Ford 2016 EDGE Owner’s Manual

October 2015

First Printing

Owner’s Manual

Edge

Litho in U.S.A.

image1image2

2016 EDGE Owner’s Manual

2016 EDGE Owner’s Manual

image3

GT4J 19A321 AA

image4image5The information contained in this publication was correct at the time of going to print. In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation. No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission. Errors and omissions excepted.

© Ford Motor Company 2015

All rights reserved.

Part Number: 20150903182520

image6image7

image8image9

Table of Contents

image10

Introduction

About This Manual  7

Symbols Glossary  7

Data Recording  9

California Proposition 65  11

Perchlorate  11

Ford Credit  11

Replacement Parts

Recommendation  11

Special Notices  12

Mobile Communications

Equipment  12

Export Unique Options  13

Environment

Protecting the Environment  14

Child Safety

General Information  15

Installing Child Restraints  16

Booster Seats  24

Child Restraint Positioning  26

Child Safety Locks  27

Seatbelts

Principle of Operation  29

Fastening the Seatbelts  30

Seatbelt Height Adjustment  34

Seatbelt Warning Lamp and Indicator

Chime  34

Seatbelt Reminder  35

Child Restraint and Seatbelt

Maintenance  36

Driver and Passenger Airbags  39

Front Passenger Sensing System  40

Side Airbags  42

Driver and Passenger Knee Airbags  43

Safety Canopy™  44

Crash Sensors and Airbag Indicator  45

Airbag Disposal  46

Keys and Remote Controls

General Information on Radio

Frequencies  47

Remote Control  47

Replacing a Lost Key or Remote

Control  51

MyKey™

Principle of Operation  52

Creating a MyKey  53

Clearing All MyKeys  54

Checking MyKey System Status  55

Using MyKey With Remote Start

Systems  56

MyKey Troubleshooting  56

Locks

Locking and Unlocking  58

Manual Liftgate  62

Power Liftgate  63

Keyless Entry  66

Security

Passive Anti-Theft System  69

Anti-Theft Alarm  70

Personal Safety System™

Steering Wheel

Personal Safety System™……………………..

37

Adjusting the Steering Wheel – Vehicles

With: Manual Adjustable Steering

72

Supplementary Restraints

Column…………………………………………………..

System

Adjusting the Steering Wheel – Vehicles

Principle of Operation…………………………….

38

With: Power Adjustable Steering

72

Column…………………………………………………..

1

image11image12

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image13image14

Table of Contents

image15

Audio Control – Vehicles Without: Voice

Control  73

Audio Control – Vehicles With: Voice

Control  74

Voice Control  74

Cruise Control  74

Information Display Control  75

Heated Steering Wheel  75

Wipers and Washers

Windshield Wipers  76

Autowipers  76

Windshield Washers  77

Rear Window Wiper and Washers  78

Lighting

General Information  79

Lighting Control  79

Autolamps  80

Instrument Lighting Dimmer  81

Headlamp Exit Delay  81

Daytime Running Lamps  81

Automatic High Beam Control  82

Direction Indicators  83

Interior Lamps  83

Ambient Lighting  85

Windows and Mirrors

Power Windows  86

Global Opening  87

Exterior Mirrors  87

Interior Mirror  89

Sun Visors  89

Moonroof  89

Information Displays

General Information  98

Information Messages  108

Climate Control

Manual Climate Control – Vehicles With:

Electronic Manual Temperature

Control (EMTC)  123

Automatic Climate Control – Vehicles

With: Dual Automatic Temperature

Control (DATC)/Premium AM/FM/

CD  125

Automatic Climate Control – Vehicles

With: Dual Automatic Temperature

Control (DATC)/Sony Audio

System  126

Hints on Controlling the Interior

Climate  128

Heated Windows and Mirrors  130

Cabin Air Filter  130

Remote Start  130

Seats

Sitting in the Correct Position  132

Head Restraints  132

Manual Seats  134

Power Seats  134

Memory Function  136

Rear Seats  138

Heated Seats  139

Climate Controlled Seats  140

Rear Seat Armrest  141

Universal Garage Door

Opener

Universal Garage Door Opener  142

Instrument……………………………………………………….Cluster

91

Auxiliary Power Points

Gauges

Auxiliary Power Points…………………………..

147

Warning Lamps and Indicators…………….

94

Audible Warnings and Indicators………….

97

2

image16image17

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image18image19

Table of Contents

image20

Storage Compartments

Center Console  149

Overhead Console  149

Starting and Stopping the

Engine

General Information  150

Keyless Starting – Vehicles With: Push

Button Start  150

Starting a Gasoline Engine  151

Engine Block Heater  154

Unique Driving Character-

istics

Auto-Start-Stop  156

Fuel and Refueling

Safety Precautions  158

Fuel Quality  159

Fuel Filler Funnel Location  159

Running Out of Fuel  159

Refueling  160

Fuel Consumption  162

Emission Control System  163

Transmission

Automatic Transmission  166

All-Wheel Drive

Using All-Wheel Drive  170

Brakes

General Information  175

Hints on Driving With Anti-Lock

Brakes  175

Electric Parking Brake  176

Hill Start Assist  178

Traction Control

Principle of Operation  180

3

image21

Using Traction Control  180

Stability Control

Principle of Operation  181

Using Stability Control  182

Parking Aids

Principle of Operation  183

Rear Parking Aid  183

Front Parking Aid  184

Side Sensing System  185

Active Park Assist  187

Rear View Camera  192

180 Degree Camera  195

Cruise Control

Principle of Operation  197

Using Cruise Control  197

Using Adaptive Cruise Control  198

Driving Aids

Driver Alert  204

Lane Keeping System  205

Blind Spot Information System  209

Cross Traffic Alert  211

Steering  214

Collision Warning System  216

Drive Control  218

Load Carrying

Rear Under Floor Storage  219

Cargo Nets  219

Roof Racks and Load Carriers  219

Load Limit  220

Towing

Towing a Trailer  227

Trailer Sway Control  228

Recommended Towing Weights  228

image22

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image23image24

Table of Contents

image25

Essential Towing Checks  230

Transporting the Vehicle  232

Towing the Vehicle on Four Wheels –

6-Speed Automatic Transmission –

6F35  232

Towing the Vehicle on Four Wheels –

6-Speed Automatic Transmission –

6F50/6F55  233

Driving Hints

Breaking-In  235

Economical Driving  235

Cold Weather Precautions  235

Driving Through Water  235

Floor Mats  236

Roadside Emergencies

Roadside Assistance  238

Hazard Warning Flashers  239

Fuel Shutoff  239

Jump Starting the Vehicle  240

Post-Crash Alert System  242

Customer Assistance

Getting the Services You Need  243

In California (U.S. Only)  244

The Better Business Bureau (BBB) Auto

Line Program (U.S. Only)  245

Utilizing the Mediation/Arbitration

Program (Canada Only)  246

Getting Assistance Outside the U.S. and

Canada  246

Ordering Additional Owner’s

Literature  247

Reporting Safety Defects (U.S.

Only)  248

Reporting Safety Defects (Canada

Only)  248

Fuses

Fuse Specification Chart  250

Changing a Fuse  260

image26

4

Maintenance

General Information  261

Opening and Closing the Hood  261

Under Hood Overview – 2.0L

EcoBoost™  263

Under Hood Overview – 2.7L

EcoBoost™  264

Under Hood Overview – 3.5L  265

Engine Oil Dipstick – 2.0L

EcoBoost™  266

Engine Oil Dipstick – 2.7L EcoBoost™/

3.5L  266

Engine Oil Check  266

Oil Change Indicator Reset  267

Engine Coolant Check  267

Automatic Transmission Fluid Check –

2.0L EcoBoost™  270

Automatic Transmission Fluid Check –

2.7L EcoBoost™/3.5L  271

Brake Fluid Check  272

Power Steering Fluid Check  273

Washer Fluid Check  273

Fuel Filter  273

Changing the 12V Battery  274

Checking the Wiper Blades  275

Changing the Wiper Blades  275

Adjusting the Headlamps  276

Removing a Headlamp  278

Changing a Bulb  278

Bulb Specification Chart  280

Changing the Engine Air Filter  282

Vehicle Care

General Information  283

Cleaning Products  283

Cleaning the Exterior  283

Waxing  284

Cleaning the Engine  285

Cleaning the Windows and Wiper

Blades  285

Cleaning the Interior  286

image27

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image28image29

Table of Contents

image30

Cleaning the Instrument Panel…………………..and

286

Audio Unit – Vehicles With: Premium AM/

Instrument Cluster Lens

FM/CD………………………………………………….

347

Cleaning Leather Seats………………………..

287

Audio Unit – Vehicles With: Sony AM/FM/

Repairing Minor Paint Damage……………

287

CD………………………………………………………..

348

Cleaning the Alloy Wheels…………………..

287

Digital Radio……………………………………………

351

Vehicle Storage……………………………………..

288

Satellite Radio……………………………………….

353

Wheels and Tires

USB Port…………………………………………………

356

Media Hub………………………………………………

356

General Information……………………………..

290

SYNC™

Tire Sealant and Inflator Kit………………..

292

Tire Care………………………………………………….

298

General Information………………………………

357

Using Summer Tires………………………………

315

Using Voice Recognition………………………

359

Using Snow Chains………………………………..

315

Using SYNC™ With Your Phone………….

361

Tire Pressure Monitoring System………..

316

SYNC™ Applications and Services…….

373

Changing a Road Wheel……………………….

319

Using SYNC…………………………………………………..™WithYourMedia

378

Technical Specifications………………………

323

Player

SYNC™ Troubleshooting……………………..

387

Capacities and Specific-

ations

Engine Specifications – 2.0L

EcoBoost™  325

Engine Specifications – 2.7L

EcoBoost™  325

Engine Specifications – 3.5L  326

Motorcraft Parts – 2.0L EcoBoost™  327

Motorcraft Parts – 2.7L EcoBoost™  328

Motorcraft Parts – 3.5L  329

Vehicle Identification Number  330

Vehicle Certification Label  331

Transmission Code Designation  331

Capacities and Specifications – 2.0L

EcoBoost™  332

Capacities and Specifications – 2.7L

EcoBoost™  335

Capacities and Specifications – 3.5L  339

Audio System

General Information  343

Audio Unit – Vehicles With: AM/FM/CD/

SYNC  344

image31

5

Accessories

Accessories  395

Extended Service Plan

(ESP)

Extended Service Plan (ESP)  397

Scheduled Maintenance

General Maintenance Information  399

Normal Scheduled Maintenance  402

Special Operating Conditions Scheduled

Maintenance  405

Scheduled Maintenance Record  407

Appendices

End User License Agreement  418

Type Approvals  434

image32

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image33image34

6

image35image36

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image37image38

Introduction

image39

ABOUT THIS MANUAL

Thank you for choosing Ford. We recommend that you take some time to get to know your vehicle by reading this manual. The more that you know about your vehicle, the greater the safety and pleasure you will get from driving it.

WARNING

image40

Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that

image41

you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible. Make sure you are aware of all applicable local laws that may affect the use of electronic devices while driving.

image42

Note: This manual describes product features and options available throughout the range of available models, sometimes even before they are generally available. It may describe options not fitted to the vehicle you have purchased.

Note: Some of the illustrations in this manual may show features as used in different models, so they may appear different to you on your vehicle.

Note: Always use and operate your vehicle in line with all applicable laws and regulations.

Note: Pass on this manual when selling your vehicle. It is an integral part of your vehicle.

This manual may qualify the location of a component as left-hand side or right-hand side. The side is determined when facing forward in the seat.

7

image43

E154903

image44

ARight-hand side. B Left-hand side.

SYMBOLS GLOSSARY

These are some of the symbols you may see on your vehicle.

Safety alert

image45

See Owner’s Manual

image46

Air conditioning system

image47

E162384

Anti-lock braking system

image48

Avoid smoking, flames or sparks

image49

Battery

image50

Battery acid

image51

Brake fluid – non petroleum based

image52image53

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image54image55

Introduction

image56

Brake system

image57

Cabin air filter

image58

Check fuel cap

image59

Child safety door lock or unlock

image60

Child seat lower anchor

image61

Child seat tether anchor

image62

Cruise control

image63

E71340

Front airbag

image64

Front fog lamps

image65

Fuel pump reset

image66

Fuse compartment

image67

Hazard warning flashers

image68

Heated rear window

image69

Heated windshield

image70

Do not open when hot

image71

Engine air filter

image72

Engine coolant

image73

Interior luggage compartment release

image74

Jack

image75

Keep out of reach of children

image76

E161353

Engine coolant temperature

Lighting control

Engine oil

Low tire pressure warning

Explosive gas

Maintain correct fluid level

Fan warning

Note operating instructions

Fasten seatbelt

Panic alarm

8

image77image78image79image80image81image82image83image84image85image86image87image88

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image89image90

Introduction

image91

Parking aid

image92

E139213

Parking brake

image93

Power steering fluid

image94

Power windows front/rear

image95

Power window lockout

image96

Service engine soon

image97

facilities may access or share among them vehicle diagnostic information received through a direct connection to your vehicle when diagnosing or servicing your vehicle. Additionally, when your vehicle is in for service or repair, Ford Motor Company, Ford of Canada, and service and repair facilities may access or share among them data for vehicle improvement purposes. For U.S. only (if equipped), if you choose to use the SYNC Vehicle Health Report, you consent that certain diagnostic information may also be accessed electronically by Ford Motor Company and Ford authorized service facilities, and that the diagnostic information may be used for any purpose. See SYNC™ (page 357).

Event Data Recording

Side airbag

image98

Shield the eyes

image99

Stability control

image100

E138639

Windshield wash and wipe

image101

DATA RECORDING

Service Data Recording

Service data recorders in your vehicle are capable of collecting and storing diagnostic information about your vehicle. This potentially includes information about the performance or status of various systems and modules in the vehicle, such as engine, throttle, steering or brake systems. In order to properly diagnose and service your vehicle, Ford Motor Company, Ford of Canada, and service and repair

9

image102

This vehicle is equipped with an event data recorder. The main purpose of an event data recorder is to record, in certain crash or near crash-like situations, such as an airbag deployment or hitting a road obstacle; this data will assist in understanding how a vehicle’s systems performed. The event data recorder is designed to record data related to vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less.

The event data recorder in this vehicle is designed to record such data as:

How various systems in your vehicle were operating;

Whether or not the driver and passenger safety belts were buckled/fastened;

How far (if at all) the driver was depressing the accelerator and/or the brake pedal; and

How fast the vehicle was traveling; and

Where the driver was positioning the steering wheel.

image103

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image104image105

Introduction

image106

This data can help provide a better understanding of the circumstances in which crashes and injuries occur.

Note: Event data recorder data is recorded by your vehicle only if a non-trivial crash situation occurs; no data is recorded by the event data recorder under normal driving conditions and no personal data or information (e.g., name, gender, age, and crash location) is recorded (see limitations regarding 911 Assist and Traffic, directions and Information privacy below). However, parties, such as law enforcement, could combine the event data recorder data with the type of personally identifying data routinely acquired during a crash investigation.

To read data recorded by an event data recorder, special equipment is required, and access to the vehicle or the event data recorder is needed. In addition to the vehicle manufacturer, other parties, such as law enforcement, that have such special equipment, can read the information if they have access to the vehicle or the event data recorder. Ford Motor Company and Ford of Canada do not access event data recorder information without obtaining consent, unless pursuant to court order or where required by law enforcement, other government authorities or other third parties acting with lawful authority. Other parties may seek to access the information independently of Ford Motor Company and Ford of Canada.

Note: Including to the extent that any law pertaining to Event Data Recorders applies to SYNC or its features, please note the following: Once 911 Assist (if equipped) is enabled (set ON), 911 Assist may, through any paired and connected cell phone, disclose to emergency services that the vehicle has been in a crash involving the deployment of an airbag or, in certain vehicles, the activation of the fuel pump shut-off. Certain versions or updates to 911 Assist may also be capable of being used to electronically or verbally provide to 911 operators the vehicle location (such as latitude and longitude), and/or other details about the vehicle or crash or personal information about the occupants to assist 911 operators to provide the most appropriate emergency services. If you do not want to disclose this information, do not activate the 911 Assist feature. See SYNC™ (page 357).

Additionally, when you connect to Traffic, Directions and Information (if equipped, U.S. only), the service uses GPS technology and advanced vehicle sensors to collect the vehicle’s current location, travel direction, and speed (“vehicle travel information”), only to help provide you with the directions, traffic reports, or business searches that you request. If you do not want Ford or its vendors to receive this information, do not activate the service. For more information, see Traffic, Directions and Information, Terms and Conditions. See SYNC™ (page 357).

10

image107image108

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image109image110

Introduction

image111

CALIFORNIAPROPOSITION65

WARNINGS

image112

Some constituents of engine exhaust, certain vehicle components, certain fluids contained in vehicles

image113

and certain products of component wear contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Battery posts, terminals and related accessories contain lead and lead compounds, chemicals known to the

image114

State of California to cause cancer and reproductive harm. Batteries also contain other chemicals known to the State of California to cause cancer. Wash your hands after handling.

image115

PERCHLORATE

Certain components in your vehicle such as airbag modules, safety belt pretensioners and remote control batteries may contain perchlorate material. Special handling may apply for service or vehicle end of life disposal.

For more information visit:

image116

Web Address

www.dtsc.ca.gov/hazardouswaste/

perchlorate

For your convenience we offer a number of ways to contact us, as well as to help manage your account.

Phone: 1-800-727-7000

For more information regarding Ford Credit, as well as to access Account Manager, please go to www.fordcredit.com.

REPLACEMENT PARTS RECOMMENDATION

Your vehicle has been built to the highest standards using quality parts. We recommend that you demand the use of genuine Ford and Motorcraft parts whenever your vehicle requires scheduled maintenance or repair. You can clearly identify genuine Ford and Motorcraft parts by looking for the Ford, FoMoCo or Motorcraft branding on the parts or their packaging.

Scheduled Maintenance and Mechanical Repairs

One of the best ways for you to make sure that your vehicle provides years of service is to have it maintained in line with our recommendations using parts that conform to the specifications detailed in this Owner’s Manual. Genuine Ford and Motorcraft parts meet or exceed these specifications.

Collision Repairs

FORD CREDIT

(U.S. Only)

Ford Credit offers a full range of financing and lease plans to help you acquire your vehicle. If you have financed or leased your vehicle through Ford Credit, thank you for your business.

11

image117

We hope that you never experience a collision, but accidents do happen. Genuine Ford replacement collision parts meet our stringent requirements for fit, finish, structural integrity, corrosion protection and dent resistance. During vehicle

image118

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image119image120

Introduction

image121

development we validate these parts deliver the intended level of protection as a whole system. A great way to know for sure you are getting this level of protection is to use genuine Ford replacement collision parts.

Warranty on Replacement Parts

Genuine Ford and Motorcraft replacement parts are the only replacement parts that benefit from a Ford Warranty. Damage caused to your vehicle as a result of the failure of non-Ford parts may not be covered by the Ford Warranty. For additional information, refer to the terms and conditions of the Ford Warranty.

SPECIAL NOTICES

New Vehicle Limited Warranty

For a detailed description of what is covered and what is not covered by your vehicle’s New Vehicle Limited Warranty, refer to the Warranty Manual that is provided to you along with your Owner’s Manual.

Special Instructions

For your added safety, your vehicle is fitted with sophisticated electronic controls.

WARNINGS

image122

You risk death or serious injury to yourself and others if you do not follow the instruction highlighted by

image123

the warning symbol. Failure to follow the specific warnings and instructions could result in personal injury.

Front seat mounted rear-facing child or infant seats should NEVER be placed in front of an active

image124

passenger airbag.

image125

12

image126

On-board Diagnostics (OBD-II)

Your vehicle’s On-board Diagnostics (OBD-II) system has a data port for diagnostics, repair and reprogramming services with diagnostic scan tools. Installing a non-Ford-approved aftermarket OBD plug-in device that uses the port during normal driving, for example remote insurance company monitoring, remote vehicle diagnostics, telematics or engine reprogramming, may cause interference or damage to vehicle systems. We do not recommend or endorse the use of any non-Ford-approved aftermarket OBD plug-in devices. The vehicle Warranty may not cover damage caused by any non-Ford-approved aftermarket OBD plug-in device.

MOBILE COMMUNICATIONS EQUIPMENT

Using mobile communications equipment is becoming increasingly important in the conduct of business and personal affairs. However, you must not compromise your own or others’ safety when using such equipment. Mobile communications can enhance personal safety and security when appropriately used, particularly in emergency situations. Safety must be paramount when using mobile communications equipment to avoid negating these benefits. Mobile communication equipment includes, but is not limited to, cellular phones, pagers, portable email devices, text messaging devices and portable two-way radios.

image127

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image128image129

Introduction

image130

WARNING

image131

Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that

image132

you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible. Make sure you are aware of all applicable local laws that may affect the use of electronic devices while driving.

image133

EXPORT UNIQUE OPTIONS

For your particular global region, your vehicle may be equipped with features and options that are different from the features and options that are described in this Owner’s Manual. A market unique supplement may be supplied that complements this book. By referring to the market unique supplement, if provided, you can properly identify those features, recommendations and specifications that are unique to your vehicle. This Owner’s Manual is written primarily for the U.S. and Canadian Markets. Features or equipment listed as standard may be different on units built for Export. Refer to this Owner’s Manual for all other required

information and warnings.

13

image134image135

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image136image137

Environment

image138

PROTECTING THE

ENVIRONMENT

You must play your part in protecting the environment. Correct vehicle usage and the authorized disposal of waste, cleaning and lubrication materials are significant steps toward this aim.

14

image139image140

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image141image142

Child Safety

image143

GENERAL INFORMATION

See the following sections for directions on how to properly use safety restraints for children.

WARNINGS

image144

Always make sure your child is secured properly in a device that is appropriate for their height, age and

image145

weight. Child safety restraints must be bought separately from your vehicle. Failure to follow these instructions and guidelines may result in an increased risk of serious injury or death to your child.

All children are shaped differently. The recommendations for safety restraints are based on probable

image146

child height, age and weight thresholds from the National Highway Traffic Safety Administration and other safety organizations, or are the minimum requirements of law. We recommend checking with a NHTSA Certified Child Passenger Safety Technician (CPST) and

image147

WARNINGS

image148

consult your pediatrician to make sure your child seat is appropriate for your child, and is compatible with and properly installed in your vehicle. To locate a child seat fitting station and CPST, contact NHTSA toll free at 1-888-327-4236 or go to http://www.nhtsa.dot.gov. In Canada, contact Transport Canada toll free at

1-800-333-0371 or go to www.tc.gc.ca to find a Child Car Seat Clinic in your area. Failure to properly restrain children in safety seats made especially for their height, age, and weight may result in an increased risk of serious injury or death to your child.

Do not leave children or animals unattended in the vehicle. On hot days, the temperature in the trunk or

image149

vehicle interior can rise very quickly. Exposure of people or animals to these high temperatures for even a short time can cause death or serious heat-related injuries, including brain damage. Small children are particularly at risk.

image150

15

image151

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image152image153

Child Safety

image154

Recommendations for Safety Restraints for Children

image155

Child  Child size, height, weight, or age  Recommended restraint

type

Infants or

toddlers

Small children

Children weighing 40 lb (18 kg) or less

Use a child safety seat

(sometimes called an

(generally age four or younger).

infant carrier, convertible

seat, or toddler seat).

Children who have outgrown or no longer

properly fit in a child safety seat (gener-

ally children who are less than 4 ft. 9 in.

Use a belt-positioning

(1.45 m) tall, are greater than age four

and less than age 12, and between 40 lb

booster seat.

(18 kg) and 80 lb (36 kg) and upward to

100 lb (45 kg) if recommended by your

child restraint manufacturer).

Children who have outgrown or no longer

Use a vehicle safety belt

properly fit in a belt-positioning booster

having the lap belt snug

seat (generally children who are at least

and low across the hips,

Larger children 4 ft. 9 in. (1.45 m) tall or greater than 80

shoulder belt centered

lb (36 kg) or 100 lb (45 kg) if recom-

across the shoulder and

mended by child restraint manufacturer).

chest, and seat back

upright.

You are required by law to properly use safety seats for infants and toddlers in the United States and Canada.

Many states and provinces require that small children use approved booster seats until they reach age eight, a height of 4 feet 9 inches (1.45 meters) tall, or 80 pounds (36 kilograms). Check your local and state or provincial laws for specific requirements about the safety of children in your vehicle.

When possible, always properly restrain children 12 years of age and under in a rear seating position of your vehicle. Accident statistics suggest that children are safer when properly restrained in the rear seating positions than in a front seating position. See

Front Passenger Sensing System (page 40).

INSTALLING CHILD RESTRAINTS

Child Seats

image156

E142594

16

image157image158

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image159image160

Child Safety

image161

Use a child safety seat (sometimes called an infant carrier, convertible seat, or toddler seat) for infants, toddlers, or children weighing 40 pounds (18 kilograms) or less (generally age four or younger).

Using Lap and Shoulder Belts

WARNINGS

image162

Airbags can kill or injure a child in a child seat. Never place a rear-facing child seat in front of an active airbag.

image163

If you must use a forward-facing child seat in the front seat, move the seat upon which the child seat is installed all the way back.

Airbags can kill or injure a child in a child seat. Children 12 and under should be properly restrained in the

image164

rear seat whenever possible.

Depending on where you secure a child restraint, and depending on the child restraint design, you may block

image165

access to certain safety belt buckle assemblies and LATCH lower anchors, rendering those features potentially unusable. To avoid risk of injury, occupants should only use seating positions where they are able to be properly restrained.

image166

When installing a child safety seat with combination lap and shoulder belts:

Use the correct safety belt buckle for that seating position.

Insert the belt tongue into the proper buckle until you hear a snap and feel it latch. Make sure the tongue is securely fastened in the buckle.

Keep the buckle release button pointing up and away from the safety seat, with the tongue between the child seat and the release button, to prevent accidental unbuckling.

Place the vehicle seat upon which the child seat will be installed in the upright position.

Put the safety belt in the automatic locking mode. See Step 5. This vehicle does not require the use of a locking clip.

Perform the following steps when installing the child seat with combination lap and shoulder belts:

Note: Although the child seat illustrated is a forward facing child seat, the steps are the same for installing a rear facing child seat.

Standard safety belts

image167

E142528

1.Position the child safety seat in a seat with a combination lap and shoulder belt.

image168

E142529

17

image169image170

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image171image172

Child Safety

image173

2.After positioning the child safety seat in the proper seating position, pull down on the shoulder belt and then grasp the shoulder belt and lap belt together behind the belt tongue.

image174

E142530

3.While holding the shoulder and lap belt portions together, route the tongue through the child seat according to the child seat manufacturer’s instructions. Be sure the belt webbing is not twisted.

image175

E142875

5.To put the retractor in the automatic locking mode, grasp the shoulder portion of the belt and pull downward until all of the belt is pulled out.

Note: The automatic locking mode is available on the front passenger and rear seats.

6.Allow the belt to retract to remove slack. The belt will click as it retracts to indicate it is in the automatic locking mode.

7.Try to pull the belt out of the retractor to make sure the retractor is in the automatic locking mode (you should not be able to pull more belt out). If the retractor is not locked, unbuckle the belt and repeat Steps 5 and 6.

image176

E142531

4.Insert the belt tongue into the proper buckle (the buckle closest to the direction the tongue is coming from) for that seating position until you hear a snap and feel the latch engage. Make sure the tongue is latched securely by

pulling on it.

E142533

18

image177image178

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image179image180

Child Safety

image181

8.Remove remaining slack from the belt. Force the seat down with extra weight, for example, by pressing down or kneeling on the child restraint while pulling up on the shoulder belt in order to force slack from the belt. This is necessary to remove the remaining slack that will exist once the extra weight of the child is added to the child restraint. It also helps to achieve the proper snugness of the child seat to your vehicle. Sometimes, a slight lean toward the buckle will provide extra help to remove remaining slack from the belt.

9.Attach the tether strap (if the child seat is equipped).

image182

E142534

10.Before placing the child in the seat, forcibly move the seat forward and back to make sure the seat is securely held in place. To check this, grab the seat at the belt path and attempt to move it side to side and forward and back. There should be no more than 1 inch (2.5 centimeters) of movement for proper installation.

We recommend checking with a NHTSA Certified Child Passenger Safety Technician to make certain the child restraint is properly installed. In Canada, check with Transport Canada for referral to a Child Car Seat Clinic.

Inflatable safety belts

image183

E142528

1.Position the child safety seat in a seat with a combination lap and shoulder belt.

image184

E146522

2.After positioning the child safety seat in the proper seating position, grasp the shoulder belt and lap belt together behind the belt tongue.

19

image185image186

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image187image188

Child Safety

image189image190

E142530

3.While holding the shoulder and lap belt portions together, route the tongue through the child seat according to the child seat manufacturer’s instructions. Be sure the belt webbing is not twisted.

image191

E146523

4.Insert the belt tongue into the proper buckle (the buckle closest to the direction the tongue is coming from) for that seating position until you hear a snap and feel the latch engage. Make sure the tongue is latched securely by pulling on it.

20

image192

E146524

5.To put the retractor in the automatic locking mode, grasp the lap portion of the inflatable safety belt and pull upward until all of the belt is pulled out.

Note: The automatic locking mode is available on the front passenger and rear seats.

Note: Unlike the standard safety belt, the inflatable safety belt’s unique lap portion locks the child seat for installation. The ability for the shoulder portion of the belt to move freely is normal, even after the lap belt has been put into the automatic locking mode.

Note: The lock-off device on some child restraints may not accommodate the shoulder portion of the inflatable safety belt. Follow all instructions provided by the manufacturer of the child restraint regarding the necessary and proper use of the lock-off device. In some instances, these devices have been provided only for use in vehicles with safety belt systems that would otherwise require a locking clip.

6.Allow the belt to retract to remove slack. The belt will click as it retracts to indicate it is in the automatic locking mode.

image193

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image194image195

Child Safety

image196

7.Try to pull the belt out of the retractor to make sure the retractor is in the automatic locking mode (you should not be able to pull more belt out). If the retractor is not locked, unbuckle the belt and repeat Steps 5 and 6.

image197

E142534

E146525

8.Remove remaining slack from the belt. Force the seat down with extra weight, for example, by pressing down or kneeling on the child restraint while pulling down on the lap belt in order to force slack from the belt. This is necessary to remove the remaining slack that will exist once the extra weight of the child is added to the child restraint. It also helps to achieve the proper snugness of the child seat to your vehicle. Sometimes, a slight lean toward the buckle will additionally help to remove remaining slack from the belt.

9.Attach the tether strap (if the child seat is equipped).

21

image198

10.Before placing the child in the seat, forcibly move the seat forward and back to make sure the seat is securely held in place. To check this, grab the seat at the belt path and attempt to move it side to side and forward and back. There should be no more than 1 inch (2.5 centimeters) of movement for proper installation.

We recommend checking with a NHTSA Certified Child Passenger Safety Technician to make certain the child restraint is properly installed. In Canada, check with Transport Canada for referral to a Child Car Seat Clinic.

Using Lower Anchors and Tethers for CHildren (LATCH)

WARNINGS

image199

Never attach two child safety seats to the same anchor. In a collision, one anchor may not be strong enough to

image200

hold two child safety seat attachments and may break, causing serious injury or death.

image201

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image202image203

Child Safety

image204

WARNINGS

image205

Depending on where you secure a child restraint, and depending on the child restraint design, you may block

image206

access to certain safety belt buckle assemblies or LATCH lower anchors, rendering those features potentially unusable. To avoid risk of injury, occupants should only use seating positions where they are able to be properly restrained.

image207

The LATCH system is composed of three vehicle anchor points: two lower anchors located where seat back and seat cushion meet (called the seat bight) and one top tether anchor located behind that seating position.

LATCH compatible child safety seats have two rigid or webbing mounted attachments that connect to the two lower anchors at the LATCH equipped seating positions in your vehicle. This type of attachment method eliminates the need to use safety belts to attach the child seat, however the safety belt can still be used to attach the child seat. For forward-facing child seats, the top tether strap must also be attached to the proper top tether anchor, if a top tether strap has been provided with your child seat.

image208

Your vehicle has LATCH lower anchors for child seat installation at the seating positions marked with the child seat symbol.

image209

E144054

The LATCH anchors are located at the rear section of the rear seat between the cushion and seat back below the symbols as shown. Follow the child seat manufacturer’s instructions to properly install a child seat with LATCH attachments. Follow the instructions on attaching child safety seats with tether straps.

Attach LATCH lower attachments of the child seat only to the anchors shown.

Use of Inboard Lower Anchors from the Outboard Seating Positions (Center Seating Use)

WARNING

image210

The standardized spacing for LATCH lower anchors is 11 inches (28 centimeters) center to center. Do not

image211

use LATCH lower anchors for the center

seating position unless the child seat

manufacturer’s instructions permit and

specify using anchors spaced at least as

far apart as those in this vehicle.

E142535

image212

22

image213image214

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image215image216

Child Safety

image217

The lower anchors at the center of the second row rear seat are spaced 20 inches (51 centimeters) apart. A child seat with rigid LATCH attachments cannot be installed at the center seating position. LATCH compatible child seats (with attachments on belt webbing) can only be used at this seating position provided that the child seat manufacturer’s instructions permit use with the anchor spacing stated. Do not attach a child seat to any lower anchor if an adjacent child seat is attached to that anchor.

Each time you use the safety seat, check that the seat is properly attached to the lower anchors and tether anchor, if applicable. Tug the child seat from side to side and forward and back where it is secured to your vehicle. The seat should move less than one inch when you do this for a proper installation.

If the safety seat is not anchored properly, the risk of a child being injured in a crash greatly increases.

Combining Safety Belt and LATCH Lower Anchors for Attaching Child Safety Seats

When used in combination, either the safety belt or the LATCH lower anchors may be attached first, provided a proper installation is achieved. Attach the tether strap afterward, if included with the child seat.

Using Tether Straps

Many forward-facing child safety seats include a tether strap which extends from the back of

image218

the child safety seat and hooks to an anchoring point called the top tether anchor. Tether straps are available as an accessory for many older safety seats.

23

image219

Contact the manufacturer of your child seat for information about ordering a tether strap, or to obtain a longer tether strap if the tether strap on your safety seat does not reach the appropriate top tether anchor in your vehicle.

Once the child safety seat has been installed using either the safety belt, the lower anchors of the LATCH system, or both, you can attach the top tether strap.

The tether strap anchors in your vehicle are in the following positions (shown from top view):

image220

E142537

Perform the following steps to install a child safety seat with tether anchors:

Note: If you install a child seat with rigid LATCH attachments, do not tighten the tether strap enough to lift the child seat off your vehicle seat cushion when the child is seated in it. Keep the tether strap just snug without lifting the front of the child seat. Keeping the child seat just touching your vehicle seat gives the best protection in a severe crash.

image221

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image222image223

Child Safety

image224

1.Route the child safety seat tether strap over the back of the seat. For outboard seating positions, route the tether strap under the head restraint and between the head restraint posts. For the center seating positions, route the tether strap over the top of the head restraint. If needed, the head restraints can also be removed.

image225

E193589

2.Locate the correct anchor for the selected seating position.

image226

BOOSTER SEATS

WARNING

image227

Never place, or allow a child to place, the shoulder belt under a child’s arm or behind the back because it

image228

reduces the protection for the upper part of the body and may increase the risk of injury or death in a crash.

image229

Note: Some booster seat safety belt guides may not accommodate the shoulder portion of the inflatable safety belt.

Use a belt-positioning booster seat for children who have outgrown or no longer properly fit in a child safety seat (generally children who are less than 4 feet 9 inches (1.45 meters) tall, are greater than age four

(4)and less than age twelve (12), and between 40 pounds (18 kilograms) and 80 pounds (36 kilograms) and upward to 100 pounds (45 kilograms) if recommended by your child restraint manufacturer). Many state and provincial laws require that children use approved booster seats until they reach age eight, a height of 4 feet 9 inches (1.45 meters) tall, or 80 pounds (36 kilograms).

Booster seats should be used until you can answer YES to ALL of these questions when seated without a booster seat:

image230

E142539

3.Clip the tether strap to the anchor as shown.

4.Tighten the child safety seat tether strap according to the manufacturer’s instructions.

If your child restraint system is equipped with a tether strap, and the child restraint manufacturer recommends its use, Ford also recommends its use.

image231

E142595

24

image232

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image233image234

Child Safety

image235

  Can the child sit all the way back against their vehicle seat back with knees bent comfortably at the edge of the seat cushion?

image236

  Can the child sit without slouching?

  Does the lap belt rest low across the hips?

  Is the shoulder belt centered on the shoulder and chest?

  Can the child stay seated like this for

the whole trip?

E70710

Always use booster seats in conjunction with your vehicle lap and shoulder belt.

Types of Booster Seats

image237

E68924

Backless booster seats

If your backless booster seat has a removable shield, remove the shield. If a vehicle seating position has a low seat back or no head restraint, a backless booster seat may place your child’s head (as measured at the tops of the ears) above the top of the seat. In this case, move the backless booster to another seating position with a higher seat back or head restraint and lap and shoulder belts, or consider using a high back booster seat.

25

image238

High back booster seats

If, with a backless booster seat, you cannot find a seating position that adequately supports your child’s head, a high back booster seat would be a better choice.

Children and booster seats vary in size and shape. Choose a booster that keeps the lap belt low and snug across the hips, never up across the stomach, and lets you adjust the shoulder belt to cross the chest and rest snugly near the center of the shoulder. The following drawings compare the ideal fit (center) to a shoulder belt uncomfortably close to the neck and a shoulder belt that could slip off the shoulder. The drawings also show how the lap belt should be low and snug across the child’s hips.

image239

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image240image241

Child Safety

image242image243

E142596

image244

E142597

If the booster seat slides on the vehicle seat upon which it is being used, placing a rubberized mesh sold as shelf or carpet liner under the booster seat may improve this condition. Do not introduce any item thicker than this under the booster seat. Check with the booster seat manufacturer’s instructions.

CHILD RESTRAINT POSITIONING

WARNINGS

image245

Airbags can kill or injure a child in a child seat. Never place a rear-facing child seat in front of an active airbag.

image246

If you must use a forward-facing child seat in the front seat, move the vehicle seat upon which the child seat is installed all

26

image247

WARNINGS

image248

the way back. When possible, all children age 12 and under should be properly restrained in a rear seating position. If all children cannot be seated and restrained properly in a rear seating position, properly restrain the largest child in the front seat.

Always carefully follow the instructions and warnings provided by the manufacturer of any child

image249

restraint to determine if the restraint device is appropriate for your child’s size, height, weight, or age. Follow the child restraint manufacturer’s instructions and warnings provided for installation and use in conjunction with the instructions and warnings provided by your vehicle

image250

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image251image252

Child Safety

image253

WARNINGS  WARNINGS

image254

manufacturer. A safety seat that is improperly installed or utilized, is inappropriate for your child’s height, age, or weight or does not properly fit the child may increase the risk of serious injury or death.

Never let a passenger hold a child on his or her lap while your vehicle is moving. The passenger cannot

image255

protect the child from injury in a crash, which may result in serious injury or death.

Never use pillows, books, or towels to boost a child. They can slide around and increase the likelihood

image256

of injury or death in a crash.

Always restrain an unoccupied child seat or booster seat. These objects may become projectiles in a crash or

image257

sudden stop, which may increase the risk of serious injury.

Never place, or allow a child to place, the shoulder belt under a child’s arm or behind the back because it

image258

reduces the protection for the upper part of the body and may increase the risk of injury or death in a crash.

To avoid risk of injury, do not leave children or pets unattended in your vehicle.

image259image260

Recommendations for attaching child safety restraints for children

image261

Use any attachment method as indicated below by X

Combined

LATCH

LATCH

Safety belt

Safety belt

Safety belt

(lower

(lower

and top

and LATCH

only

Restraint

weight of

anchors

anchors

tether

(lower

Type

child and

and top

only)

anchor

anchors

child seat

tether

and top

anchor)

tether

anchor)

Rear facing

Up to 65 lb

X

X

child seat

(29.5 kg)

Rear facing

Over 65 lb

X

child seat

(29.5 kg)

Forward

Up to 65 lb

X

X

X

facing

(29.5 kg)

child seat

Forward

Over 65 lb

X

X

facing

(29.5 kg)

child seat

Note: The child seat must rest tightly

CHILD SAFETY LOCKS

against the vehicle seat upon which it is

installed. It may be necessary to lift or

remove the head restraint. See Seats (page

When these locks are set, the rear doors

132).

cannot be opened from the inside.

27

image262image263

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image264image265

Child Safety

image266image267

E112197

The childproof locks are located on the rear edge of each rear door and must be set separately for each door.

Left-Hand Side

Turn counterclockwise to lock and

clockwise to unlock.

Right-Hand Side

Turn clockwise to lock and

counterclockwise to unlock.

28

image268image269

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image270image271

Seatbelts

image272

PRINCIPLE OF OPERATION

WARNINGS

image273

Always drive and ride with your seatback upright and the lap belt snug and low across the hips.

image274

To reduce the risk of injury, make sure children sit where they can be properly restrained.

image275

Never let a passenger hold a child on his or her lap while your vehicle is moving. The passenger cannot

image276

protect the child from injury in a crash.

All occupants of your vehicle, including the driver, should always properly wear their safety belts, even

image277

when an airbag supplemental restraint system is provided. Failure to properly wear your safety belt could seriously increase the risk of injury or death.

It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a crash, people riding in

image278

these areas are more likely to be seriously injured or killed. Do not allow people to ride in any area of your vehicle that is not equipped with seats and safety belts. Be sure everyone in your vehicle is in a seat and using a safety belt properly.

In a rollover crash, an unbelted person is significantly more likely to die than a person wearing a safety

image279

belt.

Each seating position in your vehicle has a specific safety belt assembly which is made up of one buckle and

image280

one tongue that are designed to be used as a pair. 1) Use the shoulder belt on the outside shoulder only. Never wear the shoulder belt under the arm. 2) Never swing the safety belt around your neck over the inside shoulder. 3) Never use a single belt for more than one person.

29

image281

WARNINGS

image282

When possible, all children 12 years old and under should be properly restrained in a rear seating position.

image283

Failure to follow this could seriously increase the risk of injury or death.

Safety belts and seats can become hot in a vehicle that has been closed up in sunny weather; they could burn

image284

a small child. Check seat covers and buckles before you place a child anywhere near them.

Front and rear seat occupants, including pregnant women, should wear safety belts for optimum

image285

protection in an accident.

image286

All seating positions in your vehicle have lap and shoulder safety belts. All occupants of the vehicle should always properly wear their safety belts, even when an airbag supplemental restraint system is provided.

The safety belt system consists of:

Lap and shoulder safety belts.

Shoulder safety belt with automatic locking mode, (except driver safety belt).

Height adjuster at the front outboard seating positions.

Safety belt pretensioner at the front outboard seating positions.

Belt tension sensor at the front outboard passenger seating position.

Safety belt warning light and chime.

Crash sensors and monitoring system with readiness indicator.

image287image288image289

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image290image291

Seatbelts

image292

The safety belt pretensioners at the front seating positions are designed to tighten the safety belts when activated. In frontal and near-frontal crashes, the safety belt pretensioners may be activated alone or, if the crash is of sufficient severity, together with the front airbags. The pretensioners may also activate when a Safety Canopy airbag is deployed.

FASTENING THE SEATBELTS

Standard belts shown, inflatable belts similar

The front outboard and rear safety restraints in the vehicle are combination lap and shoulder belts.

image293

E142587

1.Insert the belt tongue into the proper buckle (the buckle closest to the direction the tongue is coming from) until you hear a snap and feel it latch. Make sure you securely fasten the tongue in the buckle.

image294

E142588

image295

2.To unfasten, press the release button and remove the tongue from the buckle.

Using the Sliding Clip (If Equipped)

image296

E200788

Slide the clip away from the tongue so there is no loose webbing when an occupant or child seat is buckled up. You can also use the sliding clip to raise the tongue and prevent it from rattling or to ease access to the tongue.

30

image297

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image298image299

Seatbelts

image300

Using Safety Belts During Pregnancy

WARNING

image301

Always ride and drive with your seatback upright and the safety belt properly fastened. The lap portion of

image302

the safety belt should fit snug and be positioned low across the hips. The shoulder portion of the safety belt should be positioned across the chest. Pregnant women should also follow this practice. See the following figure.

image303

E142590

Pregnant women should always wear their safety belt. The lap belt portion of a combination lap and shoulder belt should be positioned low across the hips below the belly and worn as tight as comfort will allow. The shoulder belt should be positioned to cross the middle of the shoulder and the center of the chest.

Safety Belt Locking Modes

WARNINGS

image304

After any vehicle crash, the safety belt system at all passenger seating positions must be checked by an

image305

authorized dealer to verify that the automatic locking retractor feature for child seats is still functioning properly. In addition, all safety belts should be checked for proper function.

31

image306

WARNINGS

image307

Belt and retractor assembly must be replaced if the safety belt assembly automatic locking retractor feature

image308

or any other safety belt function is not operating properly when checked by an authorized dealer. Failure to replace the belt and retractor assembly could increase the risk of injury in crashes.

image309

All safety restraints in the vehicle are combination lap and shoulder belts. The driver safety belt has the vehicle sensitive locking mode. The front outboard passenger and rear seat safety belts have both the vehicle sensitive locking mode and the automatic locking mode.

Vehicle Sensitive Mode

This is the normal retractor mode, which allows free shoulder belt length adjustment to your movements and locking in response to vehicle movement. For example, if the driver brakes suddenly or turns a corner sharply, or the vehicle receives an impact of about 5 mph

(8 km/h) or more, the combination safety belts will lock to help reduce forward movement of the driver and passengers.

In addition, the retractor is designed to lock if the webbing is pulled out too quickly. If this occurs, let the belt retract slightly and pull webbing out again in a slow and controlled manner.

Automatic Locking Mode

In this mode, the shoulder belt is automatically pre-locked. The belt will still retract to remove any slack in the shoulder belt. The automatic locking mode is not available on the driver safety belt.

image310

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image311image312

Seatbelts

image313

When to Use the Automatic Locking Mode

image314

This mode should be used any time a child safety seat, except a booster, is installed in passenger front or rear seating positions. Children 12 years old and under should be properly restrained in a rear seating position whenever possible. See Child Safety (page 15).

How to Use the Automatic Locking Mode

Non-inflatable safety belts

E146363

E142591

image315

1.Buckle the combination lap and shoulder belt.

2.Grasp the shoulder portion and pull downward until the entire belt is pulled out. As the belt retracts, you will hear a clicking sound. This indicates the safety belt is now in the automatic locking mode.

Rear outboard inflatable safety belts (second row only–if equipped)

1.Buckle the combination lap and shoulder belt.

2.Grasp the lap portion of the belt and pull upward until the entire belt is pulled out.

3.Allow the belt to retract. As the belt retracts, you will hear a clicking sound. This indicates the safety belt is now in the automatic locking mode.

How to Disengage the Automatic Locking Mode

Unbuckle the combination lap and shoulder belt and allow it to retract completely to disengage the automatic locking mode and activate the vehicle sensitive (emergency) locking mode.

Rear Inflatable Safety Belt (If

Equipped)

WARNING

image316

Do not attempt to service, repair, or modify the rear inflatable safety belt.

image317image318

The rear inflatable safety belts are fitted in the shoulder portion of the safety belts of the second-row outboard seating positions.

32

image319image320

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image321image322

Seatbelts

image323

Note: The rear inflatable safety belts are compatible with most infant and child safety car seats and belt positioning booster seats when properly installed. This is because they are designed to fill with a cooled gas at a lower pressure and at a slower rate than traditional airbags. After inflation, the shoulder portion of the safety belt remains cool to the touch.

The rear inflatable safety belt consists of the following:

An inflatable bag located in the shoulder safety belt webbing.

Lap safety belt webbing with automatic locking mode.

The same warning light, electronic control and diagnostic unit as used for the front safety belts.

Impact sensors located in various parts of the vehicle.

How does the rear inflatable safety belt system work?

The rear inflatable safety belts will function like standard restraints in everyday usage.

image324

E146364

During a crash of sufficient force, the inflatable belt will inflate from inside the webbing.

E146365

image325

The fully inflated belt’s increased diameter more effectively holds the occupant in the appropriate seating position, and spreads crash forces over more area of the body than regular safety belts. This helps reduce pressure on the chest and helps control head and neck motion for passengers.

WARNING

image326

If the rear inflatable safety belt has

image327

deployed, it will not function again.

The rear inflatable safety belt system

must be replaced by an authorized dealer.

image328

The rear inflatable safety belts are designed to inflate in frontal or near-frontal crashes and some side impact crashes and rollovers. The fact that the rear inflatable safety belt did not inflate in a crash does not mean that something is wrong with the system. Rather, it means the forces were not of the type sufficient to cause activation.

Safety Belt Extension Assembly

WARNINGS

image329

Do not use extensions to change the fit of the shoulder belt across the torso.

image330

Do not use extensions with an inflatable safety belt.

image331image332

33

image333image334

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image335image336

Seatbelts

image337

If the safety belt is too short when fully extended, a safety belt extension assembly can be obtained from an authorized dealer.

Use only extensions manufactured by the same supplier as the safety belt. Manufacturer identification is on a label located either at the end of the webbing or on the retractor behind the trim. Also, use the safety belt extension only if the safety belt is too short for you when fully extended.

SEATBELT HEIGHT ADJUSTMENT

WARNING

image338

Position the safety belt height adjuster so that the belt rests across the middle of your shoulder. Failure

image339

to adjust the safety belt properly could reduce the effectiveness of the safety belt and increase the risk of injury in a crash.

image340

Adjust the height of the shoulder belt so the belt rests across the middle of your shoulder.

E145664

image341

To adjust the shoulder belt height:

1.Pull the button and slide the height adjuster up or down.

2.Release the button and pull down on the height adjuster to make sure it is locked in place.

SEATBELT WARNING LAMP AND INDICATOR CHIME

This lamp illuminates and an audible warning will sound if the driver’s safety belt has not been

image342

fastened when the vehicle’s ignition is turned on.

Conditions of operation

image343

If…

Then…

The driver’s safety belt is not buckled

The safety belt warning light illuminates 1-

before the ignition switch is turned to the

2 minutes and the warning chime sounds

on position…

4-8 seconds.

The driver’s safety belt is buckled while the

The safety belt warning light and warning

indicator light is illuminated and the

chime turn off.

warning chime is sounding…

The driver’s safety belt is buckled before

The safety belt warning light and indicator

the ignition switch is turned to the on posi-

chime remain off.

tion…

34

image344image345

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image346image347

Seatbelts

image348

SEATBELT REMINDER

Belt-Minder™

This feature supplements the safety belt warning function by providing additional reminders that intermittently sound a tone and illuminate the safety belt warning light when you are in the driver seat or you have a front seat passenger and a safety belt is unbuckled.

image349

The system uses information from the front passenger sensing system to determine if a front seat passenger is present and therefore potentially in need of a warning. To avoid the system turning on the Belt-Minder feature for objects you place on the front passenger seat, only the front seat passengers receive warnings as determined by the front passenger sensing system.

If the Belt-Minder warnings expire (warnings for about five minutes) for one passenger (driver or front passenger), the other passenger can still cause the Belt-Minder feature to turn on.

If…  Then…

You and the front seat passenger buckle your safety belts before you switch the ignition on or less than 1–2 minutes elapse after you switch the ignition on…

You or the front seat passenger do not buckle your safety belts before your vehicle reaches at least 6 mph (9.7 km/h) and 1–2 minutes elapse after you switch the ignition on…

The safety belt for the driver or front passenger is unbuckled for about 1 minute while the vehicle is traveling at least 6 mph (9.7 km/h) and more than 1–2 minutes elapse after you switch the ignition on…

The Belt-Minder feature will not activate.

The Belt-Minder feature activates, the safety belt warning light illuminates and a warning tone sounds for 6 seconds every 25 seconds, repeating for about 5 minutes or until you and the front seat passenger buckle your safety belts.

The Belt-Minder feature activates, the safety belt warning light illuminates and a warning tone sounds for 6 seconds every 25 seconds, repeating for about 5 minutes or until you and the front seat passenger buckle your safety belts.

35

image350image351

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image352image353

Seatbelts

image354

Deactivating and Activating the Belt-Minder Feature

WARNING

image355

While the system allows you to switch this feature off, the intent of the system is to remind you to wear

image356

your safety belt to improve your chance to survive an accident. We recommend you leave the system switched on for yourself and others who may use the vehicle.

image357

Note: The driver and front passenger warnings switch on and off independently. When you perform this procedure for one seating position, do not buckle the other position as this will terminate the process.

Read Steps 1–4 thoroughly before proceeding with the programming procedure.

Before following the procedure, make sure that:

The parking brake is set.

The transmission is in park (P) or neutral (N).

The ignition is off.

The driver and front passenger safety belts are unbuckled.

1.Switch the ignition on. Do not start the vehicle.

2.Wait until the safety belt warning light turns off (about 1 minute). After Step 2, wait an additional 5 seconds before proceeding with Step 3. Once you start Step 3, you must complete the procedure within 30 seconds.

3.For the seating position you are switching off, buckle then unbuckle the safety belt three times at a moderate speed, ending in the unbuckled state. After Step 3, the safety belt warning light turns on.

4.While the safety belt warning light is on, buckle and then unbuckle the safety belt. After Step 4, the safety belt warning light flashes for confirmation.

This will switch the feature off for that seating position if it is currently on.

This will switch the feature on for that seating position if it is currently off.

CHILD RESTRAINT AND SEATBELT MAINTENANCE

Inspect the vehicle safety belts and child safety seat systems periodically to make sure they work properly and are not damaged. Inspect the vehicle and child seat safety belts to make sure there are no nicks, tears or cuts. Replace if necessary. All vehicle safety belt assemblies, including retractors, buckles, front safety belt buckle assemblies, buckle support assemblies (slide bar-if equipped), shoulder belt height adjusters (if equipped), shoulder belt guide on seat back (if equipped), child safety seat LATCH and tether anchors, and attaching hardware, should be inspected after a crash. Read the child restraint manufacturer’s instructions for additional inspection and maintenance information specific to the child restraint.

Ford Motor Company recommends that all safety belt assemblies in use in vehicles involved in a crash be replaced. However, if the crash was minor and an authorized dealer finds that the belts do not show damage and continue to operate properly, they do not need to be replaced. Safety belt assemblies not in use during a crash should also be inspected and replaced if either damage or improper operation is noted.

Properly care for safety belts. See Vehicle Care (page 283).

36

image358image359

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image360image361

Personal Safety System™

image362

The Personal Safety System provides an improved overall level of frontal crash protection to front seat occupants and is designed to help further reduce the risk of airbag-related injuries. The system is able to analyze different occupant conditions and crash severity before activating the appropriate safety devices to help better protect a range of occupants in a variety of frontal crash situations.

The Vehicle Personal Safety System consists of:

Driver and passenger dual-stage airbag supplemental restraints.

Front seat outboard safety belts with pretensioners, energy management retractors and safety belt usage sensors.

Driver seat position sensor.

Front passenger sensing system.

Passenger airbag off and on indicator lamp.

Front crash severity sensors.

Restraints control module with impact and safing sensors.

Restraint system warning light and backup tone.

The electrical wiring for the airbags, crash sensors, safety belt pretensioners, front safety belt usage sensors, driver seat position sensor, front passenger sensing system and indicator lights.

37

image363

How Does the Personal Safety System Work?

The Personal Safety System can adapt the deployment strategy of the safety devices according to crash severity and occupant conditions. A collection of crash and occupant sensors provides information to the restraints control module. During a crash, the restraints control module may deploy the safety belt pretensioners, one or both stages of the dual-stage airbags based on crash severity and occupant conditions.

image364

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image365image366

Supplementary Restraints System

image367

PRINCIPLE OF OPERATION

WARNINGS

image368

Airbags do not inflate slowly or gently, and the risk of injury from a deploying airbag is the greatest close

image369

to the trim covering the airbag module.

All occupants of your vehicle, including the driver, should always properly wear their safety belts, even

image370

when an airbag supplemental restraint system is provided. Failure to properly wear your safety belt could seriously increase the risk of injury or death.

Always transport children 12 years old and under in the back seat and always properly use appropriate

image371

child restraints. Failure to follow this could seriously increase the risk of injury or death.

Never place your arm over the airbag module as a deploying airbag can result in serious arm fractures or

image372

other injuries.

Airbags can kill or injure a child in a child seat. Never place a rear-facing child seat in front of an active airbag.

image373

If you must use a forward-facing child seat in the front seat, move the seat upon which the child seat is installed all the way back.

Do not attempt to service, repair, or modify the airbag supplemental restraint systems or its fuses as you

image374

could be seriously injured or killed. Contact your authorized dealer as soon as possible.

Several airbag system components get hot after inflation. To reduce the risk of injury, do not touch them after

image375

inflation.

If the airbag has deployed, the airbag will not function again and must be replaced immediately. If the airbag

image376

is not replaced, the unrepaired area will increase the risk of injury in a crash.

image377

38

image378

The airbags are a supplemental restraint system and are designed to work with the safety belts to help protect the driver and right front passenger from certain upper body injuries. Airbags do not inflate slowly; there is a risk of injury from a deploying airbag.

Note: You will hear a loud bang and see a cloud of harmless powdery residue if an airbag deploys. This is normal.

The airbags inflate and deflate rapidly upon activation. After airbag deployment, it is normal to notice a smoke-like, powdery residue or smell the burnt propellant. This may consist of cornstarch, talcum powder (to lubricate the bag) or sodium compounds (for example, baking soda) that result from the combustion process that inflates the airbag. Small amounts of sodium hydroxide may be present which may irritate the skin and eyes, but none of the residue is toxic.

While the system is designed to help reduce serious injuries, contact with a deploying airbag may also cause abrasions or swelling. Temporary hearing loss is also a possibility as a result of the noise associated with a deploying airbag. Because airbags must inflate rapidly and with considerable force, there is the risk of death or serious injuries such as fractures, facial and eye injuries or internal injuries, particularly to occupants who are not properly restrained or are otherwise out of position at the time of airbag deployment. Thus, it is extremely important that occupants be properly restrained as far away from the airbag module as possible while maintaining vehicle control.

Routine maintenance of the airbags is not required.

image379

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image380image381

Supplementary Restraints System

image382

DRIVER AND PASSENGER

Proper Driver and Front Passenger

AIRBAGS

Seating Adjustment

image383

WARNINGS

image384

Never place your arm or any objects over an airbag module. Placing your arm over a deploying airbag can

image385

result in serious arm fractures or other injuries. Objects placed on or over the airbag inflation area may cause those objects to be propelled by the airbag into your face and torso causing serious injury.

Airbags can kill or injure a child in a child seat. Never place a rear-facing child seat in front of an active airbag.

image386

If you must use a forward-facing child seat in the front seat, move the seat upon which the child seat is installed all the way back.

image387image388

E151127

The driver and front passenger airbags will deploy during significant frontal and near frontal crashes.

The driver and passenger front airbag system consists of:

Driver and passenger airbag modules.

Front passenger sensing system.

· Crash sensors and monitoring system with readiness indicator.

image389

See Crash Sensors and Airbag Indicator (page 45).

39

image390

WARNING

National Highway Traffic Safety Administration (NHTSA) recommends a minimum distance

image391

of at least 10 inches (25 centimeters) between an occupant’s chest and the driver airbag module.

image392

To properly position yourself away from the airbag:

Move your seat to the rear as far as you can while still reaching the pedals comfortably.

Recline the seat slightly (one or two degrees) from the upright position.

After all occupants have adjusted their seats and put on safety belts, it is very important that they continue to sit properly. A properly seated occupant sits upright, leaning against the seat back, and centered on the seat cushion, with their feet comfortably extended on the floor. Sitting improperly can increase the chance of injury in a crash event. For example, if an occupant slouches, lies down, turns sideways, sits forward, leans forward or sideways, or puts one or both feet up, the chance of injury during a crash is greatly increased.

Children and Airbags

WARNING

image393

Airbags can kill or injure a child in a child seat. Never place a rear-facing child seat in front of an active airbag.

image394

If you must use a forward-facing child seat in the front seat, move the seat upon which the child seat is installed all the way back.

image395image396

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image397image398

Supplementary Restraints System

image399

This system works with sensors that are part of the front passenger’s seat and safety belt to detect the presence of a properly-seated occupant and determine if the front passenger’s frontal airbag should be enabled (may inflate) or not.

image400

E142846

Children must always be properly restrained. Accident statistics suggest that children are safer when properly restrained in the rear seating positions than in the front seating position. Failure to follow these instructions may increase the risk of injury in a crash.

E196510

The front passenger sensing system uses a passenger airbag status indicator that will illuminate indicating that the front passenger frontal airbag is either ON (enabled) or OFF (disabled).

FRONT PASSENGER SENSING SYSTEM

WARNINGS

image401

Even with Advanced Restraints Systems, children 12 and under should be properly restrained in a

image402

rear seating position. Failure to follow this could seriously increase the risk of injury or death.

Sitting improperly out of position or with the seatback reclined too far can take off weight from the seat

image403

cushion and affect the decision of the front passenger sensing system, resulting in serious injury or death in a crash. Always sit upright against your seat back, with your feet on the floor.

Any alteration or modification to the front passenger seat may affect the performance of the front passenger

image404

sensing system.

image405

40

image406

The indicator lamp is located at the top center of the instrument panel.

Note: The passenger airbag status indicator OFF and ON indicator lamps will illuminate for a short period of time when the ignition is first turned on to confirm it is functional.

The front passenger sensing system is designed to disable (will not inflate) the front passenger’s frontal airbag when a rear facing infant seat, a forward-facing child restraint, or a booster seat is detected. Even with this technology, parents are strongly encouraged to always properly restrain children in the rear seat. The sensor also turns off the passenger front airbag and seat-mounted side airbag when the passenger seat is empty.

image407

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image408image409

Supplementary Restraints System

image410

When the front passenger sensing system disables (will not inflate) the front passenger frontal airbag, the passenger airbag status indicator will illuminate the OFF lamp and stay lit to remind you that the front passenger frontal airbag is disabled.

If the child restraint has been installed and the passenger airbag status indicator illuminates the ON lamp, then turn the vehicle off, remove the child restraint from the vehicle and reinstall the restraint following the child restraint manufacturer’s instructions.

The front passenger sensing system is designed to enable (may inflate) the front passenger’s frontal airbag anytime the system senses that a person of adult size is sitting properly in the front passenger seat.

image411

When the front passenger sensing system enables the front passenger frontal airbag (may inflate), the passenger airbag status indicator will illuminate the ON lamp and remain illuminated.

If a person of adult size is sitting in the front passenger ’s seat, but the airbag off indicator lamp is lit, it is possible that the person is not sitting properly in the seat. If this happens:

Turn the vehicle off and ask the person to place the seatback in the full upright position.

Have the person sit upright in the seat, centered on the seat cushion, with the person’s legs comfortably extended.

Restart the vehicle and have the person remain in this position for about two minutes. This will allow the system to detect that person and enable the passenger’s frontal airbag.

If the indicator OFF lamp remains lit even after this, the person should be advised to ride in the rear seat.

Occupant

Passenger airbag status

Passenger airbag

indicator

Empty

OFF: Lit

Disabled

ON: Unlit

Child

OFF: Lit

Disabled

ON: Unlit

Adult

OFF: Unlit

Enabled

ON: Lit

Note: When the passenger airbag status indicator OFF off light is illuminated, the passenger (seat mounted) side airbag may be disabled to avoid the risk of airbag deployment injuries.

After all occupants have adjusted their seats and put on safety belts, it is very important that they continue to sit properly. A properly seated occupant sits upright, leaning against the seatback, and centered on the seat cushion, with their

41

image412image413

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image414image415

Supplementary Restraints System

image416

feet comfortably extended on the floor. Sitting improperly can increase the chance of injury in a crash event. For example, if an occupant slouches, lies down, turns sideways, sits forward, leans forward or sideways, or puts one or both feet up, the chance of injury during a crash is greatly increased.

If you think that the status of the passenger airbag off indicator lamp is incorrect, check for the following:

Objects lodged underneath the seat

Objects between the seat cushion and the center console

Objects hanging off the seat back

Objects stowed in the seat back map pocket

Objects placed on the occupant’s lap

Cargo interference with the seat

Other passengers pushing or pulling on the seat

Rear passenger feet and knees resting or pushing on the seat

The conditions listed above may cause the weight of a properly seated occupant to be incorrectly interpreted by the front passenger sensing system. The person in the front passenger seat may appear heavier or lighter due to the conditions described in the list above.

Make sure the front passenger sensing system is operating properly. See Crash Sensors

image417

and Airbag Indicator (page 45).

If the airbag readiness light is lit, do the following:

The driver and adult passengers should check for objects lodged underneath the front passenger seat, or cargo interfering with the seat.

42

image418

If there are lodged objects, or cargo is interfering with the seat, take the following steps to remove the obstruction:

Pull the vehicle over.

Turn the vehicle off.

Driver and adult passengers should check for any objects lodged underneath the front passenger seat or cargo interfering with the seat.

Remove the obstruction(s) (if found).

Restart the vehicle.

Wait at least two minutes and verify that the airbag readiness light is no longer illuminated.

If the airbag readiness light remains illuminated, this may or may not be a problem due to the front passenger sensing system.

Do not attempt to repair or service the system. Take your vehicle immediately to an authorized dealer.

If it is necessary to modify an advanced front airbag system to accommodate a person with disabilities, contact the Ford Customer Relationship Center. See Getting the Services You Need (page 243).

SIDE AIRBAGS

WARNINGS

image419

Do not place objects or mount equipment on or near the airbag cover, on the side of the seatbacks

image420

(of the front seats), or in front seat areas that may come into contact with a deploying airbag. Failure to follow these instructions may increase the risk of personal injury in the event of a crash.

image421

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image422image423

Supplementary Restraints System

image424

WARNINGS

image425

Do not use accessory seat covers. The use of accessory seat covers may prevent the deployment of the

image426

side airbags and increase the risk of injury in an accident.

Do not lean your head on the door. The side airbag could injure you as it deploys from the side of the

image427

seatback.

Do not attempt to service, repair, or modify the airbag, its fuses or the seat cover on a seat containing an

image428

airbag as you could be seriously injured or killed. Contact your authorized dealer as soon as possible.

If the side airbag has deployed, the airbag will not function again. The side airbag system (including the

image429

seat) must be inspected and serviced by an authorized dealer. If the airbag is not replaced, the unrepaired area will increase the risk of injury in a crash.

image430

The side airbags are located on the outboard side of the seatbacks of the front seats. In certain sideways crashes, the airbag on the side affected by the crash will be inflated. The airbag was designed to inflate between the door panel and occupant to further enhance the protection provided occupants in side impact crashes.

image431

E152533

The system consists of the following:

A label or embossed side panel indicating that side airbags are fitted to your vehicle.

Side airbags located inside the driver and front passenger seatbacks.

Front passenger sensing system.

Crash sensors and monitoring system with readiness indicator. See Crash Sensors and Airbag Indicator (page 45).

image432

Note: The passenger sensing system will deactivate the passenger seat-mounted side airbag if it detects an empty passenger seat.

The design and development of the side airbag system included recommended testing procedures that were developed by a group of automotive safety experts known as the Side Airbag Technical Working Group. These recommended testing procedures help reduce the risk of injuries related to the deployment of side airbags.

DRIVER AND PASSENGER KNEE AIRBAGS

WARNINGS

image433

Keep the glove box door closed while driving for optimal performance of the passenger knee airbag during a

image434

crash.

To reduce risk of injury, do not obstruct or place objects in the deployment path of the knee airbag.

image435image436

43

image437image438

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image439image440

Supplementary Restraints System

image441

A driver knee airbag is located under or within the instrument panel. A passenger knee airbag is located within the glove box door. During a crash, the restraints control module may activate the driver and passenger knee airbags based on crash severity and occupant conditions. Under certain crash and occupant conditions, the driver and passenger knee airbag may deploy but the driver front airbag may not activate. As with front and side airbags, it is important to be properly seated and restrained to reduce the risk of death or serious injury.

Make sure the knee airbags are operating properly. See Crash

image442

Sensors and Airbag Indicator (page 45).

SAFETY CANOPY™

WARNINGS

image443

Do not place objects or mount equipment on or near the headliner at the siderail that may come into

image444

contact with a deploying curtain airbag. Failure to follow these instructions may increase the risk of personal injury in the event of a crash.

Do not lean your head on the door. The curtain airbag could injure you as it deploys from the headliner.

image445

Do not attempt to service, repair, or modify the curtain airbags, its fuses, the A, B, or C pillar trim, or the

image446

headliner on a vehicle containing curtain airbags as you could be seriously injured or killed. Contact your authorized dealer as soon as possible.

44

image447

WARNINGS

image448

All occupants of your vehicle including the driver should always wear their safety belts even when an

image449

airbag supplemental restraint system and curtain airbag is provided. Failure to properly wear your safety belt could seriously increase the risk of injury or death.

To reduce risk of injury, do not obstruct or place objects in the deployment path of the curtain

image450

airbag.

If the curtain airbags have deployed, the curtain airbags will not function again. The curtain airbags (including

image451

the A, B and C pillar trim and headliner) must be inspected and serviced by an authorized dealer. If the curtain airbag is not replaced, the unrepaired area will increase the risk of injury in a crash.

image452

The Safety Canopy will deploy during significant side crashes or when a certain likelihood of a rollover event is detected by the rollover sensor. The Safety Canopy is mounted to the roof side-rail sheet metal, behind the headliner, above each row of seats. In certain sideways crashes or rollover events, the Safety Canopy will be activated, regardless of which seats are occupied. The Safety Canopy is designed to inflate between the side window area and occupants to further enhance protection provided in side impact crashes and rollover events.

image453

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image454image455

Supplementary Restraints System

image456

CRASH SENSORS AND AIRBAG INDICATOR

image457

WARNING

image458

Modifying or adding equipment to the front end of the vehicle (including frame, bumper, front end body

image459

structure and tow hooks) may affect the performance of the airbag system, increasing the risk of injury. Do not modify the front end of the vehicle.

image460

E75004

The system consists of the following:

Safety canopy curtain airbags located above the trim panels over the front and rear side windows identified by a label or wording on the headliner or roof-pillar trim.

A flexible headliner which opens above the side doors to allow air curtain deployment

· Crash sensors and monitoring system with a readiness indicator. See Crash Sensors

image461

and Airbag Indicator (page 45).

Children 12 years old and under should always be properly restrained in the rear seats. The Safety Canopy will not interfere with children restrained using a properly installed child or booster seat because it is designed to inflate downward from the headliner above the doors along the side window opening.

The design and development of the Safety Canopy included recommended testing procedures that were developed by a group of automotive safety experts known as the Side Airbag Technical Working Group. These recommended testing procedures help reduce the risk of injuries related to the deployment of side airbags (including the Safety Canopy).

45

image462

Your vehicle has a collection of crash and occupant sensors which provide information to the restraints control module. The restraints control module deploys (activates) the front safety belt pretensioners, driver airbag, passenger airbag, knee airbag(s), seat mounted side airbags, the Safety Canopy and optional rear inflatable safety belts. Based on the type of crash (frontal impact or side impact), the restraints control module will deploy the appropriate safety devices.

The restraints control module also monitors the readiness of the above safety devices plus the crash and occupant sensors. The readiness of the safety system is indicated by a warning indicator light in the instrument cluster or by a backup tone if the warning light is not working. Routine maintenance of the airbag is not required.

A difficulty with the system is indicated by one or more of the following:

image463

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image464image465

Supplementary Restraints System

image466

The readiness light will not illuminate immediately after the ignition is turned on.

The readiness light will either flash or stay lit.

A series of five beeps will be heard. The tone pattern will repeat periodically until the problem, the light or both are repaired.

image467

If any of these things happen, even intermittently, have the supplemental restraint system serviced at an authorized dealer immediately. Unless serviced, the system may not function properly in the event of a crash.

The safety belt pretensioners and the front airbag supplemental restraint system are designed to activate when the vehicle sustains frontal deceleration sufficient to cause the restraints control module to deploy a safety device.

The fact that the safety belt pretensioners or front airbags did not activate for both front seat occupants in a crash does not mean that something is wrong with the system. Rather, it means the restraints control module determined the accident conditions (crash severity, belt usage) were not appropriate to activate these safety devices.

The design of the front airbags is to activate only in frontal and near-frontal crashes (not rollovers, side impacts or rear impacts) unless the crash causes sufficient frontal deceleration.

The design of the safety belt pretensioners and optional rear inflatable safety belts is to activate in frontal, near-frontal and side crashes, and in rollovers.

46

image468

The knee airbag(s) may deploy based on crash severity and occupant conditions.

The design of the side airbags is to inflate in certain side impact crashes. Side airbags may activate in other types of crashes if the vehicles experiences sufficient sideways motion or deformation.

The design of the Safety Canopy is to inflate in certain side impact crashes or rollover events. The Safety Canopy may activate in other types of crashes if the vehicle experiences sufficient sideways motion or deformation, or a certain likelihood of rollover.

AIRBAG DISPOSAL

Contact your authorized dealer as soon as possible. Airbags must be disposed of by qualified personnel.

image469

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image470image471

Keys and Remote Controls

image472

GENERAL INFORMATION ON RADIO FREQUENCIES

This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Note: Changes or modifications not expressively approved by the party responsible for compliance could void the user’s authority to operate the equipment. The term IC before the radio certification number only signifies that Industry Canada technical specifications were met.

The typical operating range for your transmitter is approximately 33 ft (10 m). Vehicles with the remote start feature will have a greater range.

One of the following could cause a decrease in operating range:

Weather conditions.

Nearby radio towers.

Structures around the vehicle.

Other vehicles parked next to your vehicle.

Note: If you are in range, the remote control will operate if you press any button unintentionally.

Intelligent Access (If Equipped)

The system uses a radio frequency signal to communicate with your vehicle and authorize your vehicle to unlock when one of the following conditions are met:

You activate the front exterior door handle switch.

You press the luggage compartment button.

You press a button on the transmitter.

If excessive radio frequency interference is present in the area or if the transmitter battery is low, you may need to mechanically unlock your door. You can use the mechanical key blade in your intelligent access key to open the driver door in this situation. See Remote Control (page 47).

REMOTE CONTROL

Intelligent Access Key

image473

The radio frequency used by your remote control can also be used by other radio transmitters, for example amateur radios, medical equipment, wireless headphones, wireless remote controls, cell phones, battery chargers and alarm systems. If the frequencies are jammed, you will not be able to use your remote control. You can lock and unlock the doors with the key.

Note: Make sure to lock your vehicle before leaving it unattended.

47

image474

E144506

Your intelligent access keys operate the power locks and the remote start system. The key must be in your vehicle to activate the push-button start system.

image475

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image476image477

Keys and Remote Controls

image478

Removable Key Blade

image479

The intelligent access key also contains a removable mechanical key blade that you can use to unlock the driver door.

image480

E176269

Slide the release on the back of the remote control and pivot the cover off to access the key blade.

image481

E151795

Note: Your vehicle’s backup keys came with a security tag that provides important vehicle key cut information. Keep the tag in a safe place for future reference.

Using the Key Blade

The key cylinder is under a cap on the driver door handle.

To remove the cap:

E151956

1.Insert the key blade into the slot on the bottom of the handle and press up.

2.While maintaining upward pressure, move the cap rearward to release it. Gently remove the key while doing so.

To install the cap:

image482

E151957

1.Place the cap just forward of the key cylinder.

2.While applying pressure to the cap, move it forward until it is in place. You may hear a snap as it engages.

Make sure you have properly installed the cap by trying to move it rearward.

48

image483image484

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image485image486

Keys and Remote Controls

image487

Replacing the Battery

Note: Refer to local regulations when disposing of transmitter batteries.

Note: Do not wipe off any grease on the battery terminals or on the back surface of the circuit board.

Note: Replacing the battery will not delete the transmitter from the vehicle. The transmitter should operate normally.

A message will appear in the information display when the remote control battery is low. See Information Messages (page 108).

Intelligent Access Transmitter

The remote control uses two coin-type three-volt lithium batteries CR2025 or equivalent.

image488

E153890

image489

2.Insert a coin into the slot and twist to separate the housing.

image490

E151796

1.Slide the release on the back of the remote control and pivot the cover off.

E176226

3.Remove the batteries.

4.Install new batteries with the + facing each other.

Note: Make sure to replace the label between the two batteries.

5. Reinstall the housing and cover.

Car Finder

Press the button twice within

image491

three seconds. The horn will

E138623  sound and the turn signals will

flash. We recommend you use this method

to locate your vehicle, rather than using

the panic alarm.

49

image492image493

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image494image495

Keys and Remote Controls

image496

Sounding a Panic Alarm

Note: The panic alarm will only operate when the ignition is off.

Press the button to activate the

alarm. Press the button again or

E138624

switch the ignition on to

image497

deactivate.

the vehicle battery voltage is too low

the service engine soon light is on.

Remote Control Feedback

An LED on the remote control provides status feedback of remote start or stop commands.

image498

Remote Start

WARNING

image499

To avoid exhaust fumes, do not use remote start if your vehicle is parked indoors or in areas that are not well

image500

ventilated.

image501

Note: Do not use remote start if your vehicle is low on fuel.

The remote start button is on the transmitter.

image502

E138625

This feature allows you to start your vehicle from outside the vehicle. The transmitter has an extended operating range.

Vehicles with automatic climate control can be configured to operate when the vehicle is remote started. See Climate Control (page 123). A manual climate control system will run at the setting it was set to when you switched the vehicle off.

Many states and provinces have restrictions for the use of remote start. Check your local and state or provincial laws for specific requirements regarding remote start systems.

The remote start system will not work if:

the ignition is on

the alarm system is triggered

you disable the feature

the hood is open

the transmission is not in P

50

image503

LED

Status

Solid green

Remote start or

extension

successful

Solid red

Remote stop

successful; engine

off

Blinking red

Remote start or

stop failed

Blinking green

Waiting for status

update

Remote Starting the Vehicle

Note: You must press each button within three seconds of each other. Your vehicle will not remote start if you do not follow this sequence.

image504

E138626

The tag with your transmitter details the starting procedure.

To remote start your vehicle:

1.Press the lock button to lock all the doors.

image505

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image506image507

Keys and Remote Controls

image508

2.Press the remote start button twice. The exterior lamps will flash twice.

The horn will sound if the system fails to start, unless quiet start is on. Quiet start will run the blower fan at a slower speed to reduce noise. It can be switched on or off in the information display. See General Information (page 98).

Note: You must press the START/STOP button on the instrument panel once while applying the brake pedal before driving your vehicle.

The power windows will not work during the remote start and the radio will not turn on automatically.

The parking lamps will remain on and the vehicle will run for 5, 10, or 15 minutes, depending on the setting.

Extending the Vehicle Run Time

Repeat Steps 1 and 2 with the vehicle still running to extend the run time for another remote start duration. If you programmed the duration to last 10 minutes, the second 10 minutes will begin after what is left of the first activation time. For example, if the vehicle had been running from the first remote start for five minutes, the vehicle will continue to run now for a total of 15 minutes. You can extend the remote start up to a maximum of 35 minutes.

Wait at least five seconds before remote starting after a vehicle shutdown.

You can disable or enable the remote start system through the information display. See General Information (page 98).

Memory Feature (If Equipped)

You can use the remote control to recall memory positions. If programmed to a pre-set position, the remote control recalls memory positions when you unlock your vehicle. See Memory Function (page 136).

REPLACING A LOST KEY OR REMOTE CONTROL

Replacement keys or remote controls can be purchased from an authorized dealer. Authorized dealers can program remote controls for your vehicle. See Passive Anti-Theft System (page 69).

Turning the Vehicle Off After Remote

Starting

Press the button once. The

image509

parking lamps will turn off.

E138625

You may have to be closer to the

vehicle than when starting due to ground

reflection and the added noise of the

running vehicle.

51

image510image511

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image512image513

MyKey™

image514

PRINCIPLE OF OPERATION

MyKey allows you to program keys with restricted driving modes to promote good driving habits. All but one of the keys can be activated with these restricted modes.

Any keys that remain unprogrammed are referred to as administrator keys or admin keys. They can be used to:

Create a MyKey.

Program configurable MyKey settings.

Clear all MyKey features.

When you have created a MyKey, you can access the following information by using the information display to determine:

How many admin keys and MyKeys are programmed to your vehicle.

The total distance your vehicle traveled with a MyKey.

Note: Switch the vehicle on to use the system.

Note: All MyKeys are programmed to the same settings. You cannot program them individually.

Note: For vehicles equipped with push-button start, when both a MyKey and an admin remote transmitter are present, the admin remote transmitter will be recognized by the vehicle while switching the vehicle on to start the vehicle.

Non-configurable Settings

The following settings cannot be changed by an admin key user:

Safety belt reminder. You cannot disable this feature. The audio system will mute when the front seat passengers’ safety belts are not fastened.

Early low fuel or charge. The low-fuel or low charge warning activates earlier, giving the MyKey user more time to refuel or recharge.

Driver assist features, if equipped on your vehicle, are forced on: parking aid and Blind Spot Information System (BLIS) with cross traffic alert.

Satellite radio adult content restrictions, if equipped on your vehicle.

Configurable Settings

With an admin key, you can configure certain MyKey settings when you first create a MyKey and before you recycle the key or restart the vehicle. You can also change the settings afterward with an admin key.

A vehicle speed limit can be set. Warnings will be shown in the display followed by an audible tone when your vehicle reaches the set speed. You cannot override the set speed by fully depressing the accelerator pedal or by setting cruise control.

WARNING

image515

Do not set MyKey maximum speed limit to a limit that will prevent the driver from maintaining a safe speed

image516

considering posted speed limits and prevailing road conditions. The driver is always responsible to drive in accordance with local laws and prevailing conditions. Failure to do so could result in accident or injury.

image517

52

image518image519

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image520image521

MyKey™

image522

Various vehicle speed minders can be set. Once you select a speed, it will be shown in the display, followed by an audible tone when the preselected vehicle speed is exceeded.

Audio system maximum volume of 45%. A message will be shown in the display when you attempt to exceed the limited volume. Also, the speed-sensitive or compensated automatic volume control will be disabled.

Always on setting. When this is selected, you will not be able to switch off AdvanceTrac™ or traction control, 911 Assist or Emergency Assistance, or the do not disturb feature (if your vehicle is equipped with these features).

Message

image523 Settings

image524

image525 MyKey

image526

image527 Create MyKey

image528

When prompted, hold the OK button until you see a message informing you to label this key as a MyKey. The key will be restricted at the next start.

MyKey is successfully created. Make sure you label it so you can distinguish it from the admin keys.

You can also program configurable settings for the key(s). See

Programming/Changing Configurable Settings.

Message

CREATING A MYKEY

Use the information display to create a

MyKey:

1.Insert the key you want to program into the ignition. If your vehicle is equipped with a push-button start, place the remote control into the backup position. The location of your backup position is in another chapter. See Starting a Gasoline Engine (page 151).

2.Switch the ignition on.

3.Access the main menu on the information display controls. Use the arrow keys to get to the following menu selections:

image529

Action and Description

image530 Press the OK button or the right arrow key. image531

image532

image533 Press the OK button or the right arrow key. image534image535 Press the OK button or the right arrow key. image536

image537image538

Programming/Changing Configurable Settings

Use the information display to access your configurable MyKey settings.

1.Switch the ignition on using an admin key or remote control.

2.Access the main menu on the information display controls. Use the arrow keys to get to the following menu selections:

image539

Action and Description

Settings

Press the OK button or the right arrow key.

MyKey

Press the OK button or the right arrow key.

53

image540image541

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image542image543

MyKey™

image544

Note: You can clear or change your MyKey settings at any time during the same key cycle as you created the MyKey. Once you have switched the vehicle off, however, you will need an admin key to change or clear your MyKey settings.

CLEARING ALL MYKEYS

You can clear or change your MyKey settings using the information display control on the steering wheel. See Information Displays (page 98).

Switch the ignition on using an admin key or remote control.

To clear all MyKeys of all MyKey settings, press the left arrow button to access the main menu and scroll to:

image545

Message  image546 Action and Description

image547 Settings image548 Press the OK button.

image549 MyKey image550 Press the OK button.

Clear MyKey  Press and hold the OK button until the following message

displays.

All MyKeys

Cleared

Note: When you clear your MyKeys, you remove all restrictions and return all MyKeys to their original admin key status.

54

image551image552

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image553image554

MyKey™

image555

CHECKING MYKEY SYSTEM STATUS

You can find information on programmed MyKey(s) using the information display control on the steering wheel. See Information Displays (page 98).

To find information on programmed MyKey(s), press the left arrow button to access the main menu and scroll to:

image556

Message  image557 Description

image558 Settings image559 Press the OK button.

image560 MyKey image561 Press the OK button.

image562 Select one of the following:

MyKey Dist.  Tracks the distance when drivers use a MyKey. The only way

to delete the accumulated distance is by using an admin key to clear your MyKeys. If the distance does not accumulate as expected, then the intended user is not using the MyKey, or an admin key user recently cleared and then recreated a MyKey.

{0} MyKeys  Indicates the number of MyKeys programmed to your vehicle.

Use this feature to detect how many MyKeys you have for your vehicle and determine when a MyKey has been deleted.

{0} Admin Keys  Indicates how many admin keys are programmed to your

vehicle. Use this feature to determine how many unrestricted keys you have for your vehicle, and detect if an additional MyKey has been programmed.

55

image563image564

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image565image566

MyKey™

image567

USING MYKEY WITH REMOTE START SYSTEMS

MyKey is not compatible with non

Ford-approved, aftermarket remote start systems. If you choose to install a remote start system, see an authorized dealer for a Ford-approved remote start system.

MYKEY TROUBLESHOOTING

image568

Condition

I cannot create a MyKey.

I cannot program the configurable settings.

I cannot clear the MyKeys.

image569 I lost the only admin key.

image570

Potential Causes

The key or transmitter used to start the vehicle does not have admin privileges.

The key or transmitter used to start the vehicle is the only admin key (there always has to be at least one admin key).

Vehicles with keyless start: The keyless start transmitter is not placed in the backup position. See Starting a Gasoline Engine (page 151).

SecuriLock passive anti-theft system is disabled or in unlimited mode.

The key or transmitter used to start your vehicle does not have admin privileges.

No MyKeys are created. See Creating a MyKey (page 53).

The key or transmitter used to start your vehicle does not have admin privileges.

No MyKeys are created. See Creating a MyKey (page 53).

image571 Purchase a new key from an authorized dealer. image572

image573

56

image574image575

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image576image577

MyKey™

image578image579

Condition

I lost a key.

MyKey distances do not accumulate.

No MyKey functions with the keyless entry transmitter.

image580

Potential Causes

Program a spare key. See Passive Anti-Theft System (page 69).

The MyKey user is not using the MyKey.

An admin key holder cleared the MyKeys and created new MyKeys.

The key system has been reset.

An admin transmitter is present at vehicle start.

No MyKeys are created. See Creating a MyKey (page 53).

57

image581

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image582image583

Locks

image584

LOCKING AND UNLOCKING  Remote Control

You can use the power door lock control or the remote control to lock and unlock your vehicle.

You can use the remote control at any time. The luggage compartment release button only operates when your vehicle’s speed is less than 5 mph (8 km/h).

Power Door Locks

The power door lock control is on the driver and front passenger door panels.

image585

E138628

AUnlock.

B Lock.

Door Lock Indicator

An LED on each door window trim illuminates when you lock the door. It remains on for up to 10 minutes after you switch the ignition off.

Door Lock Switch Inhibitor

When you electronically lock your vehicle, the power door lock switch no longer operates after 20 seconds. You must unlock your vehicle with the remote control or keyless keypad, or switch the ignition on, to restore function to these switches. You can switch this feature on or off in the information display. See Information Displays (page 98).

Rear Door Unlocking and Opening

Pull the interior door handle twice to unlock and open a rear door. The first pull unlocks the door and the second pull unlatches the door.

58

image586

Unlocking the Doors (Two-Stage Unlock)

Press the button to unlock the driver door.

image587

E138629

Press the button again within three seconds to unlock all doors. The direction indicators flash.

Note: If the system does not function, use the key blade to lock and unlock your vehicle.

Press and hold both the lock and unlock buttons on the remote control for three seconds to change between driver door or all doors unlock mode. The direction indicators flash twice to indicate a change to the unlocking mode. Driver door unlock mode only unlocks the driver door when the unlock button is pressed once. All door unlock mode unlocks all doors when the unlock button is pressed once. The unlocking mode applies to the remote control, keyless entry keypad and intelligent access. You can also change the mode in the information display. See Information Displays (page 98).

Reporgramming the Unlocking Function

Note: When you press the unlock button, either all the doors are unlocked or only the driver door is unlocked. Pressing the unlock button again unlocks all the doors.

Press and hold the unlock and lock buttons on the remote control simultaneously for at least four seconds with the ignition off. The direction indicators flash twice to confirm the change.

To return to the original unlocking function, repeat the process.

image588

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image589image590

Locks

image591

Locking the Doors

Press the button to lock all doors. The direction indicators

image592

E138623  flash.

Press the button again within three seconds to confirm that all the doors are closed. The doors lock again, the horn sounds and the direction indicators flash if all the doors and the luggage compartment are closed.

Note: If the system does not function, use the key blade to lock and unlock your vehicle.

Mislock

If any door or the luggage compartment is open, or if the hood is open on vehicles with an anti-theft alarm or remote start, the horn sounds twice and the direction indicators do not flash. You can switch this feature on or off in the information display. See Information Displays (page 98).

Opening the Luggage Compartment

Press twice within three seconds to open the luggage

image593

E138630  compartment.

Locking and Unlocking the Doors with the Key Blade

Locking the Doors

image594

E112203

If the central locking function does not operate, lock the doors individually using the key in the position shown.

Left-Hand Side

Turn clockwise to lock.

Right-Hand Side

Turn counterclockwise to lock.

Unlocking the Doors

If the central locking function fails to operate, unlock the driver door and then unlock all other doors individually by pulling the interior door handles.

Note: If the doors have been unlocked using this method, the doors must be locked individually until the central locking function has been repaired.

59

image595image596

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image597image598

Locks

image599

Activating Intelligent Access (If

Equipped)

You must have the intelligent access key within 3.3 ft (1 m) of your vehicle.

At a Door

Pull an exterior door handle to unlock and open the door. Make sure not to touch the lock sensor area on the front of the handle.

image600

E157085

Touch the top of the door handle to lock your vehicle. There will be a brief delay before you can unlock your vehicle again.

Note: Keep the door handle clean to make sure the system operates correctly.

At the Luggage Compartment

Smart Unlocks for Intelligent Access Keys

This helps to prevent you from locking your key inside the passenger compartment or rear cargo area.

When you electronically lock your vehicle with any door open, transmission in park

(P)and the ignition off, the system searches for an intelligent access key in the passenger compartment after you close the last door. If the system finds a key, all of the doors immediately unlock and the horn sounds twice, indicating that a key is inside.

You can override the smart unlock feature and intentionally lock the intelligent access key inside your vehicle. To do this, lock your vehicle after you have closed all the doors by:

Using the keyless entry keypad.

Pressing the lock button on another intelligent access key.

Touching the locking area on the handle with another intelligent access key in your hand.

When you open one of the front doors and lock your vehicle using the power door lock control, all doors lock then unlock if:

E138632

image601

Press the button located in the top of the liftgate pull cup handle to unlatch the liftgate, and then pull on the outside handle.

image602

The ignition is on.

The ignition is off and the transmission is not in park (P).

Auto Relock

If you press the unlock button on the remote control and do not open a door within 45 seconds, your vehicle locks and the alarm arms. You can switch this feature on or off in the information display. See Information Displays (page 98).

60

image603

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image604image605

Locks

image606

Autolock

Autolock locks all the doors when all of the following occur:

All doors are closed.

The ignition is on.

You shift into any gear putting your vehicle in motion.

Your vehicle’s speed is greater than 12 mph (20 km/h).

Autolock repeats when:

You open then close any door while the ignition is on and your vehicle’s speed is less than 9 mph (15 km/h).

Your vehicle’s speed is greater than 12 mph (20 km/h).

Enabling or Disabling

To enable or disable the autolock feature, contact an authorized dealer.

Autounlock

Autounlock unlocks all the doors when all of the following occur:

The ignition is on, all the doors are closed and your vehicle’s speed is greater than 12 mph (20 km/h).

You stop your vehicle and switch the ignition off or to accessory.

You open the driver door within 10 minutes of switching the ignition off or to accessory.

Note: The doors do not autounlock if you electronically lock your vehicle after you switch the ignition off and before you open the driver door.

Enabling or Disabling

You can enable or disable the autounlock feature in the information display or an authorized dealer can do it for you. See General Information (page 98).

Illuminated Entry

The interior lamps and some exterior lamps illuminate when you unlock the doors with the remote control.

The lamps turn off if:

The ignition is on.

You press the remote control lock button.

25 seconds have elapsed.

The lamps do not turn off if:

You turn them on with the lamp control.

Any door is open.

Illuminated Exit

The interior lamps and some exterior lamps illuminate when all doors are closed, you switch the ignition off and you remove the key from the ignition.

The lamps turn off if all the doors remain closed and:

25 seconds have elapsed.

You press the START/STOP button.

Battery Saver

If you leave the courtesy lamps, dome lamps or headlamps on, the battery saver shuts them off 10 minutes after you switch the ignition off.

Accessory Mode Battery Saver for Intelligent Access Keys

If you leave the ignition switched on, it shuts off once it detects a certain amount of battery drain, or after 45 minutes.

61

image607image608

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image609image610

Locks

image611

MANUAL LIFTGATE

WARNINGS

image612

It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a crash, people riding in

image613

these areas are more likely to be seriously injured or killed. Do not allow people to ride in any area of your vehicle that is not equipped with seats and seatbelts. Be sure everyone in your vehicle is in a seat and using a seatbelt properly. Failure to follow this warning could result in serious personal injury or death.

Make sure to close and latch the liftgate to prevent drawing exhaust fumes into your vehicle. This will also

image614

prevent passengers and cargo from falling out. If you must drive with the liftgate open, keep the vents or windows open so outside air comes into your vehicle. Failure to follow this warning could result in serious personal injury.

image615

Note: Be careful when opening or closing the liftgate in a garage or other enclosed area to avoid damaging the liftgate.

Note: Do not hang anything, for example a bike rack, from the glass or liftgate. This could damage the liftgate and its components.

Note: Do not leave the liftgate open while driving. This could damage the liftgate and its components.

Opening the Liftgate

Manually

image616

E138632

Press the button located in the top of the liftgate pull cup handle to unlatch the liftgate, and then pull on the outside handle.

With the Remote Control

Press the button twice within three seconds.

image617

E138630

Closing the Liftgate

image618

E155976

A handle is located inside the liftgate to

help with closing.

62

image619image620

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image621image622

Locks

image623

POWER LIFTGATE (If Equipped)

• The ignition is on and the transmission

is not in park (P).

WARNINGS

image624

It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a crash, people riding in

image625

these areas are more likely to be seriously injured or killed. Do not allow people to ride in any area of your vehicle that is not equipped with seats and seatbelts. Make sure everyone in your vehicle is in a seat and properly using a seatbelt. Failure to follow this warning could result in serious personal injury or death.

Make sure to close and latch the liftgate to prevent drawing exhaust fumes into your vehicle. This will also

image626

prevent passengers and cargo from falling out. If you must drive with the liftgate open, keep the vents or windows open so outside air comes into your vehicle. Failure to follow this warning could result in serious personal injury.

Keep keys out of reach of children. Do not allow children to operate or play near an open or moving power

image627

liftgate. You should supervise the operation of the power liftgate at all times.

image628

Note: Make sure that you close the liftgate before operating or moving your vehicle, especially in an enclosure, like a garage or a parking structure. This could damage the liftgate and its components.

Note: Do not hang anything, for example a bike rack, from the glass or liftgate. This could damage the liftgate and its components.

The liftgate only operates with the transmission in park (P).

If there is a problem with the open or close request, a tone will sound for one of the following reasons:

63

image629

The battery voltage is below the minimum operating voltage.

The liftgate is not fully closed and your vehicle speed is at or above 3 mph (5 km/h).

If the liftgate starts to close after it has fully opened, this indicates there may be excessive weight on the liftgate or a possible gas strut failure. A repetitive tone sounds and the liftgate closes under control. Remove any excessive weight from the liftgate. If the liftgate continues to close after opening, have the system checked by an authorized dealer.

Opening and Closing the Liftgate

WARNING

image630

Make sure all persons are clear of the power liftgate area before using the power liftgate control.

image631image632

Note: Be careful when opening or closing the liftgate in a garage or other enclosed area to avoid damaging the liftgate.

Note: Do not leave the liftgate open while driving. This could damage the liftgate and its components.

From the Instrument Panel

Press the button on the instrument panel.

image633

With the Remote Control

Press the button twice within three seconds.

image634

E138630

image635

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image636image637

Locks

image638

With the Outside Control Button Opening the Liftgate

1.Unlock the liftgate with the remote control or power door unlock control. If an intelligent access key is within 3 ft (1 m) of the liftgate, the liftgate unlocks when you press the liftgate release button.

image639

E138632

2.Press the control button located in the top of the liftgate pull-cup handle.

Note: Allow the power system to open the liftgate. Manually pushing or pulling the liftgate may activate the system’s obstacle detection feature and stop the power operation or reverse its direction. Manually interfering with the liftgate motion may also replicate a gas strut failure.

Closing the Liftgate

WARNING

image640

Keep clear of the liftgate when activating the rear switch.

image641image642

E138636

image643

Press and release the liftgate control button.

Stopping the Liftgate Movement

Note: Do not apply sudden excessive force to the liftgate while it is in motion. This could damage the power liftgate and its components.

You can stop the liftgate movement by doing any of the following:

Pressing the liftgate control button.

Pressing the liftgate button on the remote control twice.

Pressing the liftgate button on the instrument panel.

Activating the obstacle detection feature.

Moving your foot under and away from the center rear bumper in a single-kick motion.*

*This method only works for vehicles with the hands-free liftgate feature.

Setting the Liftgate Open Height

1.Open the liftgate.

2.Stop the liftgate movement by pressing the control button on the liftgate when it reaches the desired height.

64

image644image645

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image646image647

Locks

image648

Note: Once the liftgate has stopped moving, you can also manually move it to the desired height.

3.Press and hold the liftgate control button on the liftgate until you hear a tone, indicating programming is complete.

Note: You can only use the liftgate control button to program the height.

Note: You cannot program the height if the liftgate position is too low.

The new open liftgate height is recalled when the power liftgate is opened. To change the programmed height, repeat the above procedure. Once you open the power liftgate, you can manually move it to a different height.

Note: The system recalls the new programmed height until you reprogram it, even if you disconnect the battery.

When operating the power liftgate after you have programmed a lower height than fully open, you can fully open the liftgate by manually pushing it upward to the maximum open position.

Obstacle Detection

When Closing

When Opening

The system stops when it detects an obstacle and a tone sounds. Once you remove the obstacle, you can continue to operate the liftgate.

Hands-Free Feature (If Equipped)

Make sure you have an intelligent access transmitter within 3 ft (1 m) of the liftgate.

image649

The system stops when it detects an obstacle. A tone sounds and the system reverses to open. Once you remove the obstacle, you can power close the liftgate.

Note: Entering your vehicle while the liftgate is closing can cause your vehicle to bounce and activate obstacle detection. To prevent this, let the power liftgate close completely before you enter your vehicle. Before driving off, check the instrument cluster for a liftgate or door ajar message or warning indicator. Failure to do this could result in unintentionally leaving the liftgate open while driving.

65

image650

E174120

1.Move your foot under and away from the rear bumper detection area in a single-kick motion. Do not move your foot sideways or the sensors may not detect the motion.

2.The liftgate powers open or close.

image651

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image652image653

Locks

image654

Note: Allow the power system to open the liftgate. Manually pushing or pulling the liftgate may activate the system’s obstacle detection feature and stop the power operation or reverse its direction. Manually interfering with the liftgate motion may also replicate a gas strut failure.

Note: Splashing water may cause the hands-free liftgate to open. Keep the intelligent access key away from the rear bumper detection area when washing your vehicle.

KEYLESS ENTRY (If Equipped)

SECURICODE™ KEYLESS ENTRY KEYPAD

The keypad is near the driver window. It illuminates when touched.

Note: If you enter your entry code too fast on the keypad, the unlock function may not work. Enter your entry code again more slowly.

image655

E138637

66

image656

You can use the keypad to do the following:

Lock or unlock the doors.

Recall memory seat and mirror positions.

Program and erase user codes.

Arm and disarm the anti-theft alarm.

You can operate the keypad with the factory-set five-digit entry code. The code is on the owner’s wallet card in the glove box and is available from an authorized dealer. You can also program up to five of your own five-digit personal entry codes.

Programming a Personal Entry Code

1.Enter the factory-set five-digit code.

2.Press 1·2 on the keypad within five seconds.

3.Enter your personal five-digit code. You must do this within five seconds of completing step 2.

4.Press 1·2 on the keypad to save personal code 1.

The doors lock then unlock to confirm that programming was successful.

To program additional personal entry codes, repeat steps 1 through 3, then for step 4:

Press 3·4 to save personal code 2.

Press 5·6 to save personal code 3.

Press 7·8 to save personal code 4.

Press 9·0 to save personal code 5.

If your vehicle is fitted with MyFord Touch, you can also program the system with a personal entry code.

image657

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image658image659

Locks

image660

Hints:

Do not set a code that uses five of the same number.

Do not use five numbers in sequential order.

The factory-set code works even if you have set your own personal code.

Recalling Memory Positions (If Equipped)

The programmed entry codes recall driver memory positions as follows:

Entry code 1 recalls driver 1 memory positions.

Entry code 2 recalls driver 2 memory positions.

Entry code 3 recalls driver 3 memory positions.

Note: Personal entry codes 4 and 5 do not recall memory positions.

Erasing a Personal Code

1.Enter the factory-set five-digit code.

2.Press and release 1·2 on the keypad within five seconds.

3.Press and hold 1·2 for two seconds. You must do this within five seconds of completing Step 2.

All personal codes erase and only the factory-set five-digit code works.

Anti-Scan Feature

The keypad goes into an anti-scan mode if you enter the wrong code seven times. This mode turns off the keypad for one minute and the keypad lamp flashes.

The anti-scan feature turns off after:

One minute of keypad inactivity.

You press the unlock button on the remote control.

67

image661

You switch the ignition on.

You unlock your vehicle using intelligent access.

Locking and Unlocking the Doors Locking All Doors

Press and hold 7·8 and 9·0 simultaneously with the driver door closed. You do not need to enter the keypad code first.

Unlocking the Driver Door

Enter the factory-set or your personal five-digit code. You must press each number within five seconds of each other. The interior lamps illuminate.

Note: All doors unlock if you enable the all-door unlocking mode. See Locking and Unlocking (page 58).

Unlocking All Doors

Enter the factory-set or your personal five-digit code, then press 3·4 within five seconds.

Displaying the Factory-Set Code

Note: You need to have two programmed intelligent access keys for this procedure.

image662

1

E195807

image663

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image664image665

Locks

image666

1.Open the floor console storage compartment lid.

image667

2

E195808

2.With the buttons facing the rear of your vehicle and the key ring up, place the first intelligent access key into the backup slot inside the center console.

3.Press the START/STOP button once and wait a few seconds.

4.Press the START/STOP button again and remove the key.

5.Insert the second programmed key into the backup slot, then press the START/STOP button.

The factory-set code appears in the

information display for a few seconds.

Note: The code may not display until after any other warning messages first display.

68

image668image669

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image670image671

Security

image672

PASSIVE ANTI-THEFT SYSTEM

Note: The system is not compatible with non-Ford aftermarket remote start systems. Use of these systems may result in engine starting problems and a loss of security protection.

Note: Metallic objects, electronic devices or a second coded key on the same key chain may result in vehicle starting problems, especially if they are too close to the key when starting your vehicle. Prevent these objects from touching the coded key when starting your vehicle. Switch the ignition off, move all objects on the key chain away from the coded key and restart your vehicle if a problem occurs.

Note: Do not leave a duplicate coded key in your vehicle. Always take your keys and lock all doors when leaving your vehicle.

SecuriLock®

The system helps prevent the engine from starting unless you use a coded key programmed to your vehicle. Using the wrong key may prevent your vehicle from starting. A message may appear in the information display.

If you are unable to start your vehicle with a coded key, it is not operating correctly. A message may appear in the information display.

Automatic Arming

The system arms when you switch the ignition off.

Automatic Disarming

The system disarms when you switch the ignition on with a coded key.

69

image673

Replacement Keys

The intelligent access key functions as a programmed key that operates the driver door lock and activates the intelligent access with push button start system, as well as a remote control.

If your coded keys are lost or stolen and you do not have an extra coded key, you need to erase the key codes from your vehicle and program new coded keys. Contact an authorized dealer.

Store an extra programmed key away from your vehicle in a safe place. You can purchase replacement keys or remote controls from an authorized dealer.

Programming a Spare Intelligent Access Key

Note: You can program a maximum of four intelligent access keys to your vehicle.

You must have two previously programmed intelligent access keys inside your vehicle and the new unprogrammed intelligent access keys readily accessible. If two previously programmed coded keys are not available, contact an authorized dealer.

Make sure that the ignition is switched off before beginning this procedure. Make sure that you close all the doors before beginning and that they remain closed throughout the procedure. Carry out all steps within 30 seconds of starting the sequence. Stop and wait for at least one minute before starting again if you carry out any steps out of sequence.

Read and understand the entire procedure before you begin.

image674

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image675image676

Security

image677

6.

Within 10 seconds, place a second

programmed intelligent access key in

1

the backup slot and press the push

button ignition switch.

7.

Wait five seconds and then press the

push button ignition switch again.

8.

Remove the intelligent access key.

9.

Wait five seconds, then place the

unprogrammed intelligent access key

in the backup slot and press the push

button ignition switch.

image678

Programming is now complete. Check that the remote control functions operate and your vehicle starts with the new intelligent

E195807

access key.

1.Open the floor console storage compartment lid.

image679

If programming was unsuccessful, wait 10 seconds and repeat Steps 1 through 7. If programming remains unsuccessful, contact an authorized dealer.

ANTI-THEFT ALARM

The system will warn you of an

unauthorized entry to your vehicle. It will

be triggered if any door, the luggage

2

compartment or the hood is opened

without using the key, remote control or

keyless entry keypad.

E195808

2.With the buttons facing the rear of your vehicle and the key ring up, place the intelligent access key into the backup slot.

3.Press the push button ignition switch.

4.Wait five seconds and then press the push button ignition switch again.

5.Remove the intelligent access key.

70

image680

The direction indicators will flash and the horn will sound if unauthorized entry is attempted while the alarm is armed.

Take all remote controls to an authorized dealer if there is any potential alarm problem with your vehicle.

Arming the Alarm

The alarm is ready to arm when there is not a key in your vehicle. Electronically lock your vehicle to arm the alarm.

Disarming the Alarm

Disarm the alarm by any of the following actions:

image681

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image682image683

Security

image684

Unlock the doors or luggage compartment with the remote control or keyless entry keypad.

Switch your vehicle on or start your vehicle.

Use a key in the driver door to unlock your vehicle, then switch your vehicle on within 12 seconds.

Note: Pressing the panic button on the remote control will stop the horn and signal indicators, but will not disarm the system.

71

image685image686

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image687image688

Steering Wheel

image689

ADJUSTING THE STEERING WHEEL – VEHICLES WITH: MANUAL ADJUSTABLE STEERING COLUMN

WARNING

image690

Do not adjust the steering wheel when your vehicle is moving.

image691image692

ADJUSTING THE STEERING WHEEL – VEHICLES WITH: POWER ADJUSTABLE STEERING COLUMN

Note: Make sure that you are sitting in the correct position. See Sitting in the Correct Position (page 132).

WARNING

image693

Note: Make sure that you are sitting in the correct position. See Sitting in the Correct Position (page 132).

image694

Do not adjust the steering wheel when your vehicle is moving.

image695

E191039

1.Unlock the steering column.

2.Adjust the steering wheel to the desired position.

image696

E161834

E191047

3. Lock the steering column.

image697

Use the control on the side of the steering column to adjust the position.

To adjust:

Tilt: Press the top or bottom of the control.

Telescope: Press the front or rear of the control.

72

image698

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image699image700

Steering Wheel

image701

End of Travel Position

The steering column sets a stopping position just short of the end of the column position to prevent damage to the steering column. A new stopping position sets if the steering column encounters an object when tilting or telescoping.

To reset the steering column to its normal stopping position:

1.Confirm there is nothing obstructing the motion of the steering column.

2.Press and hold the steering column control until the steering column stops moving.

3.Press the steering column control again. The steering column may begin to move again.

4.When the steering column stops, continue holding the control for an additional few seconds.

5.Repeat for each direction as necessary.

A new stopping position is set. The next time you tilt or telescope the steering column, it will stop just short of the end of the column position.

AUDIO CONTROL – VEHICLES WITHOUT: VOICE CONTROL

Select the required source on the audio unit.

Operate the following functions with the control:

image702

E168191

AVolume up.

BVolume down. C Mute.
DMedia.

ESeek down or previous.

Memory Feature

You can save and recall the steering column position with the memory function. See Memory Function (page 136).

Note: Pressing the adjustment control during memory recall cancels the operation.

Easy Entry and Exit Feature

When you switch the ignition off, the steering column will move to allow extra room to exit your vehicle. The column will return to the previous setting when you switch the ignition on. You can enable or disable this feature in the information display. See Information Displays (page 98).

73

image703

FSeek up or next.

MEDIA

Press repeatedly to scroll through available audio sources.

Seek, Next or Previous

Press the seek button to:

Tune the radio to the next or previous stored preset.

Play the next or the previous track. Press and hold the seek button to:

Tune the radio to the next station up or down the frequency band.

Seek through a track.

image704

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image705image706

Steering Wheel

image707

AUDIO CONTROL – VEHICLES WITH: VOICE CONTROL (If

Equipped)

You can operate the following functions with the control:

image708

E196496

AVolume up.

BVolume down. C Mute.

D Seek down or previous. E Seek up or next.

Seek, Next or Previous

Press the seek button to:

Tune the radio to the next or previous stored preset.

Play the next or the previous track. Press and hold the seek button to:

Tune the radio to the next station up or down the frequency band.

Seek through a track.

image709

VOICE CONTROL (If Equipped)

image710

E168194

Press the button to select or deselect voice control. See your SYNC information.

CRUISE CONTROL

Type 1

image711

E191246

74

image712

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image713image714

Steering Wheel

image715

Type 2  Information Display Control

Features

image716

E191247

See Cruise Control (page 197).

INFORMATION DISPLAY CONTROL

image717

E144636

See Information Displays (page 98).

image718

E144811

This control functions the same as the center control on the faceplate. See Audio Unit (page 347).

Use this control to adjust the right side of the information display. Navigate through the screen and press OK to select.

HEATED STEERING WHEEL (If

Equipped)

See your SYNC information.

75

image719

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image720image721

Wipers and Washers

image722

WINDSHIELD WIPERS

Note: Fully defrost the windshield before you switch the windshield wipers on.

Note: Make sure you switch the windshield wipers off before entering a car wash.

Note: Clean the windshield and wiper blades if they begin to leave streaks or smears. If that does not resolve the issue, install new wiper blades.

Note: Do not operate the wipers on a dry windshield. This may scratch the glass, damage the wiper blades or cause the wiper motor to burn out. Always use the windshield washers before wiping a dry windshield.

image723 D

image724

image725C

image726 B

image727A

E169313

ASingle wipe

BIntermittent wipe C Normal wipe

D High speed wipe

Intermittent Wipe

A

B

image728

C

E169314

AShortest wipe interval B Intermittent wipe

C Longest wipe interval

Use the rotary control to adjust the intermittent wipe interval.

Speed Dependent Wipers

When your vehicle speed increases, the interval between wipes decreases.

AUTOWIPERS (If Equipped)

Note: Fully defrost the windshield before switching on the windshield wipers.

Note: Make sure you switch off the windshield wipers before entering a car wash.

Note: Clean the windshield and wiper blades if they begin to leave streaks or smears. If that does not resolve the issue, install new wiper blades.

Note: If you switch autolamps on in conjunction with autowipers, your low beam headlamps will illuminate automatically when the rain sensor activates the windshield wipers continuously.

76

image729image730

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image731image732

Wipers and Washers

image733

Note: Wet or winter driving conditions with ice, snow or salty road mist can cause inconsistent and unexpected wiping or smearing.

In these conditions, you can do the following to help keep your windshield clear:

Lower the sensitivity of the autowipers to reduce the amount of smearing.

Switch to normal or high-speed wipe.

Switch the autowipers off.

A image734B

image735

C

E169315

AHighest sensitivity B On

C Lowest sensitivity

Use the rotary control to adjust the sensitivity of the rain sensor. Set the control to low sensitivity, and the wipers will turn on when the rain sensor detects a large amount of moisture on the windshield. Set the control to high sensitivity, and the wipers will turn on when the rain sensor detects a small amount of moisture on the windshield.

Note: When you set the wiper system to intermittent wipe and the autowiper system is on, the autowiper sensitivity setting adjusts the wiper speed according to the moisture on the windshield only. Use the wiper lever to wipe the windshield on-demand.

Keep the outside of the windshield clean. The rain sensor is very sensitive. If the area around the mirror is dirty, then the wipers may operate if dirt, mist or insects hit the windshield.

WINDSHIELD WASHERS

Note: Do not operate the washers when the washer reservoir is empty. This may cause the washer pump to overheat.

image736

The autowipers feature uses a rain sensor. You will find it in the area around the interior mirror. The rain sensor monitors the amount of moisture on the windshield and automatically turns on the wipers. It will adjust the wiper speed by the amount of moisture that the sensor detects on the windshield.

Note: This autowiper feature is automatically set to on and remains on until you switch it off in the information display. You can also switch the feature back on at any time. See Autowipers (page 76).

77

image737

E169316

To operate the washers and spray the windshield, pull the lever toward you.

image738

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image739image740

Wipers and Washers

image741

A wipe will occur a few seconds after washing to clear any remaining washer fluid. This feature can be switched on or off in the information display. See General Information (page 98).

Front Camera Washer (If Equipped)

Operating the windshield washer will also operate the front camera washer.

REAR WINDOW WIPER AND WASHERS

Rear Window Wiper

Note: Make sure you switch the rear window wiper and ignition off before using an automatic car wash.

image742

E171615

AIntermittent wipe. B Low speed wipe. C Off.

Rear Window Washer

image743

E167407

Push the lever away from you to operate the rear window washer. When you release the lever, wiping continues for a short period of time.

Press the top of the button to switch

intermittent wipe on. Press the top of the

button again to switch low speed wipe on.

Press the bottom of the button to switch

the rear window wiper off.

When you switch on the front wipers and

move the gearshift lever to reverse (R),

rear intermittent wipe automatically turns

on.

78

image744image745

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image746image747

Lighting

image748

GENERAL INFORMATION

Condensation in Lamp Assemblies

Exterior lamps have vents to accommodate normal changes in air pressure.

Condensation can be a natural by-product of this design. When moist air enters the lamp assembly through the vents, there is a possibility that condensation can occur when the temperature is cold. When normal condensation occurs, a fine mist can form on the interior of the lens. The fine mist eventually clears and exits through the vents during normal operation.

Clearing time may take as long as 48 hours under dry weather conditions.

Examples of acceptable condensation are:

The presence of a fine mist (no streaks, drip marks or large droplets).

A fine mist covers less than 50% of the lens.

Examples of unacceptable condensation are:

A water puddle inside the lamp.

Streaks, drip marks or large droplets present on the interior of the lens.

If you see any unacceptable condensation, have your vehicle checked by an authorized dealer.

LIGHTING CONTROL

image749

E142449

AOff

BParking lamps, instrument panel lamps, license plate lamps and tail lamps

CHeadlamps

High Beams

image750

E162679

Push the lever forward to switch the high

beams on.

Push the lever forward again or pull the

lever toward you to switch the high beams

off.

79

image751image752

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image753image754

Lighting

image755

Headlamp Flasher

image756

E162680

Pull the lever toward you slightly and release it to flash the headlamps.

AUTOLAMPS (If Equipped)

WARNING

image757

The autolamps switch position may not activate the headlamps in all low visibility conditions, such as daytime

image758

fog. Always ensure that your headlamps are switched to auto or on, as appropriate, during all low visibility conditions. Failure to do so may result in a collision.

image759

E142451image760

image761

If equipped, the following also activate when the lighting control is in the autolamps position and you switch them on in the information display:

Configurable daytime running lamps.

Automatic high beam control.

Adaptive headlamp control.

The headlamps remain on for a period of time after you switch the ignition off. Use the information display controls to adjust the period of time that the headlamps remain on. See Information Displays (page 98).

Note: With the headlamps in the autolamps position, you cannot switch the high beam headlamps on until the autolamps system turns the low beam headlamps on.

Windshield Wiper Activated Headlamps

The windshield wiper activated headlamps turn on within 10 seconds when you switch the windshield wipers on and the lighting control is in the autolamps position. They turn off approximately 60 seconds after you switch the windshield wipers off.

The headlamps will not turn on by wiper activation:

During a mist wipe.

When the wipers are on to clear washer fluid during a wash condition.

If the wipers are in intermittent mode.

Note: If you switch autolamps and autowipers on, the headlamps will automatically turn on when the windshield wipers continuously operate.

When the lighting control is in the

autolamps position, the headlamps

automatically turn on in low light situations

or when the wipers activate.

80

image762image763

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image764image765

Lighting

image766

INSTRUMENT LIGHTING DIMMER

Note: If you disconnect the battery or it becomes discharged, the illuminated components will switch to the maximum setting.

image767

A  B

E165366

APress repeatedly or press and hold to dim.

BPress repeatedly or press and hold to brighten.

HEADLAMP EXIT DELAY

After you switch the ignition off, you can switch the headlamps on by pulling the direction indicator lever toward you. You will hear a short tone. The headlamps will switch off automatically after three minutes with any door open or 30 seconds after the last door has been closed. You can cancel this feature by pulling the direction indicator toward you again or switching the ignition on.

81

image768

DAYTIME RUNNING LAMPS (If

Equipped)

WARNING

image769

The daytime running lamps system does not activate the rear lamps and may not provide adequate lighting

image770

during low visibility driving conditions. Also, the autolamps switch position may not activate the headlamps in all low visibility conditions, such as daytime fog. Make sure the headlamps are switched to auto or on, as appropriate, during all low visibility conditions. Failure to do so may result in a crash.

image771

Type 1 – Conventional (Non-Configurable)

The daytime running lamps turn on when:

1.The ignition is switched to the on position.

2.The transmission is not in park (P) for vehicles with automatic transmissions or the parking brake is released for vehicles with manual transmissions.

3.The lighting control is in the off, parking lamp or autolamps positions.

4.The headlamps are off.

Type 2 – Configurable

Switch the daytime running lamps on or off using the information display controls. See Information Displays (page 98).

The daytime running lamps turn on when:

1.They are switched on in the information display. See Information Displays (page 98).

2.The ignition is switched to the on position.

image772

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image773image774

Lighting

image775

3.The transmission is not in park (P) for vehicles with automatic transmissions or the parking brake is released for vehicles with manual transmissions.

4.The lighting control is in the autolamps position.

5.The headlamps are off.

The other lighting control switch positions do not activate the daytime running lamps, and you can use them to temporarily override autolamp control.

When switched off in the information display, the daytime running lamps are off in all lighting control switch positions.

AUTOMATIC HIGH BEAM

CONTROL (If Equipped)

The system will automatically turn on your high beams if it is dark enough and no other traffic is present. When it detects the headlights of an approaching vehicle, the tail lamps of the preceding vehicle or street lighting, the system will turn off the high beams before they distract other drivers. The low beams remain on.

Note: If it appears that automatic control of the high beams is not functioning properly, check the windshield in front of the camera for a blockage. A clear view of the road is required for proper system operation. Have any windshield damage in the area of the camera’s field-of-view repaired.

Note: If the system detects a blockage, for example bird droppings, bug splatter, snow or ice, the system will go into low beam mode until you clear the blockage. A message may also appear in the instrument cluster display noting the front camera is blocked.

82

image776

Note: Typical road dust, dirt and water spots will not affect the performance of the automatic high beam system . However, in cold or inclement weather conditions, you will notice a decrease in the availability of the high beam system, especially at start up. If you want to change the beam state independently of the system, you may switch the high beams on or off using the multifunction switch. Automatic control will resume when conditions are correct.

Note: Modification of the vehicle ride height such as using much larger tires, may degrade feature performance.

A camera sensor, centrally mounted behind the windshield of your vehicle, continuously monitors conditions to decide when to switch the high beams off and on.

Once the system is active, the high beams will switch on if:

the ambient light level is low enough

there is no traffic in front of the vehicle

the vehicle speed is greater than approximately 32 mph (52 km/h)

The high beams will switch off if:

the system detects the headlamps of an approaching vehicle or the tail lamps of a preceding vehicle.

vehicle speed falls below approximately 27 mph (44 km/h)

the ambient light level is high enough that high beams are not required

the system detects severe rain, snow or fog

the camera is blocked

Activating the System

Switch on the system using the information display and autolamps. See Information Displays (page 98). See Autolamps (page 80).

image777

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image778image779

Lighting

image780

E142451image781

image782

Switch the lighting control to the autolamps position.

Manually Overriding the System

image783

E169254

DIRECTION INDICATORS

image784

E169255

Push the lever up or down to use the direction indicators.

Note: Tap the lever up or down to make the direction indicators flash three times to indicate a lane change.

INTERIOR LAMPS

The lamps will turn on when you have met one of the following conditions:

You open any door.

You press a remote control button.

When the automatic control has activated the high beams, pushing or pulling the stalk will provide a temporary override to low beam.

Use the information display menu to permanently deactivate the system, or turn the lighting control switch from autolamps to headlamps.

83

image785

You press the all lamps on button on the front interior lamp.

Front Interior Lamp

Note: The front interior lamp buttons are on the overhead console. The exact location of each button on the overhead console depends upon which roof, moonroof, and window shade features are equipped on the vehicle.

image786

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image787image788

Lighting

image789

Note: Press the button to switch the door Type 2 function off when you open any door. The indicator lamp will light amber when the door function is off. When the door function is off and you open a door, the courtesy and door lamps will stay off. Press the button again to switch the door function back on. The indicator lamp will light blue when the door function is on. When the door function is on and you open a door, the courtesy and door lamps will light.

image790

Type 1

image791

D  A  B  C  D

E192153

AAll lamps on button B Door function button C All lamps off button D Individual dome lamps

image792

C

B

A

C

E199032

ADoor function button B All lamps on button C Individual dome lamps

You can switch individual map lamps on independently by pressing a map lens.

Rear Interior Lamp (If Equipped)

Type 1

image793

E169470

84

image794

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image795image796

Lighting

image797

Type 2

image798

E199026

Type 3

image799

E199027

You can switch dome lamps on by pressing the button.

AMBIENT LIGHTING (If Equipped)

Adjust the ambient lighting using the

touchscreen.

85

image800image801

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image802image803

Windows and Mirrors

image804

POWER WINDOWS

WARNINGS

image805

Do not leave children unattended in your vehicle and do not let them play with the power windows. They may

image806

seriously injure themselves.

When closing the power windows, you should verify they are free of obstructions and make sure that

image807

children and pets are not in the proximity of the window openings.

image808image809

E146043

Note: You may hear a pulsing noise when just one of the windows is open. Lower the opposite window slightly to reduce this noise.

2.Release the control.

3.Open the window and then try to close it automatically.

4.Repeat the procedure if the window does not close automatically.

Note: The one-touch down and one-touch up feature only applies to the front windows.

Bounce-Back

The window will automatically stop and reverse some distance if it detects an obstacle while closing.

Overriding the Bounce-Back Feature

WARNING

image810

When you override the bounce-back feature the window will not reverse if it detects an obstacle. Take care

image811

when closing the windows to avoid personal injury or damage to your vehicle.

image812

Pull up the window switch and hold within two seconds of the window reaching the bounce-back position. The window travels up with no bounce-back protection. The window stops if you release the switch before the window is fully closed.

Press the control to open the window.  Window Lock

image813

Lift the control to close the window.

One-Touch Down

Press the control fully and release it. Press again or lift it to stop the window.

One-Touch Up

Lift the control fully and release it. Press again or lift it to stop the window.

Resetting One-Touch Up

E144072

1.Lift and hold the control until the window is fully closed.

86

image814image815

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image816image817

Windows and Mirrors

image818

Press the control to lock or unlock the rear window controls. It illuminates when you lock the rear window controls.

Accessory Delay

The window switches remain operational for several minutes when you switch the ignition off or until you open either front door.

GLOBAL OPENING

You can use the remote control to operate the windows with the ignition off.

Note: You can enable or disable this feature in the information display, or see an authorized dealer. See General Information (page 98).

Note: To operate this feature, accessory delay must not be active.

Opening the Windows

You can open the windows for a short time after you unlock your vehicle with the remote control. After you unlock your vehicle, press and hold the remote control unlock button to open the windows. Release the button once movement starts. Press the lock or unlock button to stop movement.

Note: Only the front windows are operated during global opening.

EXTERIOR MIRRORS

Power Exterior Mirrors

WARNING

image819

E144073

image820

ALeft-hand mirror.

BAdjustment control. C Right-hand mirror.

To adjust your mirrors, switch your vehicle on (with the ignition in accessory mode or the engine running) and then:

1.Select the mirror you want to adjust. The control lights.

2.Use the adjustment control to adjust the position of the mirror.

3.Press the mirror control again. The control light turns off.

Fold-Away Exterior Mirrors

Push the mirror toward the door window glass. Make sure that you fully engage the mirror in its support when returning it to its original position.

Heated Exterior Mirrors (If Equipped)

See Heated Windows and Mirrors (page 130).

Memory Mirrors (If Equipped)

Do not adjust the mirrors when your vehicle is moving.

image821image822

You can save and recall the mirror positions through the memory function. See Memory Function (page 136).

87

image823image824

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image825image826

Windows and Mirrors

image827

Auto-dimming Feature (If Equipped)

image828

The driver exterior mirror automatically dims when the interior auto-dimming mirror turns on.

Direction Indicator Mirrors (If Equipped)

While the vehicle is running, the

C

forward-facing portion of the appropriate

mirror housing blinks when you switch on

the direction indicator.

Puddle Lamps (If Equipped)

The lamps on the bottom part of the mirror

housing light when you use your

B

transmitter to unlock the doors or when

you open a door.

Integrated Blind Spot Mirror (If

Equipped)

WARNING

image829

Objects in the blind spot mirror are closer than they appear.

image830image831

Blind spot mirrors have an integrated convex mirror built into the upper outboard corner of the exterior mirrors. They can assist you by increasing visibility along the side of your vehicle.

Check the main mirror first before a lane change, then check the blind spot mirror. If no vehicles are present in the blind spot mirror and the traffic in the adjacent lane is at a safe distance, signal that you are going to change lanes. Glance over your shoulder to verify traffic is clear, and carefully change lanes.

88

image832

A

E138665

The image of the approaching vehicle is small and near the inboard edge of the main mirror when it is at a distance. The image becomes larger and begins to move outboard across the main mirror as the vehicle approaches (A). The image transitions from the main mirror and begins to appear in the blind spot mirror as the vehicle approaches (B). The vehicle transitions to your peripheral field of view as it leaves the blind spot mirror (C).

Blind Spot Information System (If

Equipped)

See Blind Spot Information System (page 209).

image833

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image834image835

Windows and Mirrors

image836

INTERIOR MIRROR

WARNING

image837

Do not adjust the mirror when your vehicle is moving.

image838image839

Note: Do not clean the housing or glass of any mirror with harsh abrasives, fuel or other petroleum or ammonia-based cleaning products.

You can adjust the interior mirror to your preference. Some mirrors also have a second pivot point. This lets you move the mirror head up or down and from side to side.

Pull the tab below the mirror toward you to reduce glare at night.

Auto-Dimming Mirror (If Equipped)

SUN VISORS

image840

E138666

Rotate the sun visor toward the side window and extend it rearward for extra shade.

Illuminated Vanity Mirror

Note: Do not block the sensors on the front

and back of the mirror. Mirror performance

may be affected. A rear center passenger or

raised rear center head restraint may also

block light from reaching the sensor.

The mirror will dim automatically to reduce

glare when bright lights are detected from

behind your vehicle. It will automatically

return to normal reflection when you select

reverse gear to make sure you have a clear

view when backing up.

E162197

Lift the cover to switch the lamp on.

MOONROOF (If Equipped)

WARNINGS

Do not let children play with the

moonroof or leave them unattended

in the vehicle. They may seriously

hurt themselves.

image841image842

89

image843image844

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image845image846

Windows and Mirrors

image847

WARNINGS

image848

When closing the moonroof, you should verify that it is free of obstructions and make sure that

image849

children and pets are not in the proximity of the roof opening.

image850

The moonroof controls are located on the overhead console and have a one-touch open and close feature. To stop its movement during one-touch operation, press the control a second time.

Opening and Closing the Moonroof

image851

closed. Note: The sunshade stops short of its fully opened position for the comfort of rear passengers. To open the sunshade fully, press the control again.

DSunshade close. Press and release to close the sunshade.

EMoonroof close. Press and release to close the moonroof from either the open or vent positions.

Note: The moonroof stops 8 in (200 mm) from the closed position. To close the moonroof, press and hold the moonroof close control until the moonroof is in the fully closed position.

E191272

AMoonroof open. Press and release to open the moonroof. The moonroof stops short of the fully opened position. Press and release the control again to open the moonroof fully.

BMoonroof vent. Press and release to vent the moonroof.

CSunshade open. Press and release to open the sunshade. The sunshade opens automatically with the moonroof. You can also open the sunshade with the moonroof

90

image852image853

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image854image855

Instrument Cluster

image856

GAUGES

Type 1

image857

E144485

ATachometer

BInformation Display C Speedometer

D Fuel Gauge

EEngine Coolant Temperature Gauge

Information Display

Odometer

Located in the bottom of the information display. Registers the accumulated distance your vehicle has traveled.

image858

Outside Air Temperature Shows the outside air temperature.

Compass

Displays the vehicle’s heading direction.

91

image859

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image860image861

Instrument Cluster

image862

Trip Computer

See General Information (page 98).

Vehicle Settings and Personalization See General Information (page 98).

Engine Coolant Temperature Gauge

Shows the temperature of the engine coolant. At normal operating temperature, the needle remains in the center section. If the needle enters the red section, the engine is overheating. Stop the engine, switch the ignition off and determine the cause once the engine has cooled down.

Note: Do not restart the engine until the cause of overheating has been resolved.

WARNING

image863

Never remove the coolant reservoir cap while the engine is running or hot.

image864image865

Fuel Gauge

Note: The fuel gauge may vary slightly when your vehicle is moving or on a gradient.

92

image866

Switch the ignition on. The fuel gauge indicates approximately how much fuel is left in the fuel tank. The arrow adjacent to the fuel pump symbol indicates on which side of your vehicle the fuel filler door is located.

The needle should move toward F when you refuel your vehicle. If the needle points to E after adding fuel, this indicates your vehicle needs service soon.

After refueling some variability in needle position is normal:

It may take a short time for the needle to reach F after leaving the gas station. This is normal and depends upon the slope of pavement at the gas station.

The fuel amount dispensed into the tank is a little less or more than the gauge indicated. This is normal and depends upon the slope of pavement at the gas station.

If the gas station nozzle shuts off before the tank is full, try a different gas pump nozzle.

Low Fuel Reminder

A low fuel reminder triggers at 50 mi (80 km) to empty.

image867

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image868image869

Instrument Cluster

image870

Type 2

image871

E144486

ALeft Information Display B Speedometer

C Right Information Display. See General Information (page 98).

Left Information Display

Vehicle Settings and Personalization

Odometer

See General Information (page 98).

Located in the bottom of the information

display. Registers the accumulated

distance your vehicle has traveled.

Trip Computer

See General Information (page 98).

93

image872image873

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image874image875

Instrument Cluster

image876

WARNING LAMPS AND INDICATORS

The following warning lamps and indicators will alert you to a vehicle condition that may become serious. Some lamps will illuminate when you start your vehicle to make sure they work. If any lamps remain on after starting your vehicle, refer to the respective system warning lamp for further information.

Note: Some warning indicators appear in the information display and function the same as a warning lamp, but do not display when you start your vehicle.

Adaptive Cruise Control (If Equipped)

The speed control system indicator light changes color to

image877

E144524

indicate what mode the system

is in: See Using Adaptive Cruise Control (page 198).

On (white light): Illuminates when you turn the adaptive cruise control system on. Turns off when you turn the speed control system off.

Engaged (green light): Illuminates when the adaptive cruise control system engages. Turns off when the speed control system is disengaged.

Adaptive Steering (If Equipped)

The adaptive steering system

indicator illuminates if the

E223375

system detects a fault during the

image878

continuous diagnostic checks.

94

image879

Adaptive Steering Initialization (yellow, flashing): The adaptive steering system has detected a difference between steering wheel angle and the desired road wheel angle. The steering wheel adjusts itself to correct this difference. This adjustment is part of normal system operation.

Adaptive Steering Off (yellow, solid): The adaptive steering system is off. It is possible that the steering wheel may not be straight when the vehicle is driving straight ahead. If this message persists, see an authorized dealer.

Adaptive Steering Loss (red, solid): The adaptive steering system integrity cannot be verified. Do not drive the vehicle and contact an authorized dealer immediately. See Steering (page 214).

Anti-Lock Braking System

If it illuminates when you are driving, this indicates a

image880

malfunction. You will continue to have normal braking (without Anti-lock braking system) unless the brake system warning lamp is also illuminated. Have the system checked by an authorized dealer.

Battery

If it illuminates while driving, it

image881

indicates a malfunction. Switch off all unnecessary electrical

equipment and have the system checked by an authorized dealer immediately.

Blind Spot Monitor (If Equipped)

It will illuminate when you switch

this feature off or in conjunction

E151262

with a message. See Blind Spot

image882

Information System (page 209).

image883

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image884image885

Instrument Cluster

image886

Brake System  Electric Park Brake

It will illuminate when you engage the parking brake with

image887

E144522

the ignition on.

If it illuminates when you are driving, check that you do not have the parking brake engaged. If you do not have the parking brake engaged, this indicates low brake fluid level or a brake system malfunction. Have the system checked immediately by an authorized dealer.

WARNING

image888

Driving your vehicle with the warning lamp on is dangerous. A significant decrease in braking performance

image889

may occur. It will take you longer to stop your vehicle. Have your vehicle checked by your authorized dealer immediately. Driving extended distances with the parking brake engaged can cause brake failure and the risk of personal injury.

image890

Cruise Control (If Equipped)

It will illuminate when you switch this feature on.

image891

E71340

Direction Indicator

Illuminates when you turn the left or right direction indicator or the hazard warning flasher on. If

image892

the indicators stay on or flash faster, check for a burned out bulb. See Changing a Bulb (page 278).

Door Ajar

Displays when the ignition is on and any door is not completely closed.

image893

95

image894

It will illuminate or flash when the electric parking brake has a

image895

E146190

malfunction. See Electric Parking Brake (page 176).

Engine Coolant Temperature

Illuminates when the engine coolant temperature is high. Stop the vehicle as soon as

image896

possible, switch off the engine and let cool.

See Engine Coolant Check (page 267).

Engine Oil

If it illuminates with the engine running or when you are driving,

image897

this indicates a malfunction. Stop your vehicle as soon as it is safe to do so and switch the engine off. Check the engine oil level. See Engine Oil Check (page 266).

Note: Do not resume your journey if it illuminates despite the level being correct. Have the system checked by your authorized dealer immediately.

Fasten Seatbelt

It will illuminate and a chime will sound to remind you to fasten your seatbelt. See Seatbelt

image898

Reminder (page 35).

Front Airbag

If it fails to illuminate when you image899 start your vehicle, continues to flash or remains on, it indicates a malfunction. Have the system checked

image900

by an authorized dealer.

image901

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image902image903

Instrument Cluster

image904

Heads Up Display (If Equipped)

A red beam of lights will illuminate on the windshield in

image905

E156133 certain instances when using adaptive cruise control or the collision warning system. It will also illuminate momentarily when you start your vehicle to make sure the display works.

Low Washer Fluid

It will illuminate when the windshield washer fluid is low.

image906

E132353

Parking Lamps

It will illuminate when you switch the parking lamps on.

image907

High Beam

It will illuminate when you switch the high beam headlamps on. It

image908

will flash when you use the headlamp flasher.

Powertrain Fault

Illuminates when the system has detected a powertrain or an all-wheel drive fault. Contact an

image909

authorized dealer as soon as possible.

Hood Ajar

Displays when the ignition is on and the hood is not completely

image910

E159324  closed.

Low Fuel Level

It will illuminate when the fuel level is low or the fuel tank is nearly empty. Refuel as soon as

image911

possible.

Low Tire Pressure Warning

It will illuminate when your tire pressure is low. If the lamp

image912

remains on with the engine running or when driving, check your tire pressure as soon as possible.

It will also illuminate momentarily when you switch the ignition on to confirm the lamp is functional. If it does not illuminate when you switch the ignition on, or begins to flash at any time, have the system checked by an authorized dealer.

96

image913

Service Engine Soon

If the service engine soon

image914

indicator light stays illuminated after you start the engine, it

indicates that the On Board Diagnostics system (OBD) has detected a malfunction of your vehicle emissions control system. Refer to On board diagnostics (OBD) in the Fuel and Refueling chapter for more information about having your vehicle serviced. See Emission Control System (page 163).

If the light is blinking, engine misfire is occurring which could damage your catalytic converter. Drive in a moderate fashion (avoid heavy acceleration and deceleration) and have your vehicle serviced immediately.

WARNING

image915

Under engine misfire conditions, excessive exhaust temperatures could damage the catalytic

image916

converter, the fuel system, interior floor coverings or other vehicle components, possibly causing a fire. Have an authorized dealer service your vehicle immediately.

image917image918

Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

image919image920

Instrument Cluster

image921

When you first switch the ignition on, before engine start, the service engine soon indicator light illuminates to check the bulb and to indicate whether your vehicle is ready for inspection maintenance testing.

Normally, the service engine soon light will stay on until you crank the engine, and then turn itself off if no malfunctions are present. However, if after 15 seconds the service engine soon light blinks eight times, it means that your vehicle is not ready for inspection maintenance testing. See Emission Control System (page 163).

Stability Control

It will flash when the system is active. If it remains illuminated