the lap belt portion of it.

image294

E142587

1.  Insert the belt tongue into the proper buckle (the buckle closest to the

direction the tongue is coming from)

until you hear a snap and feel it latch.

Make sure the tongue is securely

fastened in the buckle.

E162708

1.

To lengthen the lap belt, pull some

webbing out of the shoulder belt

retractor.

2.

While holding the webbing below the

tongue, grasp the tip (metal portion)

of the tongue so that it is parallel to the

webbing and slide the tongue upward.

3.

Provide enough lap belt length so that

the tongue can reach the buckle.

image295

E142588

29

image296image297

Super Duty (), enUSA

image298image299

Safety Belts

image300

Fastening the Cinch Tongue

image301

WARNING

image302

The lap belt should fit snugly and as low as possible around the hips, not across the waist.

image303image304

1.  Pull the lap and shoulder belt from the retractor so that the shoulder belt portion of the safety belt crosses your shoulder and chest.

E142590

2.Be sure the belt is not twisted. If the belt is twisted, remove the twist.

3.Insert the belt tongue into the proper buckle for your seating position until you hear a snap and feel it latch.

4.Make sure the tongue is securely fastened to the buckle by pulling on the tongue.

While you are fastened in the safety belt, the lap and shoulder belt with a cinch tongue adjusts to your movement. However, if you brake hard, turn hard, or if your vehicle receives an impact of 5 mph (8 km/h) or more, the safety belt will become locked and help reduce your forward movement.

Using Safety Belts During Pregnancy

WARNING

image305

Always ride and drive with your seatback upright and the safety belt properly fastened. The lap portion of

image306

the safety belt should fit snug and be positioned low across the hips. The shoulder portion of the safety belt should be positioned across the chest. Pregnant women should also follow this practice. See the following figure.

image307image308

Pregnant women should always wear their safety belt. Position the lap belt portion of a combination lap and shoulder belt low across the hips below the belly and worn as tight as comfort will allow. Position the shoulder belt to cross the middle of the shoulder and the center of the chest.

Safety Belt Locking Modes

WARNINGS

image309

After any vehicle crash, the safety belt system at all passenger seating positions must be checked by an

image310

authorized dealer to verify that the automatic locking retractor feature for child seats is still functioning properly. In addition, all safety belts should be checked for proper function.

The belt and retractor must be replaced if the safety belt assembly automatic locking retractor feature

image311

or any other safety belt function is not operating properly when checked by an authorized dealer. Failure to replace the belt and retractor assembly could increase the risk of injury in crashes.

image312

30

image313

Super Duty (), enUSA

image314image315

Safety Belts

image316

All safety restraints in the vehicle are combination lap and shoulder belts. The driver safety belt has the first type of locking mode. The front outboard passenger and rear outboard seat safety belts have both types of locking modes described as follows:

Vehicle Sensitive Mode

This is the normal retractor mode, which allows free shoulder belt length adjustment to your movements and locking in response to vehicle movement. For example, if the driver brakes suddenly or turns a corner sharply, or the vehicle receives an impact of about 5 mph

(8 km/h) or more, the combination safety belts will lock to help reduce forward movement of the driver and passengers.

In addition, the retractor is designed to lock if the webbing is pulled out too quickly. If this occurs, let the belt retract slightly and pull webbing out again in a slow and controlled manner.

How to Use the Automatic Locking Mode

image317

E142591

1.Buckle the combination lap and shoulder belt.

2.Grasp the shoulder portion and pull downward until the entire belt is pulled out.

3.Allow the belt to retract. As the belt retracts, you will hear a clicking sound. This indicates the safety belt is now in the automatic locking mode.

Automatic Locking Mode

In this mode, the shoulder belt is automatically pre-locked. The belt will still retract to remove any slack in the shoulder belt. The automatic locking mode is not available on the driver safety belt.

When to Use the Automatic Locking Mode

Use this mode any time a child safety seat, except a booster, is installed in passenger front or rear seating positions. You should properly restrain children 12 years old and under in a rear seating position whenever possible. See Child Safety (page 15).

31

image318

How to Disengage the Automatic Locking Mode

Unbuckle the combination lap and shoulder belt and allow it to retract completely to disengage the automatic locking mode and activate the vehicle sensitive (emergency) locking mode.

Safety Belt Extension Assembly

WARNING

image319

Do not use extensions to change the fit of the shoulder belt across the torso.

image320image321

If the safety belt is too short when fully extended, you can obtain a safety belt extension assembly from an authorized dealer.

image322

Super Duty (), enUSA

image323image324

Safety Belts

image325

Use only extensions manufactured by the same supplier as the safety belt. Manufacturer identification is located at the end of the webbing on the label. Also, use the safety belt extension only if the safety belt is too short for you when fully extended.

SAFETY BELT HEIGHT ADJUSTMENT

WARNING

image326

Position the safety belt height adjuster so that the belt rests across the middle of your shoulder. Failure

image327

to adjust the safety belt properly could reduce the effectiveness of the safety belt and increase the risk of injury in a crash.

image328

Adjust the height of the shoulder belt so the belt rests across the middle of your shoulder.

To adjust the shoulder belt height:

1.Pull the button and slide the height adjuster up or down.

2.Release the button and pull down on the height adjuster to make sure it is locked in place.

SAFETYBELTWARNINGLAMP AND INDICATOR CHIME

This lamp illuminates and an

image329

audible warning will sound if the driver’s safety belt has not been

fastened when the vehicle’s ignition is turned on.

E145664

32

image330image331

Super Duty (), enUSA

image332image333

Safety Belts

image334

Conditions of operation

image335

If…

Then…

The driver’s safety belt is not buckled

The safety belt warning light illuminates 1-

before the ignition switch is turned to the

2 minutes and the warning chime sounds

on position…

4-8 seconds.

The driver’s safety belt is buckled while the

The safety belt warning light and warning

indicator light is illuminated and the

chime turn off.

warning chime is sounding…

The driver’s safety belt is buckled before

The safety belt warning light and indicator

the ignition switch is turned to the on posi-

chime remain off.

tion…

SAFETY BELT MINDER

Belt-Minder™

This feature supplements the safety belt

warning function. It provides additional

reminders by intermittently sounding a

chime and illuminating the safety belt

warning light when the driver’s seat is

occupied and the safety belt is unbuckled.

33

image336image337

Super Duty (), enUSA

image338image339

Safety Belts

image340image341

If…

Then…

The driver’s safety belt is buckled before

The Belt-Minder feature will not activate.

the ignition switch is turned to the on posi-

tion or less than 1-2 minutes have elapsed

since the ignition switch has been turned

to on…

The driver’s safety belt is not buckled when the vehicle has reached at least 6 mph (9.7 km/h) and 1-2 minutes have elapsed since the ignition switch has been turned to on…

The driver’s safety belt becomes unbuckled for about one minute while the vehicle is traveling at least 6 mph (9.7 km/h) and more than 1-2 minutes have elapsed since the ignition switch has been turned to on…

Deactivating and Activating the Belt-Minder Feature (Driver Only)

WARNING

image342

While the system allows you to deactivate it, this system is designed to improve your chances of being

image343

safely belted and surviving an accident. We recommend you leave the system activated for yourself and others who may use the vehicle. To reduce the risk of injury, do not deactivate or activate the system while driving the vehicle.

image344

Note: If you are using MyKey, you cannot disable the Belt-Minder. Also, if the Belt-Minder has been previously disabled, it will be re-enabled during the use of MyKey. See MyKey™ (page 50).

Read Steps 1 – 4 thoroughly before proceeding with the programming procedure.

The Belt-Minder feature is activated – the safety belt warning light illuminates and the warning chime sounds for six seconds every 25 seconds, repeating for about five minutes or until the safety belts are buckled.

The Belt-Minder feature is activated – the safety belt warning light illuminates and the warning chime sounds for six seconds every 25 seconds, repeating for about five minutes or until the safety belts are buckled.

Deactivate or activate the system by performing the following procedure:

Before following the procedure, make sure that:

The parking brake is set.

The transmission is in park (P).

The ignition is off.

All vehicle doors are closed.

The driver’s safety belt is unbuckled.

1.Turn the ignition on. Do not start the engine.

2.Wait until the safety belt warning light turns off (about one minute). Step 3 must be completed within 30 seconds after the safety belt warning light turns off.

3.Buckle then unbuckle the safety belt three times at a moderate speed, ending with the safety belt in the unbuckled state. After Step 3, the safety belt warning light will turn on.

34

image345image346

Super Duty (), enUSA

image347image348

Safety Belts

image349

4.While the safety belt warning light is on, buckle then unbuckle the safety belt. After Step 4, the safety belt warning light will flash for confirmation.

This will disable the feature if it is currently enabled.

This will enable the feature if it is currently disabled.

CHILD RESTRAINT AND SAFETY BELT MAINTENANCE

Inspect the vehicle safety belts and child safety seat systems periodically to make sure they work properly and are not damaged. Inspect the vehicle and child seat safety belts to make sure there are no nicks, tears or cuts. Replace if necessary. All vehicle safety belt assemblies, including retractors, buckles, front safety belt buckle assemblies, buckle support assemblies (slide bar-if equipped), shoulder belt height adjusters (if equipped), shoulder belt guide on seat back (if equipped), child safety seat LATCH and tether anchors, and attaching hardware, should be inspected after a crash. Read the child restraint manufacturer’s instructions for additional inspection and maintenance information specific to the child restraint.

Ford Motor Company recommends that all safety belt assemblies in use in vehicles involved in a crash be replaced. However, if the crash was minor and an authorized dealer finds that the belts do not show damage and continue to operate properly, they do not need to be replaced. Safety belt assemblies not in use during a crash should also be inspected and replaced if either damage or improper operation is noted.

Properly care for safety belts. See Vehicle Care (page 256).

35

image350image351

Super Duty (), enUSA

image352image353

Supplementary Restraints System

image354

PRINCIPLE OF OPERATION

WARNINGS

image355

Airbags do not inflate slowly or gently, and the risk of injury from a deploying airbag is the greatest close

image356

to the trim covering the airbag module.

All occupants of your vehicle, including the driver, should always properly wear their safety belts, even

image357

when an airbag supplemental restraint system is provided. Failure to properly wear your safety belt could seriously increase the risk of injury or death.

Always transport children 12 years old and under in the back seat and always properly use appropriate

image358

child restraints. Failure to follow this could seriously increase the risk of injury or death.

Never place your arm over the airbag module as a deploying airbag can result in serious arm fractures or

image359

other injuries.

Airbags can kill or injure a child in a child seat. Never place a rear-facing child seat in front of an active airbag.

image360

If you must use a forward-facing child seat in the front seat, move the seat upon which the child seat is installed all the way back.

Do not attempt to service, repair, or modify the airbag supplemental restraint systems or its fuses as you

image361

could be seriously injured or killed. Contact your authorized dealer as soon as possible.

Several airbag system components get hot after inflation. To avoid risk of injury, do not touch them after

image362

inflation.

If the airbag has deployed, the airbag will not function again and must be replaced immediately. If the airbag

image363

is not replaced, the unrepaired area will increase the risk of injury in a crash.

image364

36

image365

The airbags are a supplemental restraint system and are designed to work with the safety belts to help protect the driver and right front passenger from certain upper body injuries. Airbags do not inflate slowly; there is a risk of injury from a deploying airbag.

Note: You will hear a loud bang and see a cloud of harmless powdery residue if an airbag deploys. This is normal.

The airbags inflate and deflate rapidly upon activation. After airbag deployment, it is normal to notice a smoke-like, powdery residue or smell the burnt propellant. This may consist of cornstarch, talcum powder (to lubricate the bag) or sodium compounds (for example, baking soda) that result from the combustion process that inflates the airbag. Small amounts of sodium hydroxide may be present which may irritate the skin and eyes, but none of the residue is toxic.

While the system is designed to help reduce serious injuries, contact with a deploying airbag may also cause abrasions or swelling. Temporary hearing loss is also a possibility as a result of the noise associated with a deploying airbag. Because airbags must inflate rapidly and with considerable force, there is the risk of death or serious injuries such as fractures, facial and eye injuries or internal injuries, particularly to occupants who are not properly restrained or are otherwise out of position at the time of airbag deployment. Thus, it is extremely important that occupants be properly restrained as far away from the airbag module as possible while maintaining vehicle control.

Routine maintenance of the airbags is not required.

image366

Super Duty (), enUSA

image367image368

Supplementary Restraints System

image369

DRIVER AND PASSENGER AIRBAGS

WARNINGS

image370

Never place your arm or any objects over an airbag module. Placing your arm over a deploying airbag can

image371

result in serious arm fractures or other injuries. Objects placed on or over the airbag inflation area may cause those objects to be propelled by the airbag into your face and torso causing serious injury.

Airbags can kill or injure a child in a child seat. Never place a rear-facing child seat in front of an active airbag.

image372

If you must use a forward-facing child seat in the front seat, move the seat upon which the child seat is installed all the way back.

image373image374

E151127

Passenger Airbag On and Off

Switch (If Equipped)

WARNINGS

image375

Even with Advanced Restraints Systems, children 12 and under should be properly restrained in a

image376

rear seating position. Failure to follow this could seriously increase the risk of injury or death.

The front passenger airbag is not designed to offer protection to an occupant in the center seating

image377

position.

An airbag ON and OFF switch may be installed in this vehicle. Before driving, always look at the face of the

image378

switch to be sure the switch is in the proper position in accordance with these instructions and warnings. Failure to put the switch in a proper position can increase the risk of serious injury or death in a crash.

image379image380

E162720

The driver and front passenger airbags will deploy during significant frontal and near frontal crashes.

The driver and passenger front airbag system consists of:

driver and passenger airbag modules.

· crash sensors and monitoring system with readiness indicator. See Crash Sensors and Airbag

image381

Indicator (page 44).

37

image382

High-series vehicles (if equipped)

The front passenger airbag on and off switch has indicators that will illuminate, indicating that the front passenger frontal airbag is either on or off. The indicator lamp is located by the radio.

Note: The passenger airbag status indicator OFF and ON lamps will illuminate for a short period of time when the ignition is first turned on to confirm it is functional.

image383

Super Duty (), enUSA

image384image385

Supplementary Restraints System

image386image387

Switch position

Passenger airbag status

Passenger airbag

indicator

Off

OFF: Lit

Disabled

ON: Unlit

On

OFF: Unlit

Enabled

ON: Lit

E162721

image388

Low-series vehicles (if equipped)

The front passenger airbag on and off switch has an indicator that will illuminate and stay lit to remind you that the front passenger frontal airbag is off. The indicator lamp is located by the radio.

Note: The indicator lamp will illuminate for a short period of time when the ignition is first turned on to confirm it is functional.

Turning the Passenger Airbag Off

WARNINGS

image389

If the light fails to illuminate when the passenger air bag switch is off and the ignition is on, have the

image390

passenger air bag switch serviced at your authorized dealer immediately.

In order to avoid inadvertent activation of the switch, always remove the ignition key from the

image391

passenger air bag on and off switch.

WARNINGS

image392

An infant in a rear-facing seat faces a high risk of serious or fatal injuries from a deploying passenger airbag.

image393

Rear facing infant seats should never be placed in the front seats, unless the passenger airbag is turned off.

image394image395

E162722

1.Insert the ignition key, turn the switch to OFF and hold in OFF while removing the key.

2.When the ignition is turned on, the pass airbag off light illuminates briefly, momentarily shuts off and then turns back on. This indicates that the passenger airbag is deactivated.

Turning the Passenger Airbag Back On WARNINGS

image396

The safety belts for the driver and right front passenger seating positions have been specifically

image397

designed to function together with the airbags in certain types of crashes. When you turn off your airbag, you not only lose

38

image398image399

Super Duty (), enUSA

image400image401

Supplementary Restraints System

image402

WARNINGS

image403

the protection of the airbag, you also may reduce the effectiveness of your safety belt system, which was designed to work with the airbag. If you are not a person who meets the requirements stated in the National Highway Traffic Safety Administration or Transport Canada deactivation criteria turning off the airbag can increase the risk of serious injury or death in a crash.

If your vehicle has rear seats, always transport children who are 12 and younger in the rear seat. Always use

image404

safety belts and child restraints properly. Do not place a child in a rear facing infant seat in the front seat unless your vehicle is equipped with an airbag on and off switch and the passenger airbag is turned off. This is because the back of the infant seat is too close to the inflating airbag and the risk of a fatal injury to the infant when the airbag inflates is substantial.

If the pass airbag off light is illuminated when the passenger airbag switch is on and the ignition

image405

is on, have the passenger airbag switch serviced at your authorized dealer immediately.

image406

The passenger airbag remains off until you turn it back on.

image407

2.The pass airbag off light will briefly illuminate when the ignition is turned to on. This indicates that the passenger airbag is operational.

The passenger side airbag should always be on (the pass airbag off light should not be illuminated) unless the passenger is a person who meets the requirements stated either in Category 1, 2 or 3 of the National Highway Traffic Safety Administration or Transport Canada deactivation criteria which follows.

The vast majority of drivers and passengers are much safer with an airbag than without. To do their job and reduce the risk of life threatening injuries, airbags must open with great force, and this force can pose a potentially deadly risk in some situations, particularly when a front seat occupant is not properly buckled up. The most effective way to reduce the risk of unnecessary airbag injuries without reducing the overall safety of the vehicle is to make sure all occupants are properly restrained in the vehicle, especially in the front seat. This provides the protection of safety belts and permits the airbags to provide the additional protection they were designed to provide. If you choose to deactivate your airbag, you are losing the very significant risk reducing benefits of the airbag and you are also reducing the effectiveness of the safety belts, because safety belts in modern vehicles are designed to work as a safety system with the airbags.

E162723

1.Insert the ignition key and turn the switch to ON.

39

image408image409

Super Duty (), enUSA

image410image411

Supplementary Restraints System

image412

National Highway Traffic Safety Administration Deactivation Criteria (Excluding Canada)

WARNING

image413

This vehicle has special energy management safety belts for the driver and right front passenger.

image414

These particular belts are specifically designed to work with airbags to help reduce the risk of injury in a crash. The energy management safety belt is designed to give or release additional belt webbing in some accidents to reduce concentration of force on an occupant’s chest and reduce the risk of certain bone fractures and injuries to underlying organs. In a crash, if the airbag is turned off, this energy management safety belt might permit the person wearing the belt to move forward enough to incur a serious or fatal injury. The more severe the crash, and the heavier the occupant, the greater the risk is. Be sure the airbag is turned on for any person who does not qualify under the National Highway Traffic Safety Administration deactivation criteria.

image415

1.Infant. An infant (less than 1 year old) must ride in the front seat because:

the vehicle has no rear seat;

although children ages 1 to 12 ride in the rear seat(s) whenever possible, children ages 1 to 12 sometimes must ride in the front because no space is available in the rear seat(s) of the vehicle; or

the child has a medical condition which, according to the child’s physician, makes it necessary for the child to ride in the front seat so that the driver can constantly monitor the child’s condition.

3.Medical condition. A passenger has a medical condition which, according to his or her physician:
causes the passenger airbag to pose a special risk for the passenger;

makes the potential harm from the passenger airbag in a crash greater than the potential harm from turning off the airbag and allowing the passenger, even if belted, to hit the dashboard or windshield in a crash.
the vehicle has no rear seat;

the vehicle has a rear seat too small to accommodate a rear-facing infant seat; or

the infant has a medical condition which, according to the infant’s physician, makes it necessary for the infant to ride in the front so that the driver can constantly monitor the child’s condition.

2.Child age 1 to 12. A child age 1 to 12 must ride in the front seat because:

40

image416image417

Super Duty (), enUSA

image418image419

Supplementary Restraints System

image420

Transport Canada Deactivation Criteria (Canada Only)

WARNING

image421

This vehicle has special energy management safety belts for the driver and right front passenger.

image422

These particular belts are specifically designed to work with airbags to help reduce the risk of injury in a crash. The energy management safety belt is designed to give or release additional belt webbing in some accidents to reduce concentration of force on an occupant’s chest and reduce the risk of certain bone fractures and injuries to underlying organs. In a crash, if the airbag is turned off, this energy management safety belt might permit the person wearing the belt to move forward enough to incur a serious or fatal injury. The more severe the crash, and the heavier the occupant, the greater the risk is. Be sure the airbag is turned on for any person who does not qualify under the National Highway Traffic Safety Administration deactivation criteria.

image423

1.Infant: An infant (less than 1 year old) must ride in the front seat because:
my vehicle has no rear seat;

the rear seat in my vehicle cannot accommodate a rear-facing infant seat;

the infant has a medical condition which, according to the infant’s physician, makes it necessary for the infant to ride in the front seat so that the driver can monitor the infant’s condition.

2.Child age 12 or under: A child age 12 or under must ride in the front seat because:

41

image424

my vehicle has no rear seat;

although children age 12 and under ride in the rear seat whenever possible, children age 12 and under have no option but to sometimes ride in the front seat because rear seat space is insufficient;

the child has a medical condition that, according to the child’s physician, makes it necessary for the child to ride in the front seat so that the driver can monitor the child’s condition.

3.Medical condition: A passenger has a medical condition that, according to his or her physician:
poses a special risk for the passenger if the airbag deploys; and

makes the potential harm from the passenger airbag deployment greater than the potential harm from turning off the airbag and experiencing a crash without the protection offered by the airbag

Proper Driver and Front Passenger Seating Adjustment

WARNING

image425

The National Highway Traffic Safety Administration recommends a minimum distance of at least 10

image426

inches (25 centimeters) between an occupant’s chest and the driver airbag module.

image427

To properly position yourself away from the airbag:

Move your seat to the rear as far as you can while still reaching the pedals comfortably.

Recline the seat slightly (one or two degrees) from the upright position.

image428

Super Duty (), enUSA

image429image430

Supplementary Restraints System

image431

After all occupants have adjusted their seats and put on safety belts, it is very important that they continue to sit properly. Properly seated occupants sit upright, lean against the seat back, and center themselves on the seat cushion, with their feet comfortably extended on the floor. Sitting improperly can increase the chance of injury in a crash event. For example, if an occupant slouches, lies down, turns sideways, sits forward, leans forward or sideways, or puts one or both feet up, the chance of injury during a crash is greatly increased.

Children and Airbags

WARNING

image432

Airbags can kill or injure a child in a child seat. Never place a rear-facing child seat in front of an active airbag.

image433

If you must use a forward-facing child seat in the front seat, move the seat upon which the child seat is installed all the way back.

image434

E142846

Children must always be properly restrained. Accident statistics suggest that children are safer when properly restrained in the rear seating positions than in the front seating position. Failure to follow these instructions may increase the risk of injury in a crash.

If two adults and a child occupy a Regular Cab, properly restrain the child in the center front unless doing so would interfere with driving your vehicle. This provides lap and shoulder belt protection for all occupants, and airbag protection for the adults. A child or infant properly restrained in the center front seat should not incur risk of serious injury from the airbags.

SIDE AIRBAGS

WARNINGS

image435

Do not place objects or mount equipment on or near the airbag cover, on the side of the seatbacks

image436

(of the front seats), or in front seat areas that may come into contact with a deploying airbag. Failure to follow these instructions may increase the risk of personal injury in the event of a crash.

Do not use accessory seat covers. The use of accessory seat covers may prevent the deployment of the

image437

side airbags and increase the risk of injury in an accident.

Do not lean your head on the door. The side airbag could injure you as it deploys from the side of the

image438

seatback.

Do not attempt to service, repair, or modify the airbag, its fuses or the seat cover on a seat containing an

image439

airbag as you could be seriously injured or killed. Contact your authorized dealer as soon as possible.

If the side airbag has deployed, the airbag will not function again. The side airbag system (including the

image440

seat) must be inspected and serviced by an authorized dealer. If the airbag is not replaced, the unrepaired area will increase the risk of injury in a crash.

image441

42

image442image443

Super Duty (), enUSA

image444image445

Supplementary Restraints System

image446

The side airbags are located on the outboard side of the seatbacks of the front seats. In certain sideways crashes, the airbag on the side affected by the crash will be inflated. The airbag was designed to inflate between the door panel and occupant to further enhance the protection provided occupants in side impact crashes.

image447

E152533

The system consists of the following:

A label or embossed side panel indicating that side airbags are found on your vehicle.

Side airbags located inside the seatback of the driver and front passenger seats.

·Crash sensors and monitoring system with readiness indicator. See Crash Sensors and Airbag

image448

Indicator (page 44).

The design and development of the side airbag system included recommended testing procedures that were developed by a group of automotive safety experts known as the Side Airbag Technical Working Group. These recommended testing procedures help reduce the risk of injuries related to the deployment of side airbags.

SAFETY CANOPY™

WARNINGS

image449

Do not place objects or mount equipment on or near the headliner at the siderail that may come into

image450

contact with a deploying curtain airbag. Failure to follow these instructions may increase the risk of personal injury in the event of a crash.

Do not lean your head on the door. The curtain airbag could injure you as it deploys from the headliner.

image451

Do not attempt to service, repair, or modify the curtain airbags, its fuses, the A, B, or C pillar trim, or the

image452

headliner on a vehicle containing curtain airbags as you could be seriously injured or killed. Contact your authorized dealer as soon as possible.

All occupants of your vehicle including the driver should always wear their safety belts even when an

image453

airbag supplemental restraint system and curtain airbag is provided. Failure to properly wear your safety belt could seriously increase the risk of injury or death.

To reduce risk of injury, do not obstruct or place objects in the deployment path of the curtain

image454

airbag.

If the curtain airbags have deployed, the curtain airbags will not function again. The curtain airbags (including

image455

the A, B and C pillar trim and headliner) must be inspected and serviced by an authorized dealer. If the curtain airbag is not replaced, the unrepaired area will increase the risk of injury in a crash.

image456

43

image457image458

Super Duty (), enUSA

image459image460

Supplementary Restraints System

image461

The Safety Canopy will deploy during significant side crashes or when a certain likelihood of a rollover event is detected by the rollover sensor. The Safety Canopy is mounted to the roof side-rail sheet metal, behind the headliner, above each row of seats. In certain sideways crashes or rollover events, the Safety Canopy will be activated, regardless of which seats are occupied. The Safety Canopy is designed to inflate between the side window area and occupants to further enhance protection provided in side impact crashes and rollover events.

image462

Children 12 years old and under should always be properly restrained in the rear seats. The Safety Canopy will not interfere with children restrained using a properly installed child or booster seat because it is designed to inflate downward from the headliner above the doors along the side window opening.

The design and development of the Safety Canopy included recommended testing procedures that were developed by a group of automotive safety experts known as the Side Airbag Technical Working Group. These recommended testing procedures help reduce the risk of injuries related to the deployment of side airbags (including the Safety Canopy).

E75004

The system consists of the following:

Safety canopy curtain airbags located above the trim panels over the front and rear side windows identified by a label or wording on the headliner or roof-pillar trim.

A flexible headliner which opens above the side doors to allow air curtain deployment

The crash sensors and monitoring system have a readiness indicator. See

Crash Sensors and Airbag Indicator (page 44).

image463

44

image464

CRASH SENSORS AND AIRBAG INDICATOR

WARNING

image465

Modifying or adding equipment to the front end of the vehicle (including frame, bumper, front end body

image466

structure and tow hooks) may affect the performance of the airbag system, increasing the risk of injury. Do not modify the front end of the vehicle.

image467

Your vehicle has a collection of crash and occupant sensors which provide information to the restraints control module which deploys (activates) the front safety belt pretensioners, driver airbag, passenger airbag, seat mounted side airbags, and the Safety Canopy®. Based on the type of crash (frontal impact, side impact or rollover), the restraints control module will deploy the appropriate safety devices.

image468

Super Duty (), enUSA

image469image470

Supplementary Restraints System

image471

The restraints control module also monitors the readiness of the above safety devices plus the crash and occupant sensors. The readiness of the safety system is indicated by a warning indicator light in the instrument cluster or by a backup tone if the warning light is not working. See Instrument Cluster (page 75). Routine maintenance of the airbag is not required.

A difficulty with the system is indicated by one or more of the following:

The readiness light will not illuminate immediately after the ignition is turned on.

image472

The readiness light will either flash or stay lit.

A series of five beeps will be heard. The tone pattern will repeat periodically until the problem, the light or both are repaired.

If any of these things happen, even intermittently, have the supplemental restraint system serviced at an authorized dealer immediately. Unless serviced, the system may not function properly in the event of a crash.

The fact that the safety belt pretensioners or front airbags did not activate for both front seat occupants in a crash does not mean that something is wrong with the system. Rather, it means the restraints control module determined the accident conditions (crash severity, belt usage) were not appropriate to activate these safety devices.

The design of the front airbags is to activate only in frontal and near-frontal crashes (not rollovers, side impacts or rear impacts) unless the crash causes sufficient frontal deceleration.

The design of the safety belt pretensioners is to activate in frontal, near-frontal and side crashes, and in rollovers.

The design of the side airbags is to inflate in certain side impact crashes. Side airbags may activate in other types of crashes if the vehicle experiences sufficient sideways motion or deformation.

The design of the Safety Canopy is to inflate in certain side impact crashes or rollover events. The Safety Canopy may activate in other types of crashes if the vehicle experiences sufficient sideways motion or deformation, or a certain likelihood of rollover.

AIRBAG DISPOSAL

Contact your authorized dealer as soon as

possible. Airbags must be disposed of by

qualified personnel.

45

image473image474

Super Duty (), enUSA

image475image476

Keys and Remote Controls

image477

GENERAL INFORMATION ON

REMOTE CONTROL

RADIO FREQUENCIES

Integrated Keyhead Transmitters

This device complies with Part 15 of the

(If Equipped)

FCC Rules and with Industry Canada

license-exempt RSS standard(s).

Operation is subject to the following two

conditions: (1) This device may not cause

harmful interference, and (2) This device

must accept any interference received,

including interference that may cause

undesired operation.

image478

Note: Changes or modifications not expressively approved by the party responsible for compliance could void the user’s authority to operate the equipment. The term IC before the radio certification number only signifies that Industry Canada technical specifications were met.

The typical operating range for your transmitter is approximately 33 feet (10 meters). Vehicles with the remote start feature will have a greater range. One of the following could cause a decrease in operating range:

E163046

Use the key blade to start your vehicle and unlock or lock the driver door from outside your vehicle. The transmitter portion functions as the remote control.

image479

weather conditions

nearby radio towers

structures around the vehicle

other vehicles parked next to your vehicle

The radio frequency used by your remote control can also be used by other short distance radio transmissions, for example amateur radios, medical equipment, wireless headphones, remote controls and alarm systems. If the frequencies are jammed, you will not be able to use your remote control. You can lock and unlock the doors with the key.

Note: Make sure to lock your vehicle before leaving it unattended.

Note: If you are in range, the remote control will operate if you press any button unintentionally.

46

image480

E163047

Note: Your vehicle’s keys came with a security label that provides important vehicle key cut information. Keep the label in a safe place for future reference.

Replacing the Battery

Note: Refer to local regulations when disposing of transmitter batteries.

Note: Do not wipe off any grease on the battery terminals or on the back surface of the circuit board.

Note: Replacing the battery will not delete the transmitter from the vehicle. The transmitter should operate normally.

The remote control uses one coin-type three-volt lithium battery CR2032 or equivalent.

image481

Super Duty (), enUSA

image482image483

Keys and Remote Controls

image484

Integrated Keyhead Transmitter  Programming to the Transmitter

1.

With the ignition on, move the memory

1

features to the desired positions using

the associated controls.

2

1

image485image486

3

E163048

1.Twist a thin coin in the slot of the transmitter near the key ring to remove the battery cover.

2.Carefully peel up the rubber gasket from the transmitter. It may come off with the battery cover.

3.Remove the old battery

4.Insert the new battery. Refer to the instructions inside the transmitter for the correct orientation of the battery. Press the battery down to make sure it is fully in the housing.

5.Reinstall the rubber gasket.

6.Snap the battery cover back onto the transmitter.

Memory Feature (If Equipped)

You can use the remote control to recall memory settings for the driver seat, power mirrors and power foot pedals.

Press the unlock button on the remote control to recall the memory positions. If you enable the easy-entry and exit feature, the seat will move to the easy-entry position. The seat will move to the driver memory position when you put the key in the ignition.

image487

47

2

E162734

2.Press and hold memory button 1 on the driver door. A tone will sound after about two seconds. Continue to hold until you hear a second tone.

3.Press the lock button on the remote control within three seconds. A single tone sounds.

Repeat this procedure with button 2 and a second remote control if desired.

Deactivating from the Transmitter

1.Press and hold the desired memory button for five seconds. A tone will sound after about two seconds.

Continue to hold until you hear a second tone.

2.Press the unlock button on the remote control within three seconds.

Repeat this procedure for each additional transmitter if desired.

Car Finder

Press the button twice within three seconds. The horn will

image488

E138623 sound and the turn signals will flash. We recommend you use this method to locate your vehicle, rather than using the panic alarm.

image489

Super Duty (), enUSA

image490image491

Keys and Remote Controls

image492

Sounding a Panic Alarm

Note: The panic alarm will only operate when the ignition is off.

Press the button to activate the

image493

alarm. Press the button again or

E138624  turn the ignition on to deactivate

it.

Remote Start (If Equipped)

WARNING

image494

To avoid exhaust fumes, do not use remote start if your vehicle is parked indoors or areas that are not well

image495

ventilated.

image496

the vehicle battery voltage is too low

the service engine soon indicator is on.

Remote Starting the Vehicle

Note: You must press each button within three seconds of each other. Your vehicle will not remote start and the horn will not sound if you do not follow this sequence.

image497

E138626

Note: Do not use remote start if your vehicle is low on fuel.

The remote start button is on the transmitter.

image498

E138625

This feature allows you to start your vehicle from outside the vehicle. The transmitter has an extended operating range.

Vehicles with automatic climate control can be set to operate when you remote start the vehicle. See Climate Control (page 103). A manual climate control system will run at the setting it was set to when you switch the vehicle off.

Many states and provinces have restrictions for the use of remote start. Check your local and state or provincial laws for specific requirements regarding remote start systems.

The remote start system will not work if:

the ignition is on

the alarm system is triggered

you disable the feature

the hood is open

the transmission is not in P

48

image499

The label on your transmitter details the starting procedure.

To remote start your vehicle:

1.Press the lock button to lock all the doors.

2.Press the remote start button twice. The exterior lamps will flash twice.

The horn will sound if the system fails to start.

Note: If you remote start your vehicle with an integrated keyhead transmitter, you must switch the ignition on before driving your vehicle. If you remote start your vehicle with an intelligent access transmitter, you must press the START/STOP button on the instrument panel once while applying the brake pedal before driving your vehicle.

The power windows will not work during the remote start and the radio will not turn on automatically.

The parking lamps will remain on and the vehicle will run for 5, 10, or 15 minutes, depending on the setting.

image500

Super Duty (), enUSA

image501image502

Keys and Remote Controls

image503

Extending the Vehicle Run Time

Repeat Steps 1 and 2 with the vehicle still running to extend the run time for another remote start duration. If the duration is set to last 10 minutes, the duration will extend by another 10 minutes. For example, if the vehicle had been running from the first remote start for five minutes, the vehicle will continue to run now for a total of 20 minutes.

Wait at least five seconds before remote starting after a vehicle shutdown.

Turning the Vehicle Off After Remote Starting

Press the button once. The

image504

parking lamps will turn off.

E138625

You may have to be closer to the vehicle than when starting due to ground reflection and the added noise of the running vehicle.

You can disable or enable the remote start system through the information display. See General Information (page 81).

REPLACING A LOST KEY OR REMOTE CONTROL

Replacement keys or remote controls can be purchased from an authorized dealer. Authorized dealers can program remote controls for your vehicle. See Passive Anti-Theft System (page 58).

To re-program the passive anti-theft

system see an authorized dealer.

49

image505image506

Super Duty (), enUSA

image507image508

MyKey™

image509

PRINCIPLE OF OPERATION

MyKey allows you to program keys with restricted driving modes to promote good driving habits. All but one of the keys programmed to the vehicle can be activated with these restricted modes.

Any keys that have not been programmed are referred to as administrator keys or admin keys. They can be used to:

create a MyKey

program configurable MyKey settings

clear all MyKey features.

Configurable Settings

With an admin key, you can configure certain MyKey settings when you first create a MyKey and before you recycle the key or restart the vehicle. You can also change the settings afterward with an admin key:

A vehicle speed limit can be set. Warnings will be shown in the display followed by an audible tone when your vehicle reaches the set speed. You cannot override the set speed by fully depressing the accelerator pedal or by setting cruise control.

When you have programmed a MyKey, you can access the following information using the information display:

How many admin keys and MyKeys are programmed to your vehicle.

The total distance your vehicle has traveled using a MyKey.

Note: All MyKeys are programmed to the same settings. You cannot program them individually.

Non-configurable Settings

The following settings cannot be changed by an admin key user:

Belt-Minder. You cannot disable this feature. The audio system will mute when the front seat occupants’ safety belts are not fastened. Note: If your vehicle is equipped with AM/FM radio only, then the radio will not mute.

Early low fuel. The low fuel warning is activated earlier, giving the MyKey user more time to refuel.

Driver assist features, if equipped on your vehicle, are forced on: parking aid, blind spot information system (BLIS) with cross traffic alert, lane departure warning and forward collision warning system.

50

image510

Vehicle speed minders of 45, 55 or 65 mph (75, 90 or 105 km/h). Once you select a speed, it will be shown in the display, followed by an audible tone when the preselected vehicle speed is exceeded.

Audio system maximum volume of 45%. A message will be shown in the display when you attempt to exceed the limited volume. Also, the speed-sensitive or compensated automatic volume control will be disabled. Note: If your vehicle is equipped with AM/FM radio only, then the radio volume will not be limited.

Always on setting. When this is selected, you will not be able to turn off AdvanceTrac (if your vehicle is equipped with this feature).

CREATING A MYKEY

Use the information display to create a MyKey. There are two types of information displays, and their controls and messaging vary. To determine which type of display you have, you will need to reference another chapter. See General Information (page 81).

If You Have a Type 1 Information Display:

image511

Super Duty (), enUSA

image512image513

MyKey™

image514

1.Insert the key you want to program into the ignition.

2.Switch the ignition on.

3.Access the main menu on the information display controls. Press SETUP using the information display buttons until PRESS RESET TO CREATE MYKEY is displayed.

4.Press and release the RESET button. You will see HOLD RESET TO CONFIRM MYKEY in the display.

5.Press and hold the RESET button for two seconds until you see the message MARK THIS AS RESTRICTED in the display. Wait until you see KEY RESTRICTED AT NEXT START in the display.

If You Have a Type 2 Information Display:

1.Insert the key you want to program into the ignition.

2.Switch the ignition on.

3.Access the main menu on the information display controls, and select SETTINGS, then MYKEY by pressing OK or the > button.

4.Press OK or the > button to select

CREATE A MYKEY.

5.When prompted, hold the OK button until you see KEY RESTRICTED AT NEXT START in the display. The key will be restricted at the next start.

MyKey is successfully created. Make sure you label it so you can distinguish it from the admin keys.

You can also program configurable settings for the key(s). Refer to

Programming/Changing Configurable Settings.

51

image515

Programming/Changing Configurable Settings

Use the information display to program or change your configurable MyKey settings. There are two types of information displays, and their controls and messaging vary. To determine which type of display you have, you will need to reference another chapter. See General Information (page 81).

If You Have a Type 1 Information Display:

1.Switch the ignition on using an admin key.

2.Access the main menu on the information display controls, and press SETUP until RESET FOR MYKEY SETTINGS displays.

3.Press and release the RESET button to display MyKey setup menus.

4.Press the SETUP button to enter your choice. Once you make a selection, the next configurable setting will be displayed.

5.Repeat Steps 3 and 4 until you are done changing the configurable settings.

If You Have a Type 2 Information Display:

1.Switch the ignition on using an admin key.

2.Access the main menu on the information display controls, and select SETTINGS, then MYKEY by pressing OK or the > button.

3.Use the arrow buttons to get to a configurable feature.

4.Press OK or > to make a selection.

image516

Super Duty (), enUSA

image517image518

MyKey™

image519

Note: You can clear or change your MyKey settings at any time during the same key cycle as you created the MyKey. Once you have switched the engine off, however, you will need an admin key to change or clear your MyKey settings.

CLEARING ALL MYKEYS

You can clear all MyKeys within the same key cycle as you created the MyKey. If you switch your ignition off, however, you will need to use an admin key to clear your MyKeys.

Note: When you clear your MyKeys, you remove all restrictions and return all MyKeys to their original admin key status at once.

To clear all MyKeys of all MyKey settings, use the information display. There are two types of information displays, and their controls and messaging vary. To determine which type of display you have, you will need to reference another chapter. See General Information (page 81).

If You Have a Type 1 Information Display:

1.Press SETUP until PRESS RESET TO CLEAR MYKEY displays.

2.Press and release the RESET button. The display will show HOLD RESET TO CONFIRM CLEAR.

3.Press and hold the RESET button for two seconds until ALL MYKEYS CLEARED displays.

If You Have a Type 2 Information Display:

1.Access the main menu and select SETTINGS, then MYKEY.

2.Scroll to CLEAR ALL and press the OK button.

52

image520

3.Hold the OK button until ALL MYKEYS CLEARED displays.

CHECKING MYKEY SYSTEM STATUS

You can find information about your programmed MyKeys by using the information display.

MYKEY DISTANCE

Tracks the distance when drivers use a MyKey. The only way to delete the accumulated distance is by using an admin key to clear your MyKey. If the distance does not accumulate as expected, then the intended user is not using the MyKey, or an admin key user recently cleared and then recreated a MyKey.

NUMBER OF MYKEY(S)

Indicates the number of MyKeys programmed to your vehicle. Use this feature to detect how many MyKeys you have for your vehicle and determine when a MyKey has been deleted.

NUMBER OF ADMIN KEY(S)

Indicates how many admin keys are programmed to your vehicle. Use this feature to determine how many unrestricted keys you have for your vehicle, and detect if an additional MyKey has been programmed.

USING MYKEY WITH REMOTE START SYSTEMS

MyKey is not compatible with non Ford-approved, aftermarket remote start systems. If you choose to install a remote start system, see an authorized dealer for a Ford-approved remote start system.

image521

Super Duty (), enUSA

image522image523

MyKey™

image524

MYKEY TROUBLESHOOTING

image525

Condition  image526 Potential causes

I cannot create a MyKey.

·The key used to start the vehicle does not have admin privileges.

·The key used to start the vehicle is the only admin key. There always has to be at least one admin key.

·SecuriLock passive anti-theft system is disabled or in unlimited mode.

I cannot program the configurable settings.

I cannot clear the MyKeys.

·The key in the ignition does not have admin privileges.

·There are no keys programmed to the vehicle. See Creating a MyKey (page 50).

·The key used to start the vehicle does not have admin privileges.

·No MyKeys are created. See Creating a MyKey (page 50).

I lost the only admin key.

I lost a key.

MyKey distances do not accumulate.

·Purchase a new key from your authorized dealer.

·Program a spare key. See Passive Anti-Theft System (page 58).

·The MyKey user is not using the MyKey.

·An admin key holder cleared the MyKeys and created new MyKeys.

·The key system has been reset.

53

image527image528

Super Duty (), enUSA

image529image530

Locks

image531

LOCKING AND UNLOCKING

You can use the power door lock control or the remote control to lock and unlock your vehicle.

Power Door Locks (If Equipped)

The power door lock control is on the driver and front passenger door panels.

image532

A  B

E163049

Locking the Doors

Press the button to lock all the doors. The turn signals will

image533

E138623  illuminate.

Press the button again within three seconds to confirm that all the doors are closed. The doors will lock again, the horn will sound and the turn signals will illuminate if all the doors are closed.

Mislock

If any door is open or if the hood is open on vehicles with an anti-theft alarm or remote start, the horn will sound twice and the lamps will not flash.

Smart Unlocks (If Equipped)

AUnlock

B Lock

Remote Control (If Equipped)

You can use the remote control at any time your vehicle is not running.

Unlocking the Doors (Two-Stage Unlock)

Press the button to unlock the driver door.

image534

E138629

Press the button again within three seconds to unlock all doors. The turn signals will flash.

Press and hold both the lock and unlock buttons on the remote control for four seconds to disable or enable two-stage unlocking. Disabling two-stage unlocking allows all vehicle doors to unlock with one press of the button. The turn signals will flash twice to indicate a change to the unlocking mode. The unlocking mode applies to the remote control and keyless entry keypad.

54

image535

This feature helps to prevent you from locking yourself out of your vehicle if your key is still in the ignition.

When you open the driver door and lock your vehicle with the power door lock control, all the doors will lock then unlock if your key is still in the ignition.

Your can still lock your vehicle with the key in the ignition by:

using the manual lock on the door

locking the driver door with a key

using the keyless entry keypad

using the lock button on the remote control

Autolock and Autounlock (If Equipped)

The autolock feature will lock all the doors when:

all doors are closed, and

the ignition is on, and

you shift into any gear putting your vehicle in motion, and

your vehicle attains a speed greater than 12 mph (20 km/h).

image536

Super Duty (), enUSA

image537image538

Locks

image539

The autolock feature will unlock all the doors when:

autolock has locked the doors

you stop the vehicle and switch the ignition off or to accessory mode, and

you open the driver door within 10 minutes.

Note: The doors will not autounlock if you have electronically locked them before opening the driver door.

Enabling or Disabling

You can enable or disable these features in the information display or your authorized dealer can do it for you. See General Information (page 81).

Note: You can enable or disable the autolock and autounlock features independently of each other.

Battery Saver

The battery saver turns off the interior lamps 30 minutes after you switch the ignition off if a door is open and the dome lamp switch is on. It turns off the interior lamps after 10 minutes if the dome lamp switch is off.

KEYLESS ENTRY (IF EQUIPPED)

SECURICODE™ KEYLESS ENTRY KEYPAD

The keypad is located near the driver window.

Note: If you enter your entry code too fast on the keypad, the unlock function may not work. Re-enter your entry code more slowly.

Illuminated Entry

image540

The interior lamps and select exterior lamps will illuminate when you unlock the doors with the remote entry system.

The illuminated entry system will turn off

the lights if:

E163050

the ignition is on

you press the remote control lock button, or

after 25 seconds of illumination.

The dome lamp will not turn on if the control is set to the off position.

The lights will not turn off if:

you turn them on with the dimmer control, or

any door is open.

image541

You can use the keypad to lock or unlock the doors without using a key.

You can operate the keypad with the factory-set 5-digit entry code. The code is located on the owner’s wallet card in the glove box and is available from an authorized dealer. You can also create up to five of your own 5-digit personal entry codes.

Programming a Personal Entry Code

To create your own personal entry code:

1.Enter the factory-set code.

2.Press 1·2 on the keypad within five seconds.

55

image542

Super Duty (), enUSA

image543image544

Locks

image545

3.Enter your personal 5-digit code. You must enter each number within five seconds of each other.

4.Press 1·2 on the keypad to save personal code 1.

The doors will lock then unlock to confirm that programming was successful.

To program additional personal entry codes, repeat Steps 1-3, then for Step 4:

press 3·4 to save personal code 2

press 5·6 to save personal code 3

press 7·8 to save personal code 4

press 9·0 to save personal code 5.

You may also program a personal entry code through the MyFord Touch system.

Tips:

Do not set a code that uses five of the same number.

Do not use five numbers in sequential order.

The factory-set code will work even if you have set your own personal code.

Recalling Memory Positions (If Equipped)

The programmed entry codes will recall driver memory positions as follows:

Entry code 1 will recall driver 1 memory positions.

Entry code 2 will recall driver 2 memory positions.

Note: Personal entry codes 3, 4 and 5 will not recall memory positions.

Erasing a Personal Code

1.Enter the factory-set 5-digit code.

2.Press and release 1·2 on the keypad within five seconds.

3.Press and hold 1·2 for two seconds. You must do this within five seconds of completing Step 2.

All personal codes will erase and only the factory-set 5-digit code will work.

Anti-Scan Feature

The keypad will go into an anti-scan mode if you enter the wrong code seven times (35 consecutive button presses). This mode disables the keypad for one minute and the keypad lamp will flash.

The anti-scan feature will turn off after:

one minute of keypad inactivity

pressing the unlock button on the remote control

switching the ignition on.

Unlocking and Locking the Doors To Unlock the Driver Door

Enter the factory-set 5-digit code or your personal code. You must press each number within five seconds of each other. The interior lamps will illuminate.

Note: All doors will unlock if you disable the two-stage unlocking mode. See Locking and Unlocking (page 54).

To Unlock All Doors

Enter the factory-set code or your personal code, then press 3·4 within five seconds.

To Lock All Doors

Press and hold 7·8 and 9·0 at the same time (with the driver door closed). You do not need to enter the keypad code first.

Displaying the Factory Set Code

Note: You will need to have two programmed passive anti-theft keys for this procedure.

To display the factory-set code in the information display:

1.Insert a key into the ignition and switch the ignition on for a few seconds.

56

image546image547

Super Duty (), enUSA

image548image549

Locks

image550

2.Switch the ignition off and remove the key.

3.Insert the second key into the ignition and switch the ignition on.

The factory-set code will display for a few seconds.

Note: The code may not display until after any other warning messages first display.

57

image551image552

Super Duty (), enUSA

image553image554

Security

image555

PASSIVE ANTI-THEFT

SYSTEM (IF EQUIPPED)

Note: The system is not compatible with non-Ford aftermarket remote start systems. Use of these systems may result in vehicle starting problems and a loss of security protection.

Note: Metallic objects, electronic devices or a second coded key on the same key chain may cause vehicle starting problems if they are too close to the key when starting the engine. Prevent these objects from touching the coded key while starting the engine. Switch the ignition off, move all objects on the key chain away from the coded key and restart the engine if a problem occurs.

Note: Do not leave a duplicate coded key in the vehicle. Always take your keys and lock all doors when leaving the vehicle.

SecuriLock™

The system is an engine immobilization system. It helps prevent the engine from starting unless you use a coded key programmed to your vehicle. Using the wrong key may prevent the engine from starting. A message may appear in the information display.

If you are unable to start the engine with a correctly coded key, the system has malfunctioned. A message may appear in the information display.

Replacement Keys

Note: Your vehicle may have two integrated keyhead transmitters.

The integrated keyhead transmitter functions as a programmed ignition key. It operates all the locks, starts the vehicle and acts as a remote control.

If your programmed transmitters or standard SecuriLock coded keys are lost or stolen and you do not have an extra coded key, you will need to have your vehicle towed to an authorized dealer. You need to erase the key codes from your vehicle and program new coded keys.

Store an extra programmed key away from your vehicle in a safe place to help prevent any inconveniences. See an authorized dealer to purchase additional spare or replacement keys.

Programming a Spare Key

Note: You can program a maximum of eight coded keys to your vehicle. Only four of these can be integrated keyhead transmitters.

You can program your own integrated keyhead transmitter or standard SecuriLock coded keys to your vehicle. This procedure will program both the engine immobilizer keycode and the remote entry portion of the remote control to your vehicle.

Only use integrated keyhead transmitters or standard SecuriLock keys.

Automatic Arming

The system arms immediately after you switch the ignition off.

Automatic Disarming

Switching the ignition on with a coded key disarms the system.

58

image556

You must have two previously programmed coded keys and the new unprogrammed key readily accessible. See an authorized dealer to have the spare key programmed if two previously programmed coded keys are not available.

Read and understand the entire procedure before you begin.

image557

Super Duty (), enUSA

image558image559

Security

image560

1.Insert the first previously programmed coded key into the ignition.

2.Switch the ignition from off to on. Keep the ignition on for at least three seconds, but no more than 10 seconds.

3.Switch the ignition off and remove the first coded key from the ignition.

4.After three seconds but within 10 seconds of switching the ignition off, insert the second previously coded key into the ignition.

5.Switch the ignition from off to on. Keep the ignition on for at least three seconds, but no more than 10 seconds.

6.Switch the ignition off and remove the second previously programmed coded key from the ignition.

7.After three seconds but within 10 seconds of switching the ignition off and removing the previously programmed coded key, insert the new unprogrammed key into the ignition.

8.Switch the ignition from off to on. Keep the ignition on for at least six seconds until you hear the door locks cycle.

9.Remove the newly programmed coded key from the ignition.

The key will start the engine if programming is successful. You can operate the remote entry system if the new key is an integrated keyhead transmitter.

If programming was not successful, wait 20 seconds and repeat Steps 1 through 8. If you are still unsuccessful, take your vehicle to an authorized dealer.

The direction indicators flash and the horn sounds if the system triggers while the alarm is armed.

Take all remote controls to an authorized dealer if there is any potential alarm problem with your vehicle.

Arming the Alarm

The alarm is ready to arm when there is not a key in the ignition. Electronically lock the vehicle to arm the alarm.

The direction indicators flash once after you lock the vehicle. This indicates the alarm is in the pre-armed mode. It will fully arm in 20 seconds.

Disarming the Alarm

Disarm the alarm by any of the following actions:

Press the power door unlock button within the 20-second pre-armed mode.

Unlock the doors with the remote control or keyless entry keypad.

Switch the ignition on or start the vehicle.

Use a key in the driver door to unlock the vehicle, then switch the ignition on within 12 seconds.

Note: Pressing the panic button on the remote control will stop the horn and signal indicators, but will not disarm the system.

ANTI-THEFT ALARM (IF EQUIPPED)

The system warns you of an unauthorized

entry to your vehicle. It triggers if any door

or the hood opens without using the key,

remote control or keyless entry keypad.

59

image561image562

Super Duty (), enUSA

image563image564

Steering Wheel

image565

ADJUSTING THE STEERING WHEEL

WARNING

image566

Do not adjust the steering wheel when your vehicle is moving.

image567image568

Note: Make sure that you are sitting in the correct position. See Sitting in the Correct Position (page 110).

image569

image570 2

image5712

1

E95178

1.Unlock the steering column.

2.Adjust the steering wheel to the desired position.

3

image572

E95179

3. Lock the steering column.

AUDIO CONTROL (IF EQUIPPED)

You can operate the following functions with the control:

image573

E163051

AMedia

BVolume up

CVolume down

DSeek down or previous E Seek up or next

60

image574image575

Super Duty (), enUSA

image576image577

Steering Wheel

image578

Media

Press repeatedly to scroll through available audio modes.

Seek, Next or Previous

Press the seek button to:

tune the radio to the next or previous stored preset

play the next or the previous track. Press and hold the seek button to:

tune the radio to the next station up or down the frequency band

seek through a track.

CRUISE CONTROL (IF EQUIPPED)

image579

E163053

See Cruise Control (page 176).

VOICE CONTROL (IF EQUIPPED)

image580

E163052

AVoice recognition B Phone mode

See SYNC™ (page 323). See MyFord Touch™ (page 359).

image581

INFORMATION DISPLAY CONTROL

Type 1

image582

E163054

61

image583

Super Duty (), enUSA

image584image585

Steering Wheel

image586

Type 2

image587

E163055

See Information Displays (page 81).

HEATED STEERING WHEEL (IF

EQUIPPED)

See MyFord Touch™ (page 359).

62

image588image589

Super Duty (), enUSA

image590image591

Pedals

image592

ADJUSTING THE PEDALS (IF

EQUIPPED)

Note: Never use the controls while your feet are on the accelerator and brake pedals and the vehicle is moving.

You can find the control on the left side of the steering column. Press and hold the appropriate side of the control to move the pedals.

image593

A  B

E162916

A.Farther

B.Closer

You can save and recall the pedal positions with the memory feature. See Memory Function (page 113).

Note: Adjust the pedals only when your vehicle is in P (Park).

63

image594image595

Super Duty (), enUSA

image596image597

Wipers and Washers

image598

WINDSHIELD WIPERS

Note: Fully defrost the windshield before switching on the windshield wipers.

Note: Make sure the windshield wipers are switched off before entering a car wash.

Note: Clean the windshield and wiper blades if they begin to leave streaks or smears. If that does not resolve the issue, install new wiper blades.

Note: Do not operate the wipers on a dry windshield. This may scratch the glass, damage the wiper blades or cause the wiper motor to burn out. Always use the windshield washers before wiping a dry windshield.

image599

E171242

WINDSHIELD WASHERS

Note: Do not operate the wipers on a dry windshield. This may scratch the glass, damage the wiper blades or cause the wiper motor to burn out. Always use the windshield washer before wiping a dry windshield.

Note: Do not operate the washers when the washer reservoir is empty. This may cause the washer pump to overheat.

Press the end of the stalk to activate the washer.

A brief press causes a single wipe without washer fluid.

A quick press and hold causes the wipers to swipe three times with washer fluid.

A long press and hold will activate the wipers and washer fluid for up to 10 seconds.

A wipe will occur a few seconds after washing to clear any remaining washer fluid. This feature can be turned on and off in the information display.

Rotate the end of the control:

away from you to increase the wiper speed

toward you to decrease the wiper speed.

Speed dependent wipers

When your vehicle speed increases, the interval between wipes decreases.

image600

E171243

image601

64

image602

Super Duty (), enUSA

image603image604

Lighting

image605

LIGHTING CONTROL  Headlamp Flasher

image606

E163267

Rotate the headlamp control clockwise to the first position to turn on the parking lamps, instrument panel lamps, license plate lamps and tail lamps.

Rotate clockwise to the second position to also turn on the headlamps.

E163268

Pull the lever toward you to flash the headlamps and release the lever to switch the headlamps off.

AUTOLAMPS (IF EQUIPPED)

image607

High Beams

image608

image609 A image610

image611

E163269

E167827

Push the lever toward the instrument panel to switch the high beams on.

Push the lever toward the instrument panel again or pull the lever towards you to switch the high beams off.

65

image612

The autolamp system provides light sensitive automatic on-off control of the exterior lights normally controlled by the headlamp control.

To turn autolamps on, rotate the control to the fourth position.

To turn autolamps off, rotate the control to the first, second, or third position.

image613

Super Duty (), enUSA

image614image615

Lighting

image616

Note: If the vehicle is equipped with autolamps, it will have the headlamps on with windshield wipers feature. If the windshield wipers are turned on, the exterior lamps will turn on with the headlamp control in the autolamp position.

The autolamp system also keeps the lights on for a predetermined amount of time after the ignition switch is turned to off. You can change the amount of time the lamps stay on by using the programming procedure that follows:

Autolamps – Programmable Exit Delay

Programmable exit delay allows the length of the autolamp exit delay to be changed.

To program the auto lamp exit time delay:

1.Start with the ignition in the off position and the headlamp control in the autolamp position.

2.Turn the headlamp control to off.

3.Turn the ignition switch to on and then back to off.

4.Turn the headlamp control to the autolamp position. The headlamps will turn on.

5.Wait the desired amount of time for the exit delay you want (up to three minutes), then turn the headlamps off.

INSTRUMENT LIGHTING DIMMER

image617

E163270

Use to adjust the brightness of the instrument panel and all applicable lit components in the vehicle during headlamp and parking lamp operation.

Tap the top or bottom of the control to brighten/dim all interior lit components incrementally, or

Press and hold at the first position the top or bottom of the control until the desired lighting level is reached.

Press and hold the top of the control to the full on position to activate the “dome on” feature. This will turn on the interior courtesy lights. The lights will remain on until the bottom of the control is pressed.

DAYTIME RUNNING LAMPS (IF

EQUIPPED)

WARNING

image618

Always remember to switch your headlamps on in low light situations or during inclement weather. The

image619

system does not activate the tail lamps

and may not provide adequate lighting

during these conditions. Failure to activate

your headlamps under these conditions

may result in a collision.

image620

66

image621image622

Super Duty (), enUSA

image623image624

Lighting

image625

The system switches the headlamps on with a reduced output in daylight conditions.

To switch the system on:

1.Switch the ignition on.

2.Switch the lighting control to the off, or parking lamp position.

3.Disengage the parking brake.

4.Make sure the transmission selector lever is not in position P.

FRONT FOG LAMPS (IF EQUIPPED)

image626

image627 A image628

E163271

The headlamp control also operates the fog lamps. The fog lamps can be turned on only when the headlamp control is in the parking lamp (second) position, headlamps on (third) position, or autolamp (fourth) position, and the high beams are not turned on.

Pull headlamp control towards you to turn fog lamps on. The fog lamp indicator light will illuminate.

DIRECTION INDICATORS

image629

E163272

The turn signal lever does not mechanically lock in the upward or downward position when activated. The turn signal control activation and cancellation is electronic.

To operate the left turn signal, push the lever down until it stops and release.

To operate the right turn signal, push the lever up until it stops and release.

To manually cancel turn signal operation, push the lever again in either direction.

Lane Change

To indicate a left or right lane change:

Push the lever up/down to the first stop position and release. The turn signals will flash three times and stop.

Push the lever up/down to the first stop position and hold. The turn signals will flash for as long as the lever is held in this position.

INTERIOR LAMPS

The lamps will switch on when one of the

following conditions have been met:

67

image630image631

Super Duty (), enUSA

image632image633

Lighting

image634

Front Map Lamps (If equipped)

The map lamps are located on the overhead console. Press the controls on either side of each map lamp to turn on the lamps. The map lamps also light when:

any door is opened.

the instrument panel dimmer switch is pressed up until the courtesy lamps come on.

any of the remote entry controls are pressed and the ignition is off.

image635

E163273

Rear Dome and Map Lamps

image636

E163274

Your vehicle may have map lamps within the rear dome lamp. Press the switches on either side of the dome lamp to turn the lamps on.

68

image637image638

Super Duty (), enUSA

image639image640

Windows and Mirrors

image641

POWER WINDOWS (IF EQUIPPED)

WARNINGS

image642

Do not leave children unattended in your vehicle and do not let them play with the power windows. They may

image643

seriously injure themselves.

When closing the power windows, you should verify they are free of obstructions and make sure that

image644

children and pets are not in the proximity of the window openings.

image645image646

E163056

Note: Perform one-touch up re-calibration with the door closed. Calibrating with the door open will cause the window to continuously bounce back.

To reset the function after the battery recharges:

1.Pull the switch all the way up.

2.Hold the switch until the glass stops and continue to hold for two seconds.

3.Press the switch down and operate the window to the full down position. One-touch up will now be functional.

Bounce-Back (If Equipped)

The window will stop automatically while closing. It will reverse some distance if there is an obstacle in the way.

Overriding the Bounce-Back Feature

WARNING

image647

Note: You may hear a pulsing noise when just one of the windows is open. Lower the opposite window slightly to reduce this noise.

Press the switch to open the window.

When you override the bounce-back feature, the window will not reverse if it detects an obstacle. Take care

image648

when closing the windows to avoid personal injury or damage to your vehicle.

image649

Lift the switch to close the window.

One-Touch Up or Down (If Equipped)

Press or lift the switch fully and release it.

Press or lift it again to stop the window.

Note: The window may disable for up to five minutes if you cycle it up and down repeatedly. This helps prevent damage to the motor. Normal operation will resume once the motor cools.

Restoring the One-Touch Up Function

Pull up the window switch and hold within two seconds of the window reaching the bounce-back position. The window will travel up with no bounce-back protection. The window will stop if you release the switch before the window closes fully.

You may lose the one-touch function if the

vehicle battery is low.

69

image650image651

Super Duty (), enUSA

image652image653

Windows and Mirrors

image654

Window Lock (If Equipped)

image655

A  B

E163057

AUnlock

B Lock

Press the control to lock or unlock the rear window controls.

Power Sliding Back Window (If

Equipped)

WARNINGS

image656

When operating the power sliding back window, you must make sure all rear seat occupants and cargo are

image657

not in the proximity of the back window.

Do not leave children unattended in your vehicle and do not let them play with the power sliding back window.

image658

They may seriously injure themselves.

image659image660

E163058

Press and hold the control to open the window. Pull and hold the control to close the window.

Accessory Delay (If Equipped)

You can use the window switches for several minutes after you switch the ignition off or until you open either front door.

GLOBAL OPENING (IF EQUIPPED)

You can use the remote control to operate the windows with the ignition off.

Note: To operate this feature, accessory delay must not be active.

Opening the Windows

You can only open the windows for a short time after you unlock your vehicle with the remote control. After you unlock your vehicle, press and hold the remote control unlock button to open the windows. Release the button once movement starts. Press the lock or unlock button to stop movement.

EXTERIOR MIRRORS

Power Exterior Mirrors (If Equipped)

WARNING

image661

Do not adjust the mirrors when your vehicle is moving.

image662image663

The control is on the overhead console.

70

image664image665

Super Duty (), enUSA

image666image667

Windows and Mirrors

image668

image669 B image670

image671

A  image672 C

E163059

ALeft-hand mirror

BOff

CRight-hand mirror

To adjust a mirror:

1.Rotate the control to select the mirror you want to adjust.

2.Adjust the position of the mirror.

3.Return the control to the center position to lock mirrors in place.

Fold-Away Exterior Mirrors

For tight parking conditions, you can push the mirror toward the door window glass. Before driving, make sure that you fully engage the mirror in its support when returning it to its original position.

Power-Folding Mirrors (If Equipped)

image673

Note: If you repeatedly fold and unfold the mirrors several times within one minute, the system may disable to protect the motors from overheating. It will reset to normal function automatically within three to five minutes.

You can also fold a mirror manually by pushing it toward the door window glass. After you manually adjust the mirror, you will need to reset it.

To reset the power-folding mirror system and return it to its normal function:

Fold the mirror manually by pushing it toward the door window glass.

Use the power-fold control to fold and unfold the mirror two or three times. The mirror will make a sound as it resets.

Heated Exterior Mirrors (If Equipped)

See Heated Windows and Mirrors (page 108).

Memory Mirrors (If Equipped)

You can save and recall the mirror positions through the memory function. See Memory Function (page 113).

Clearance Lamps (If Equipped)

The lower, outer part of the mirror housings light when you switch the headlamps or parking lamps on.

E163060

1.Rotate the control so the dots line up.

2.Pull the control back to fold the mirrors in or out.

71

image674image675

Super Duty (), enUSA

image676image677

Windows and Mirrors

image678

Telescoping Mirrors (If Equipped)

image679

E163061

This feature lets you extend the mirror about 3 inches (75 millimeters). It is useful when towing a trailer. You can manually pull out or push in the mirrors to the desired position.

PowerScope™ Power Telescoping Mirrors (If Equipped)

This feature lets you position both mirrors in or out at the same time. The control is on the door trim panel.

image680

E163062

A

B

ATelescope Out B Telescope In

To adjust the mirrors:

Press and hold the control.

When you position the mirrors in or out, the motors will run as long as you hold the control. The running motors allow you to make adjustments as needed.

After positioning the mirrors, return the control to the center position to help protect the motors from overheating.

INTERIOR MIRROR

WARNING

image681

Do not adjust the mirror when your vehicle is moving.

image682image683

Note: Do not clean the housing or glass of any mirror with harsh abrasives, fuel or other petroleum or ammonia-based cleaning products.

You can adjust the interior mirror to your preference. Some mirrors also have a second pivot point. This lets you move the mirror head up or down and from side to side.

Pull the tab below the mirror toward you to reduce glare at night.

Auto-Dimming Mirror (If Equipped)

Note: Do not block the sensors on the front and back of the mirror. Mirror performance may be affected. A rear center passenger or raised rear center head restraint may also block light from reaching the sensor.

The mirror will dim automatically to reduce glare when bright lights are detected from behind your vehicle. It will automatically return to normal reflection when you select reverse gear to make sure you have a clear view when backing up.

72

image684image685

Super Duty (), enUSA

image686image687

Windows and Mirrors

image688

SUN VISORS

Slide-on-rod (If Equipped)

image689

E138666

Rotate the sun visor toward the side window and extend it rearward for extra shade.

Illuminated Vanity Mirror (If Equipped)

image690

E162197

Lift the cover to switch the lamp on.

MOONROOF (IF EQUIPPED)

WARNINGS

image691

Do not let children play with the moonroof or leave them unattended in the vehicle. They may seriously

image692

hurt themselves.

73

image693

WARNINGS

image694

When closing the moonroof, you should verify that it is free of obstructions and make sure that

image695

children and pets are not in the proximity of the roof opening.

image696

You can manually open or close the sliding shade when the moonroof is closed. Pull the shade toward the front of your vehicle to close it.

The moonroof controls are located on the overhead console and have a one-touch open and close feature. To stop it during one-touch operation, press the control a second time.

Opening and Closing the Moonroof

image697

E163063

Press and release the SLIDE control to open the moonroof. The moonroof will stop short of the fully opened position.

Note: This position helps to reduce wind noise or rumbling which may happen with the moonroof fully open. Press and release the control again to fully open the moonroof.

Pull and release the SLIDE control to close the moonroof.

image698

Super Duty (), enUSA

image699image700

Windows and Mirrors

image701

Bounce-Back

The moonroof will stop automatically while closing. It will reverse some distance if there is an obstacle in the way.

Pull and hold the SLIDE control within two seconds of a bounce-back event to override this function. While bounce-back is active, the closing force increases for each of the next three times that you close the moonroof.

Venting the Moonroof

Press and release the TILT control to vent the moonroof. Pull and hold the TILT control to close the moonroof.

74

image702image703

Super Duty (), enUSA

image704image705

Instrument Cluster

image706

GAUGES

image707

A  B

C  D

E163168  G

F  E

AEngine oil pressure gauge

BEngine coolant temperature gauge

CTransmission fluid temperature gauge D Fuel gauge
ESpeedometer

FInformation display See General Information (page 81). G Tachometer

75

image708image709

Super Duty (), enUSA

image710image711

Instrument Cluster

image712

Engine Oil Pressure Gauge

Indicates engine oil pressure. The needle should stay in the normal operating range (between L and H). If the needle falls below the normal range, stop the vehicle, turn off the engine and check the engine oil level. Add oil if needed. If the oil level is correct, have your vehicle checked by your authorized dealer.

Engine Coolant Temperature Gauge

WARNING

image713

Never remove the coolant reservoir cap while the engine is running or hot.

image714image715

Indicates engine coolant temperature. At normal operating temperature, the level indicator will be in the normal range. If the engine coolant temperature exceeds the normal range, stop the vehicle as soon as safely possible, switch off the engine and let the engine cool.

Transmission Fluid Temperature Gauge

Indicates transmission fluid temperature. At normal operating temperature, the level indicator will be in the normal range. If the transmission fluid temperature exceeds the normal range, stop the vehicle as soon as safely possible and verify the airflow is not restricted such as snow or debris blocking airflow through the grill. Also, higher than normal operating temperature can be caused by special operation conditions (i.e. snowplowing, towing or off-road use). Refer to Special operating conditions in the scheduled maintenance information for instructions. Operating the

76

image716

transmission for extended periods of time with the gauge in the higher than normal area may cause internal transmission damage. Altering the severity of the driving conditions is recommended to lower the transmission temperature into the normal range. If the gauge continues to show high temperatures, see your authorized dealer.

Fuel Gauge

Note: The fuel gauge may vary slightly when your vehicle is moving or on a gradient.

Switch the ignition on. The fuel gauge will indicate approximately how much fuel is left in the fuel tank. The arrow adjacent to the fuel pump symbol indicates on which side of your vehicle the fuel filler door is located.

The needle should move toward F when you refuel your vehicle. If the needle points to E after adding fuel, this indicates your vehicle needs service soon.

After refueling some variability in needle position is normal:

It may take a short time for the needle to reach F after leaving the gas station. This is normal and depends upon the slope of pavement at the gas station.

The fuel amount dispensed into the tank is a little less or more than the gauge indicated. This is normal and depends upon the slope of pavement at the gas station.

If the gas station nozzle shuts off before the tank is full, try a different gas pump nozzle.

Low Fuel Reminder

A low fuel reminder triggers when the fuel gauge needle is at 1/16th.

image717

Super Duty (), enUSA

image718image719

Instrument Cluster

image720

Variations:

image721

Driving type (fuel economy

Fuel gauge position

Distance-to-empty

conditions)

Highway driving

1/16th

35 miles to 80 miles (56 km

to 129 km)

Severe duty driving (trailer

1/16th

35 miles (56km)

towing, extended idle)

Information Display

Odometer

Located in the bottom of the information display Registers the accumulated distance your vehicle has traveled.

Trip Computer

See General Information (page 81).

Vehicle Settings and Personalization See General Information (page 81).

WARNING LAMPS AND INDICATORS

The following warning lamps and indicators will alert you to a vehicle condition that may become serious. Some lamps will illuminate when you start your vehicle to make sure they work. If any lamps remain on after starting your vehicle, refer to the respective system warning lamp for further information.

Note: Some warning indicators appear in the information display and function the same as a warning lamp but do not display when you start your vehicle.

Anti-Lock Braking System

If it illuminates when you are driving, this indicates a

image722

malfunction. You will continue to have the normal braking system (without ABS) unless the brake system warning lamp is also illuminated. Have the system checked by your authorized dealer.

Battery

If it illuminates while driving, it

image723

indicates a malfunction. Switch off all unnecessary electrical

equipment and have the system checked by your authorized dealer immediately.

Brake System

Illuminates when you engage the parking brake with the ignition

image724

E144522  on.

If it illuminates when you are driving, check that the parking brake is not engaged. If the parking brake is not engaged, this indicates low brake fluid level or a brake system malfunction. Have the system checked immediately by your authorized dealer.

77

image725image726

Super Duty (), enUSA

image727image728

Instrument Cluster

image729

WARNING

image730

Driving your vehicle with the warning lamp on is dangerous. A significant decrease in braking performance

image731

may occur. It will take you longer to stop your vehicle. Have your vehicle checked by your authorized dealer immediately. Driving extended distances with the parking brake engaged can cause brake failure and the risk of personal injury.

image732

Check Fuel Cap (If Equipped)

Illuminates when the fuel cap may not be properly installed.

image733

Continued driving with this light on may cause the Service engine

soon warning indicator to come on.

Cruise Control (If Equipped)

Illuminates when you switch this

feature on. See Using Cruise

E71340

Control (page 176).

image734

Engine Coolant Temperature

Illuminates when the engine coolant temperature is high. Stop the vehicle as soon as

image735

possible, switch off the engine and let cool.

Engine Oil

If it illuminates with the engine running or when you are driving,

image736

this indicates a malfunction. Stop your vehicle as soon as it is safe to do so and switch the engine off. Check the engine oil level. See Engine Oil Check (page 235).

Note: Do not resume your journey if it illuminates despite the level being correct. Have the system checked by your authorized dealer immediately.

Fasten Safety Belt

It will illuminate and a chime will sound to remind you to fasten your safety belt.

image737

Direction Indicator

Illuminates when the left or right turn signal or the hazard warning flasher is turned on. If the

image738

indicators stay on or flash faster, check for a burned out bulb.

Front Airbag

If it fails to illuminate when you

image739

image740 start your vehicle, continues to flash or remains on, it indicates a malfunction. Have the system checked

by your authorized dealer.

Door Ajar

Displays when the ignition is on and any door is not completely closed.

image741

Electronic Locking Differential

Illuminates when using the electronic locking differential.

image742

E163170

image743

High Beam

Illuminates when you switch the

image744

high beam headlamps on. It will flash when you use the

headlamp flasher.

Hill Descent (If Equipped)

Illuminates when hill descent is switched on.

image745

E163171

78

image746

Super Duty (), enUSA

image747image748

Instrument Cluster

image749

Low Fuel Level

Illuminates when the fuel level is low or the fuel tank is nearly empty. Refuel as soon as

image750

possible.

Low Tire Pressure Warning

Illuminates when your tire pressure is low. If the lamp remains on with the engine

image751

running or when driving, check your tire pressure as soon as possible.

It will also illuminate momentarily when you switch the ignition on to confirm the lamp is functional. If it does not illuminate when you switch the ignition on, or begins to flash at any time, have the system checked by your authorized dealer.

Powertrain Malfunction/Reduced Power/Electronic Throttle Control

Illuminates when a powertrain or an AWD fault has been detected. Contact your

image752

authorized dealer as soon as possible.

Service Engine Soon

If the service engine soon

image753

indicator light stays illuminated after the engine is started, it

indicates that the On-Board Diagnostics (OBD-II) system has detected a malfunction of the vehicle emissions control system. Refer to On-Board Diagnostics (OBD-II) in the Fuel and Refueling chapter for more information about having your vehicle serviced. See Emission Control System (page 141).

79

image754

If the light is blinking, engine misfire is occurring which could damage your catalytic converter. Drive in a moderate fashion (avoid heavy acceleration and deceleration) and have your vehicle serviced immediately.

Note: Under engine misfire conditions, excessive exhaust temperatures could damage the catalytic converter or other vehicle components.

The service engine soon indicator light illuminates when the ignition is first turned on prior to engine start to check the bulb and to indicate whether the vehicle is ready for Inspection/Maintenance (I/M) testing.

Normally, the service engine soon light will stay on until the engine is cranked, then turn itself off if no malfunctions are present. However, if after 15 seconds the service engine soon light blinks eight times, it means that the vehicle is not ready for I/M testing. See Emission Control System (page 141).

Stability Control

Illuminates when the system is active. If it remains illuminated

image755

E138639 or does not illuminate when you switch the ignition on, this indicates a malfunction. During a malfunction the system will switch off. Have the system checked by your authorized dealer immediately. See Using Stability Control (page 167).

Stability Control Off

Illuminates when you switch the

image756

image757image758 system off. It will go out when image759image760 you switch the system back on or when you switch the ignition off. See

Using Stability Control (page 167).

image761

Super Duty (), enUSA

image762image763

Instrument Cluster

image764

Transmission Tow/Haul (If Equipped)

Illuminates when the tow/haul feature has been activated. If the

image765

E161509 light flashes steadily, have the system serviced immediately, damage to the transmission could occur.

4X2 (If Equipped)

Illuminates momentarily when image766image767image768 two-wheel drive high is selected. E163173 If the light fails to display when

image769

the ignition is turned on, or remains on, have the system serviced immediately by your authorized dealer.

4X4 LOW (If Equipped)

Illuminates when four-wheel drive low is engaged. If the light

image770

E163174 fails to display when the ignition is turned on, or remains on, have the system serviced immediately by your authorized dealer.

4X4 HIGH (If Equipped)

Illuminates when four-wheel drive high is engaged. If the light

image771

E163175 fails to display when the ignition is turned on, or remains on, have the system serviced immediately by your authorized dealer.

Diesel Warning Lights

If your vehicle is equipped with a diesel engine, it has some unique warning lights; refer to your diesel supplement for detailed information on their function.

Diesel engine brake

Diesel exhaust fluid

For more information see your diesel supplement.

image772

E163176

Glow plug pre-heat

For more information see your diesel supplement.

image773

Water in fuel

For more information see your diesel supplement.

image774

AUDIBLE WARNINGS AND INDICATORS

Headlamps On Warning Chime

Sounds when you remove the key from the ignition and open the driver’s door and you have left the headlamps or parking lamps on.

Key in Ignition Warning Chime

Sounds when you open the driver’s door and you have left the key in the ignition with it in the off or accessory position.

Parking Brake On Warning Chime

Sounds when you have left the parking brake on and drive your vehicle. If the warning chime remains on after you have released the parking brake, have the system checked by your authorized dealer immediately.

For more information see your

image775

diesel supplement.

E171217

80

image776image777

Super Duty (), enUSA

image778image779

Information Displays

image780

GENERAL INFORMATION

WARNING

image781

Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that

image782

you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible. Make sure you are aware of all applicable local laws that may affect the use of electronic devices while driving.

image783

You can control various systems on your vehicle using the information display controls on the steering wheel. The information display provides the corresponding information.

Information Display Controls (Type 1)

image784

E163177

Press the INFO button to scroll through trip, outside temperature, fuel usage, trailer gain and MyKey® information.

Press the SETUP button to scroll through various vehicle feature settings.

Press the RESET button to choose settings, reset information and confirm messages.

Info

Press the INFO button repeatedly to cycle

through the following features:

Note: Some options may appear slightly

different or not at all if the items are

optional.

81

image785image786

Super Duty (), enUSA

image787image788

Information Displays

image789image790

INFO

image791 TRIP A/B

image792 XXX° (if equipped)

image793 MYKEY MILES (km) (if programmed)

image794 XXX MILES (km) TO E

image795 XX.X AVG MPG (L/100km)

image796 MPG (L/km)

image797 TIMER

image798 TBC GAIN (if equipped)

EXHAUST FILTER (diesel only)

TRIP A/B

Registers the distance of individual journeys. Press and release the INFO button until TRIP A/B appears in the display (this represents the trip mode). Press and hold the RESET button to reset.

XXX° (outside air temperature) This displays the outside temperature.

MYKEY MILES (km)

For more information, See Principle of Operation (page 50).

XXX MILES (km) TO E

This displays an estimate of approximately how far you can drive with the fuel remaining in your tank under normal driving conditions. Remember to turn the ignition off when refueling to allow this feature to detect the correct amount of added fuel.

The system calculates the distance to empty by using a running average fuel economy, which uses your recent driving history of 500 miles (800 km).

This value is not the same as the average fuel economy display. The running average fuel economy resets to a factory default value if the battery is disconnected.

XX.X AVG MPG (L/100km)

Average fuel economy displays your average fuel economy in miles per gallon or liters/100 km.

MPG (L/km)

Displays the instantaneous fuel economy as a bar graph. Your vehicle must be moving to calculate instantaneous fuel economy. You cannot reset the instantaneous fuel economy.

TIMER

Displays the trip elapsed drive time. Press and release RESET to pause the timer. Press and hold RESET to reset the timer.

TBC GAIN

Displays the level of trailer brake gain or if the trailer is not connected.

82

image799image800

Super Duty (), enUSA

image801image802

Information Displays

image803

EXHAUST FILTER

For more information, refer to the Diesel supplement.

System check and vehicle feature customization

Press the SETUP button repeatedly to cycle the information display through the following features:

Note: Some options may appear slightly different or not at all if the items are optional.

Note: When returning to the SETUP menu and you selected a non-English language, HOLD RESET FOR ENGLISH will display to change back to English. Press and hold the RESET button to change back to English.

image804

SETUP

RESET FOR SYSTEM

press the RESET button

OIL LIFE

CHECK

EXHAUST FLUID LEVEL

(Diesel only)

ENGINE HOURS

ENGINE IDLE HOURS

CHARGING SYSTEM

DOOR

BRAKE SYSTEM

TBC GAIN = XX.X

FUEL LEVEL

MYKEY DISTANCE

SETUP (cont’d)

RESET FOR

press the RESET

MYKEY(S) PROGRAMMED

SYSTEM CHECK

button

ADMIN KEYS PROGRAMMED

OIL LIFE

UNITS

press the RESET

English or Metric

AUTOLAMP (SEC)

button

0 to 180 seconds

AUTOLOCK

On or Off

AUTOUNLOCK

On or Off

COURTESY WIPE

On or Off

83

image805image806image807

Super Duty (), enUSA

image808image809

Information Displays

image810image811

SETUP (cont’d)

REMOTEWINDOW

On or Off

OPEN

CREATE MYKEY / MYKEY SETUP / CLEAR MYKEY

RESET FOR REMOTE START

press the RESET On or Off

button

5, 10, 15 minutes

TBC MODE

Electric or EOH

TBC EFFORT

LOW, MED or HIGH

TRAILER SWAY

On or Off

LANGUAGE = ENGLISH / SPANISH /

English / Spanish / French

FRENCH

PRESS RESET FOR SYSTEM CHECK

3. Once OIL LIFE SET TO XXX% is

displayed, release and press the RESET

The information display will begin to cycle

button to change the Oil Life Start

Value. Each release and press will

through the vehicle systems and provide

reduce the value by 10%.

a status of the item if needed.

UNITS

Note: Some systems show a message only

if a condition is present

Displays the current units English or Metric

OIL LIFE

Displays the remaining oil life. An oil change is required whenever indicated by the information display and according to the recommended maintenance schedule. USE ONLY RECOMMENDED ENGINE OILS.

To reset the oil monitoring system to 100% after each oil change, perform the following:

1.Press and release the SETUP button to display OIL LIFE XXX% HOLD RESET = NEW.

2.Press and hold the RESET button for two seconds and release to reset the oil life to 100%.

Note: To change oil life 100% value (if equipped with this feature) to another value, proceed to Step 3.

AUTOLAMP (SEC)

This feature keeps your headlights on for up to three minutes after the ignition is switched off.

AUTOLOCK

This feature automatically locks all vehicle doors when the vehicle is shifted into any gear, putting the vehicle in motion.

AUTOUNLOCK

This feature automatically unlocks all vehicle doors when the driver’s door is opened within 10 minutes of the ignition being turned off.

84

image812image813

Super Duty (), enUSA

image814image815

Information Displays

image816

COURTESY WIPE

This feature allows for an extra swipe of the wipers after a wipe/wash cycle.

CREATE MYKEY / MYKEY SETUP / CLEAR MYKEY

For more information, See Creating a MyKey (page 50).

RESET FOR REMOTE START (if equipped)

REAR PARK AID

This feature sounds a warning tone to warn the driver of obstacles near the rear bumper, and functions only when R (Reverse) gear is selected.

TBC MODE (if equipped)

Allows you to choose the trailer brake mode.

TBC EFFORT (if equipped)

Allows you to choose the level of initial braking.

TRAILER SWAY (if equipped)

This feature uses the electronic stability control to mitigate trailer sway.

LANGUAGE = ENGLISH / SPANISH / FRENCH

Allows you to choose which language the message center will display in.

Waiting four seconds or pressing the RESET button cycles the message center through each of the language choices.

Press the RESET button to set the language choice.

Information Display Controls

(Type 2) (If Equipped)

image817

E163178

Press the up and down arrow buttons to scroll through and highlight the options within a menu.

Press the right arrow button to enter a sub-menu.

Press the left arrow button to exit a menu.

Press the OK button to choose and confirm a setting/messages.

Main menu

You can access the menus using the information display control.

Gauge Mode

image818

E163179

85

image819image820

Super Duty (), enUSA

image821image822

Information Displays

image823

Trip A / B  Settings

image824image825

E138660

Fuel Economy

image826

E163180

Truck Apps (If Equipped)

image827

E163181

E144641

Information

image828

E144642

Display Mode

Use the arrow buttons to choose between the following gauge

image829

E163179  options.

image830

Gauge Mode

Gauges Detail image831 Engine Oil Temperature (Diesel only)

image832 Transmission Temperature

Compass  The compass orientation

can be changed between

fixed north or rotating north.

To change the modes, press

OK when the compass

display is shown. Use the

right arrow to choose the

mode. Press and hold OK to

set the mode.

Exhaust Filter (diesel only). Refer to your diesel supple-ment for more information.

image833 Blank

Trip A / B

Use the arrow buttons to choose

image834

between the following trip

E138660  options.

86

image835image836

Super Duty (), enUSA

image837image838

Information Displays

image839image840

Trip A / B

image841 Trip time

image842 Trip distance

image843 Fuel used

image844 Avg MPG (L/100km)

image845 Odometer

Press OK to pause the Trip A or B screen, press again to un-pause.

Press and hold OK to reset the currently displayed trip information.

Trip time

This shows the elapsed trip time. The timer will stop when your vehicle is turned off and will restart when your vehicle is restarted.

Trip distance

Registers the mileage of individual journeys.

image846

Fuel used

Shows the amount of fuel used for a given trip.

Average MPG

Shows the average distance traveled per unit of fuel used for a given trip.

Fuel Economy

Use the arrow buttons to choose the desired fuel economy

image847

E163180  display.

Fuel Economy

Fuel Econ. image848 Instant MPG (L/100km)

image849 Miles (kilometers) to Empty

image850 AVG MPG (L/100km)

image851 Fuel Hist. image852 5, 10, 30 Minutes or Last 5 Resets

Instant MPG

Shows your instantaneous fuel usage.

Miles to empty

Shows the approximate distance your vehicle can travel before running out of fuel.

Average MPG

Shows the average fuel usage based on time. Press and hold OK to reset this value.

87

image853image854

Super Duty (), enUSA

image855image856

Information Displays

image857

Fuel Hist.

Shows fuel usage as a bar graph based on time. The graph is updated each minute with the fuel economy that was achieved during the prior 5, 10, 30 minutes of driving.

Truck Apps

In this mode, off-road image858 information depicted with E163181 graphics and trailer towing

image859

application options are available.

Note: Some items are optional and may not appear.

image860

Truck Apps

Off Road image861 Pitch and bank angle (in degrees)

image862 Steering angle (in degrees)

image863 Differential lock/unlock

image864 Energy flow

Press OK for Info image865 ELD (Electronic Locking Differential)

image866 Hill Descent Control

image867 4X4 System

image868 Traction Control

image869 AdvanceTrac + RSC

Trailer  image870 Active trailer name or default trailer

image871 Accumulated trailer distance

image872 Trailer gain and output

image873 Trailer Disconnected

Press OK for options image874 Options

image875 Change Active Trailer

image876 Adding a new trailer

Connection Checklist (if Conventional, Fifth

equipped)  Wheel or Gooseneck

image877 Delete Trailer

Information Screen  Tow / Haul or Trailer

Brake Controller

88

image878image879

Super Duty (), enUSA

image880image881

Information Displays

image882image883

Truck Apps (cont’d)

Trailer (cont’d)  Press OK for options

Trailer disconnected

Disregard this status if your vehicle is not equipped with a factory installed trailer brake controller. This message may appear when an aftermarket TBC is used even when the trailer is connected.

Change Active Trailer

When this is highlighted, press the right arrow key to change the currently selected trailer. Use the up and down arrows to select a trailer and press the OK button to choose the highlighted trailer.

Adding a new trailer

Use the up/down arrows to highlight New Trailer and press the right arrow key to enter the New Trailer input screen. Use the up/down arrow keys to choose alpha, numeric and symbol characters and then press the right arrow to move the character space over. Continue adding characters as needed. Press the left arrow to go back and change a previously selected character. When finished with the new trailer name, press OK to accept the new trailer name.

image884 Rename Trailer

Reset Trailer Mileage / Kilometers (if equipped)

Connection Checklist

Use the up/down arrows to highlight one of these choices and press OK to display the connection checklist. Follow the on-screen instructions to go through the connections list.

Delete Trailer

Use the up/down arrows to highlight the trailer you want to delete and press OK to delete. Follow the on-screen prompts to exit or confirm delete.

Rename Trailer

Use the up/down buttons to highlight a trailer and press OK to select it. Use the up/down arrow buttons to change the characters as needed. When done, press OK to accept the change.

Reset Trailer Mileage / Kilometers

Use the up/down buttons to select a trailer, then press and hold OK to reset the trailer mileage (kilometers).

Settings

Use the arrow buttons to

image885

configure different driver setting

E144641  choices.

Note: Some items are optional and may not appear.

89

image886image887

Super Duty (), enUSA

image888image889

Information Displays

image890

Settings

Driver

Rear Park Aid

On or Off

Assist

Rear Video Camera

Camera Delay

On or Off

Trailer Brake

Mode

Electric or Elect. Over

Hydraulic

Effort

Light, Medium or Heavy

Trailer Sway Control

On or Off

Vehicle

Autolamp Delay

Off or XXX seconds

DTE Calculation

Normal

(distance to empty)

Towing

Easy Entry/Exit

On or Off

Locks

Autolock

On or Off

Autounlock

On or Off

Unlocking

One Stage or Two

Stage

Maintenance

Coolant (if equipped)

Hold OK if Coolant

Changed

Fuel Filter (diesel only)

Hold OK if Fuel Filter

Changed

Settings (cont’d)

Vehicle

Menu Control

Standard or Memory On

(cont’d)

Oil Life Reset

Set to XXX% (Hold OK to Reset)

Remote Start

Duration

5, 10 or 15 minutes

System

Enable or Disable

Windows

Remote Open

On or Off

Wiper Control

Courtesy Wipe – On or Off

image891

90

image892image893

Super Duty (), enUSA

image894image895

Information Displays

image896image897

Settings (cont’d)

MyKey

Create MyKey

Hold OK to Create MyKey

AdvanceTrac

Always On or Selectable

MAX Speed

80 MPH (130 km/h) or Off

Speed Warning

45, 55 or 65 MPH (75, 90 or 105 km/h), Off

Volume Limiter

On or Off

Clear MyKey

Hold OK to Clear MyKey

Language

English, Français, Español

Units

Distance

English

Metric

Temperature

Fahrenheit (°F)

Celsius (°C)

Information

In this mode, you can view

E144642

different vehicle system

information and perform a

system check.

Information

MyKey

Admin Keys (Number of admin keys)

MyKeys (Number of MyKeys programmed)

MyKey Miles (km) (Distance traveled using a programmed

MyKey)

System Check

Some items will only display during a system check if a

problem has been detected. If an issue exists on one of

image898image899

the monitored systems, the number of warnings that need immediate attention will display in red and the number of informational warnings will display in amber. Use the up/ down arrow buttons to scroll through the list; press the right arrow button to display specific information on the highlighted warning

91

image900image901

Super Duty (), enUSA

image902image903

Information Displays

image904

Compass/Transmission indicator display (if equipped)

The compass heading will display in the upper right corner of the information display; the transmission gear indicator displays in the right side of the information display when using the SelectShift Automatic™ transmission feature. These displays will not be shown in all screen modes. For example: when programming certain vehicle features or in certain information menus.

INFORMATION MESSAGES

Note: Depending on your vehicle options and instrument cluster type, not all of the messages will display or be available.

Additionally, the information display may abbreviate or shorten certain messages.

Press the RESET button for Type 1 displays or the OK button for Type 2 displays to acknowledge and remove some messages from the information display. The information display will automatically remove other messages after a short time.

You need to confirm certain messages before you can access the menus.

AdvanceTrac™

image905

Message

Action

SERVICE ADVAN-

The system detects a condition that requires service. Have

CETRAC

the system checked by an authorized dealer.

ADVANCETRAC OFF

The driver has disabled the stability control system. See

Using Stability Control (page 167).

TRACTION CONTROL

The driver has disabled the traction control system. See Using

OFF

Traction Control (page 165).

Alarm

image906

Message

Action

TO STOP ALARM

An unauthorized entry has triggered the alarm. See Anti-Theft

START VEHICLE

Alarm (page 59).

SECURITY SYSTEM

The security system has detected a fault. Have the system

FAULT

checked by an authorized dealer.

92

image907image908

Super Duty (), enUSA

image909image910

Information Displays

image911

Diesel Messages

WARNING

When the CLEANING EXHAUST

FILTER message appears in the

information display, do not park near

flammable materials, vapors or structures

until filter cleaning is complete.

Message

Action

CHECK COOLANT

The coolant additive needs checking. Refer to your diesel

ADDITIVE

supplement for more information.

CLEANING EXHAUST

Your vehicle has entered the cleaning mode. Various engine

FILTER

actions will raise the exhaust temperature in the Diesel

Particulate Filter system to burn off the particles (exhaust

soot). After the vehicle burns the particles off the exhaust

temperature will return to normal levels. This message is

NORMAL. Refer to your diesel supplement for more informa-

tion.

EXHAUST OVER-