Razer Adaro In-Ear Analog Earphones User Manual

 

image1

Incorporating quality hardware packed inside its sleek body, the Razer Adaro In-Ear is more than just a head turner. High performance, custom-tuned 10mm neodymium drivers are sonically optimized to complement their inner acoustics chambers, producing crisp, high fidelity stereo sound. Interchangeable ear-tips in 3 sizes and bi-flange attachments are included, allowing for a personalized fit and brilliant audio.

Combining killer sound, a sleek, robust aluminum body and a convenient, compact carrying case, the Razer Adaro In-Ear is built for pure listening pleasure on the go.

1 | razer™

 

TABLE OF CONTENTS

1. PACKAGE CONTENTS / HARDWARE REQUIREMENTS  3

2. REGISTRATION / TECHNICAL SUPPORT  3

3. DEVICE LAYOUT  4

4. TECHNICAL SPECIFICATIONS  5

5. USING YOUR RAZER ADARO IN-EAR ANALOG EARPHONES  6

6. SAFETY AND MAINTENANCE  7

7. LEGALESE  8

2 | For gamers by gamers™

 

1. PACKAGE CONTENTS / HARDWARE REQUIREMENTS

PACKAGE CONTENTS

 Razer Adaro In-Ear Analog Earphones
 3 Interchangeable Ear-tips in Varying Sizes
 Carrying Pouch
 Quick Start Guide

HARDWARE REQUIREMENTS

Audio Usage

 Devices with 3.5mm audio jack
1.REGISTRATION / TECHNICAL SUPPORT

REGISTRATION

Please visit www.razerzone.com/registration for online product registration.

image2

TECHNICAL SUPPORT

What you’ll get:

6 months limited manufacturer’s warranty.
Free online technical support at www.razersupport.com.

3 | razer™

 

3. DEVICE LAYOUT

image3

A.Left Earphone
B.Right Earphone
C.3 Interchangeable Ear-tips in Varying Sizes
D.3.5mm Audio Jack
E.Carrying Pouch

4 | For gamers by gamers™

 

4.TECHNICAL SPECIFICATIONS
 Drivers: 10mm Neodymium Magnets
 Frequency Response: 20Hz 20kHz
 Impedance: 32 Ω
 Sensitivity @ 1kHz: 96dB ± 3dB
 Input Power: 10mW
 Connector: Gold-Plated 3.5mm Audio Jack
 Cable Length: 1.3m / 4.27ft
 Approximate Weight: 22g / 0.05lbs

5 | razer™

 

5.USING YOUR RAZER ADARO IN-EAR ANALOG EARPHONES

ACHIEVING A PROPER SEAL

To enjoy the full-bodied bass of the Razer Adaro In-Ear Analog Earphones as it is intended, please ensure that the earphones are properly fitted into your ears and that a proper seal is achieved to block out ambient noise.

REMOVING YOUR RAZER ADARO IN-EAR ANALOG EARPHONES

CAUTION: Do not yank out earphones from your ears as the sudden release of air pressure might cause potential discomfort.

EAR-TIP SIZES

Due to the different ear canal sizes of individuals, the default ear-tips may not achieve a proper seal. Interchanging the ear-tips to a larger/smaller size will improve performance.

image4

REMOVING THE EAR-TIPS

1.Firmly hold the neck of the earphone.
2.Grip the opening of the ear-tip firmly with the other hand.
3.Pull ear-tip downwards gently until it is released from tip of the earphones.

image5

REPLACING THE EAR-TIPS

1.Firmly hold the neck of the earphone.
2.Push mouth of the ear-tip onto tip of the earphone.
3.As you apply pressure, use a gentle twisting motion until ear-tip is secured and in place.

6 | For gamers by gamers™

 

6. SAFETY AND MAINTENANCE

SAFETY GUIDELINES

In order to achieve maximum safety while using your Razer Adaro In-Ear Analog Earphones, we suggest that you adopt the following guidelines:

1.Should you have trouble operating the device properly and troubleshooting does not work, unplug the device and contact the Razer hotline or go to www.razersupport.com for support. Do not attempt to service or fix the device yourself at any time.
2.Do not take apart the device (doing so will void your warranty) and do not attempt to operate it under abnormal current loads.
3.Keep the device away from liquid, humidity or moisture. Operate the device only within the specific temperature range of 0°C (32°F) to 40°C (104°F). Should the temperature exceed this range, unplug and switch off the device in order to let the temperature stabilize within the optimal temperature range.
4.The Razer Adaro In-Ear Analog Earphones isolates external ambient sounds even at low volumes, resulting in lowered awareness of your external surroundings. Please remove the Razer Adaro In-Ear Analog Earphones when engaging in any activity that requires active awareness of your surroundings.
5.Listening to excessively loud volumes over extended periods of time can damage your hearing. Furthermore, legislation of certain countries permits a maximum sound level of 86db to affect your hearing for 8 hours a day. We therefore recommend that you reduce the volume to a comfortable level when listening for prolonged periods of time. Please, take good care of your hearing.

MAINTENANCE AND USE

The Razer Adaro In-Ear Analog Earphones requires minimum maintenance to keep it in optimum condition. Once a month we recommend you clean the device using a soft cloth or cotton swab with a bit of warm water to prevent dirt buildup. Do not use soap or harsh cleaning agents.

7 | razer™

 

7. LEGALESE

COPYRIGHT AND INTELLECTUAL PROPERTY INFORMATION

©2013-2014 Razer Inc. All Rights Reserved. Razer, the Razer Triple-Headed Snake logo, the Razer distressed word logo and other trademarks contained herein are trademarks or registered trademarks of Razer Inc. and/or its affiliated or associated companies, registered in the United States and/or other countries.

Razer Inc. (“Razer”) may have copyright, trademarks, trade secrets, patents, patent applications, or other intellectual property rights (whether registered or unregistered) concerning the product in this Quick Start Guide. Furnishing of this Quick Start Guide does not give you a license to any such copyright, trademark, patent or other intellectual property right. The Razer Adaro In-Ear Analog Earphones (the “Product”) may differ from pictures whether on packaging or otherwise. Razer assumes no responsibility for such differences or for any errors that may appear. Information contained herein is subject to change without notice.

LIMITED PRODUCT WARRANTY

For the latest and current terms of the Limited Product Warranty, please visit www.razerzone.com/warranty.

LIMITATION OF LIABILITY

Razer shall in no event be liable for any lost profits, loss of information or data, special, incidental, indirect, punitive or consequential or incidental damages, arising in any way out of distribution of, sale of, resale of, use of, or inability to use the Product. In no event shall Razer’s liability exceed the retail purchase price of the Product.

COSTS OF PROCUREMENT

For the avoidance of doubt, in no event will Razer be liable for any costs of procurement unless it has been advised of the possibility of such damages, and in no case shall Razer be liable for any costs of procurement liability exceeding the retail purchase price of the Product.

8 | For gamers by gamers™

 

GENERAL

These terms shall be governed by and construed under the laws of the jurisdiction in which the Product was purchased. If any term herein is held to be invalid or unenforceable, then such term (in so far as it is invalid or unenforceable) shall be given no effect and deemed to be excluded without invalidating any of the remaining terms. Razer reserves the right to amend any term at any time without notice.

9 | razer™

Leave a Reply 0

Your email address will not be published. Required fields are marked *


This site uses Akismet to reduce spam. Learn how your comment data is processed.